BD
LOOPS For installation under asphalt, pavers, or in concrete - 14 AWG loop wire design for superior performance Pre tested 3 ways with meg-ohm meter, inductance tester and live detector Installation kit includes: cable ties, ground stakes, and loop lead-in labels - EZ installation guide Loop wire meets UL standard 493 for direct burial - Pre-phased at factory for EZ hoop-up Made in the USA |
 |
||||||||||
 |
|
|
|
||||||||
 |
Prefabricated Loops RL24-40 Prefabricated Loop 4ft x 8ft RL32-40 Prefabricated Loop 6ft x 10ft RL36-40 Prefabricated Loop 6ft x 12ft RL44-40 Prefabricated Loop 6ft x 16ft RL52-40 Prefabricated Loop 6ft x 20ft EL24-60 Prefabricated Loop 4ft x 8ft EL32-60 Prefabricated Loop 6ft x 10ft |
EL36-60 Prefabricated Loop 6ft x 12ft EL44-60 Prefabricated Loop 6ft x 16ft EL52-60 Prefabricated Loop 6ft x 20ft EL24-100 Prefabricated Loop 4ft x 8ft EL32-100 Prefabricated Loop 6ft x 10ft EL36-100 Prefabricated Loop 6ft x 12ft EL44-100 Prefabricated Loop 6ft x 16ft EL52-100 Prefabricated Loop 6ft x 20ft |
|||||||||
|
|
|
|
||||||||
BDL E-Z E-Z Detector Cheker and E-Z Detector Cheker Jr. ( without green LED )  |
Small compact design that fits in your hand Color-coded clip/test leads store in base unit Green LED lights when detector is properly energizing the loop circuit (N/A on Jr.) Push RED button test to see if detector is picking up a trip Eliminates the need for a Mega OHM meter Allows for harness wiring check from detector to loop terminals within the gate operator Eliminates the need to stock the service truck with so many difference types of detectors Saves valuable time in trouble shooting in the field Reduces the chance of cutting in a new loop Never needs battery replacament. Protective fuse to safeguard unit if cannected to 110V Allows the opportunity to increase your profits by reducing your servicing time and reducing repeat service calls No air chamber in loop coil design No chance of phantom detection from ground vibrations No chance of loop coil floating to the surface during concrete pour |
||||||||||
|
|
|
|
||||||||
 |
ABOUT
TYPE UF-B UNDERGROUND CABLE UF-B Underground Feeder Cable's construction provides solid or stranded Type THHN/THWN conductors laid parallel with or without an uninsulated grounding conductor. An outer jacket of tough polyvinyl chloride (PVC), applied directly over the assembled conductors, provides protection against mechanical damage, moisture, chemicals and corosion. |
||||||||||
|
|
|
|
||||||||
| APPLICATIONS: Permitted for use underground including direct burial in earth as Feeder or Branch Circuit Cable where provided with overcurrent protection For use in interior wiring in wet, dry or corrosive locations under the recognized wiring methods of the National Electrical Code (NEC) Accaptable to be installed as a Non-Metalic Sheathed Cable in accordance with NEC Article 340.10(4) Acceptable for use in accordance with NEC Articles 300.4(B) and 340 FUTURES: Ul listed as type UF-B for direct burial E25682 Grease and chemical resisitant conductors Crush resistant Moisture, chemical and sunlight resistant jacket Conductors rated 90°C The amplicity shall be that of 60°C conductors and comply with NEC section 300.15 CONSTRUCTION: Conductors: Solid (per ASTM B-3) or stranded soft annealed uncoated copper (per ASTM B-8) Insulation: Polyvinyl chloride (PVC) conpound to thickness required by Underwriters Laboratories for Type THHN 90°C rated Color Code: 2 Conductors: Black, White 3 Conductors: Black, White, Red Conductor Jacket: Heat stabilized nylon Grounding Conductor: Uninsulated, soft annealed solid Assembly: Individual Type THHN/THWN conductors are laid parallel with (or without) a grounding conductor it is placed in the web between insluated conductors Temperature: 60°C wet or dry Rating: 600V SPECIFIC & STANDARDS: |
|||||||||||
|
|
|
|
||||||||
