Top of the page

EMX 102-1 - Universal UL325 Monitored Thru Beam Photoeye (Receiver & Transmitter - no hoods)

Item No. EMX 102-1
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use. This universal UL325 thru

Description

The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.

This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment.

Kit includes:
IRB-MON -Transmitter, receiver
IRB-RX-SH - Receiver sunshield 

Features:
  • Type B1, non-contact sensor
  • UL325-2018 compliant
  • Lens-less design
  • Simple 2-wire connection
  • Relay contacts available
  • NEMA 4X enclosure
  • Selectable frequency modes
  • Operating Range: up to 115 ft. (35m)
  • Sensitivity adjustment: potentiometer
  • The IRB-MON universal UL325 thru beam photoeye has 4 monitoring interfaces:
    • Normally closed
    • Two-wire pulsed (2 freq)
    • Two-wire pulsed (3 freq)
    • 10k resistive termination
Specifications:
  • Operating range: up to 115 ft. (35m)
  • Sensitivity adjustment: potentiometer
  • Power indicator: Green LED
  • Detect indicator: Green LED
  • Mode selection switch: 3 modes, relay output, pulsed (3 frequency), pulsed (2 frequency)
  • Relay output operation: Light on/dark on selection
  • Relay output: Form C contacts (NO, COM, NC)
  • Resistive termination: 10k Ohm across NO contact
  • Power protection: Thermal fuse
  • Transmitter power cycle: >300mS (for use in configuration 0 Monitored)
  • Power supply: 6…35 VDC, 12…24VAC (configuration 0-relay only)
  • Current (config. 1 and 2): 15mA (12VDC, includes TX and RX wired in parallel)
  • Current (config. 0): 60mA (relay activated)
  • Operating temperature: -40°F…170°F (-40°C…77°C)
  • Environmental: NEMA 4X
  • Dimensions (L x W x H): 2.3” (57mm) x 2.6” (65mm) x 3.7” (94mm)
  • Weight: TX – 0.35 lbs. (159 g), RX 0.35 lbs. (159 g)
  • Connections: TX-2 terminal, RX-5 terminal

Specifications

Vendor Item No.
EMX-102-1
Item Category Code
SAFETY

EMX 102-1 - Universal UL325 Monitored Thru Beam Photoeye (Receiver & Transmitter - no hoods)

Item No. EMX 102-1
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use. This universal UL325 thru

Description

The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.

This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment.

Kit includes:
IRB-MON -Transmitter, receiver
IRB-RX-SH - Receiver sunshield 

Features:
  • Type B1, non-contact sensor
  • UL325-2018 compliant
  • Lens-less design
  • Simple 2-wire connection
  • Relay contacts available
  • NEMA 4X enclosure
  • Selectable frequency modes
  • Operating Range: up to 115 ft. (35m)
  • Sensitivity adjustment: potentiometer
  • The IRB-MON universal UL325 thru beam photoeye has 4 monitoring interfaces:
    • Normally closed
    • Two-wire pulsed (2 freq)
    • Two-wire pulsed (3 freq)
    • 10k resistive termination
Specifications:
  • Operating range: up to 115 ft. (35m)
  • Sensitivity adjustment: potentiometer
  • Power indicator: Green LED
  • Detect indicator: Green LED
  • Mode selection switch: 3 modes, relay output, pulsed (3 frequency), pulsed (2 frequency)
  • Relay output operation: Light on/dark on selection
  • Relay output: Form C contacts (NO, COM, NC)
  • Resistive termination: 10k Ohm across NO contact
  • Power protection: Thermal fuse
  • Transmitter power cycle: >300mS (for use in configuration 0 Monitored)
  • Power supply: 6…35 VDC, 12…24VAC (configuration 0-relay only)
  • Current (config. 1 and 2): 15mA (12VDC, includes TX and RX wired in parallel)
  • Current (config. 0): 60mA (relay activated)
  • Operating temperature: -40°F…170°F (-40°C…77°C)
  • Environmental: NEMA 4X
  • Dimensions (L x W x H): 2.3” (57mm) x 2.6” (65mm) x 3.7” (94mm)
  • Weight: TX – 0.35 lbs. (159 g), RX 0.35 lbs. (159 g)
  • Connections: TX-2 terminal, RX-5 terminal

Specifications

Vendor Item No.
EMX-102-1
Item Category Code
SAFETY

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.