Top of the page

AES EL00IG-K - e-Loop In-Ground Commercial Loop Kit (Exit Mode)

Item No. AES EL00IG-K
AES e-Loop Inground Commercial Loop Kit (EXIT MODE) | AES-EL00IG-K The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the

Description

AES e-Loop Inground Commercial Loop Kit (EXIT MODE) | AES-EL00IG-K

The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable Lithium battery, and can withstand almost any vehicle.

Note: Gate or door controller must have a dedicated open input and autoclose function enabled.

INCLUDES
  • 1 x e-Loop commercial inground Exit mode wireless detection module
  • 1 x single-channel transceiver (Trans-50)
  • 2 x Dyna bolts
  • 1 x Magnet
FEATURES
  • High-security 128-bit encryption.
  • Quick and easy installation
  • Magnetic Field Detection
  • Recesses into the driveway – 55mm inground height x 89mm diameter (2.1” x 3.5”).
  • Not affected by ground movement.
  • 14500 mA battery (included) giving up to 6-10 years of battery life (depending on mode).
  • Top access for changing battery.
  • Up to 50 meters range
MANUFACTURER'S WARRANTY PERIOD
2 Years

TECHNICAL SPECIFICATIONS
  • Radio
    • Frequency: 433.39 MHz
    • Modulation: FSK
    • Bitrate: 9.6 kbps
    • Bandwidth: 250 kHz
    • Antenna Type: PCB
    • Nominal Output Power: 10 dBm
    • Receive Sensitivity: -126.2 dBm
    • Security: 128-Bit AES Encryption
    • Spurious Emissions
      • 30 - 1000 MHz: < -56 dBm
      • 1 - 12.75 GHz: < -44 dBm
      • 1.8 - 1.9 GHz: < -56 dBm
      • 5.15 - 5.3 GHz: < -51 dBm
  • Power, Physical and Environment
    • Power: 1 * 3.6 V 14500ma
    • Dimensions: 88*88*55mm
    • Weight: 300g
    • Environment designed for inground (flush) mounting
    • IP68 ingress Protection
    • Operating Temp: -20° to 80° C (-4°F to 176°F)
    • Standby Power: 14μA
    • Activation Power: 50mA
COMPLIANCE
  • Safety: Tested to CE Approval
  • EMC: Tested to EN 301 489-1 V2.2.3 “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonized Standard for Electro Magnetic Compatibility” Including:
    • a) Emissions to EN 55032 “Electromagnetic compatibility of multimedia equipment”
    • b) Transmitter and receiver test to EN 300 220-1 V3.1.1 ‘Short Range Devices (SRD) operating in the frequency range 25MHz. to 1000MHz; Part 1: Technical Characteristics and methods of measurement.”
    • c) Immunity Tests to EN 301 489-1

Specifications

Vendor Item No.
EL00IG-K
Item Category Code
SAFETY

AES EL00IG-K - e-Loop In-Ground Commercial Loop Kit (Exit Mode)

Item No. AES EL00IG-K
AES e-Loop Inground Commercial Loop Kit (EXIT MODE) | AES-EL00IG-K The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the

Description

AES e-Loop Inground Commercial Loop Kit (EXIT MODE) | AES-EL00IG-K

The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable Lithium battery, and can withstand almost any vehicle.

Note: Gate or door controller must have a dedicated open input and autoclose function enabled.

INCLUDES
  • 1 x e-Loop commercial inground Exit mode wireless detection module
  • 1 x single-channel transceiver (Trans-50)
  • 2 x Dyna bolts
  • 1 x Magnet
FEATURES
  • High-security 128-bit encryption.
  • Quick and easy installation
  • Magnetic Field Detection
  • Recesses into the driveway – 55mm inground height x 89mm diameter (2.1” x 3.5”).
  • Not affected by ground movement.
  • 14500 mA battery (included) giving up to 6-10 years of battery life (depending on mode).
  • Top access for changing battery.
  • Up to 50 meters range
MANUFACTURER'S WARRANTY PERIOD
2 Years

TECHNICAL SPECIFICATIONS
  • Radio
    • Frequency: 433.39 MHz
    • Modulation: FSK
    • Bitrate: 9.6 kbps
    • Bandwidth: 250 kHz
    • Antenna Type: PCB
    • Nominal Output Power: 10 dBm
    • Receive Sensitivity: -126.2 dBm
    • Security: 128-Bit AES Encryption
    • Spurious Emissions
      • 30 - 1000 MHz: < -56 dBm
      • 1 - 12.75 GHz: < -44 dBm
      • 1.8 - 1.9 GHz: < -56 dBm
      • 5.15 - 5.3 GHz: < -51 dBm
  • Power, Physical and Environment
    • Power: 1 * 3.6 V 14500ma
    • Dimensions: 88*88*55mm
    • Weight: 300g
    • Environment designed for inground (flush) mounting
    • IP68 ingress Protection
    • Operating Temp: -20° to 80° C (-4°F to 176°F)
    • Standby Power: 14μA
    • Activation Power: 50mA
COMPLIANCE
  • Safety: Tested to CE Approval
  • EMC: Tested to EN 301 489-1 V2.2.3 “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonized Standard for Electro Magnetic Compatibility” Including:
    • a) Emissions to EN 55032 “Electromagnetic compatibility of multimedia equipment”
    • b) Transmitter and receiver test to EN 300 220-1 V3.1.1 ‘Short Range Devices (SRD) operating in the frequency range 25MHz. to 1000MHz; Part 1: Technical Characteristics and methods of measurement.”
    • c) Immunity Tests to EN 301 489-1

Specifications

Vendor Item No.
EL00IG-K
Item Category Code
SAFETY

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.