Apollo Gate Operators Model 1500 & 1550 Single Swing Gate Operator

Recommended for gates up to 14 ft. (4.3 m) in length and 400 lbs. (181 kg).
All Apollo Gate Operators have a one year limited warranty against manufacturing defects
NOTE: Operators DO NOT come with battery, radio equipment or AC & solar chargers (packages available below, stand alone items found in the accessories section)
BATTERY REQUIREMENTS: 12 volt car type battery. ApolloGate Operators recommends a maintenance-free, deep cycle marine battery- 105 amp/hour. (not supplied)
GENERAL DESCRIPTION: Apollo Gate Operators swing and slide gate operators are ready for installation upon receipt. A professional installer is recommended. Some welding is required for proper installation
SPECIAL APPLICATIONS: Can be used in push to open or pull to open applications. This permits the choice of having the power drive cylinder inside or outside the gate regardless of hinge left or right. Direct drive system attaches directly to the gate.
OPEN OR CLOSE CYCLE TIME: Each direction, 15 seconds.
BATTERY/CONTROL PANEL BOX: 18" (46 cm) x 18" (46 cm) x 8" (20 cm) Galvanized, Weather resistant NEMA 3R.
ACTUATOR: Rust proof linear; acme screw drive; self-lubricating gears. Supplied with 8 ft. (2.4 m) of cable. Externally adjustable limit switches.
POWER OUTAGE: In the event of electrical power outage, or significantly overcast days, a fully charged deep cycle marine battery (recommended) will provide up to 300 cycles or 30 days usage on a basic system before requiring a recharge.
CIRCUIT BOARD: all standard Apollo gate operators are shipped with the 635 / 636 circuit board. Features of this board include: automatic adjustable close timer, adjustable current sensitivity for automatic safety reverse, inputs for: exit loops, hold open loops, under gate loops, safety edges, free exit, probes, keypads, telephone entry systems, intercom systems, pushbuttons, locks, radio receivers