The
Byan 500 Series is a residential swing gate
operator. As a light-duty operator, it should be subject to
no more than 60 cycles per hour. This operator is recommended
for gates 12 feet long or shorter that weight less than 1,500
lbs. Opening speed is approximately 12 seconds. It slows down
the last 5 to 10 degrees of the swing. Hydraulic locks in
both the open and closed positions. For gates 12 feet in length,
electric locks are recommended. In some states and cities
(in case of a power outage), the gate must be able to be pushed
open by the fire ore emergency vehicle. We can take out the
hydraulic check valve in the closed position. You must then
use an electric lock to keep the gate closed. With the operator
mounted inside the property, the operator can be installed
to swing inward or outward. Most mechanical operators must
be mounted on the side the gate will swing toward.
Variable Power
It is the most powerful model in its category. By simply regulating
the limiter valves it may be adapted to the required pressure.
Independent open or lock alignment.
Hydraulic
Safety By regulating the pressure to a suitable
level, our equipment operates gently but firmly. The gate
may even be stoped manually when in motion.
Thermal
Protection All units equipped with a thermal
probe which, in the event of overheating ensures that by cutting
off the power supply the operating is interrupted.
Eliminator SeriesSlows
down the final 5 degrees of travel in both directions. No
need for positive stops and has a very soft stop.
Ideal for Gates
A device which is specially designed to operate with precision
under the most demanding conditions. Various power rates and
functions may be modified for all types of gates.
No Maintenance
The oil-coated internal components and superior mechanical
quality exceed service life requirements and require virtually
no maintenance.
Quick
& Easy Installation Two brackets, simple assembly,
time-saving. No physical stops. |
| Model 500 |
115 VAC Single Phase
Built-in Thermal Overload |
| Model 500B |
220 VAC Single Phase
Built-in Thermal Overload |
| Capacitor Rating |
35 UF/40 UF/10 UF |
| Standard Working Pressure
|
1,650 PSI |
| Maximum Working Pressure
|
1,750 PSI |
| Pump |
Spur Gear .50 LTR/Min. |
| Motor |
1/6 Horsepower |
| Amperage Draw |
4 Amps |
| Operator Length (with
piston retracted and rear bracket and swivel joint installed)
|
27.72 inches |
| Operator Length (with
piston extended and rear bracket and swivel joint installed)
|
35.59 inches |
| Operator Width |
3.39 inches |
| Operator Height |
4.33 inches (w/lock cover)
|
| Speed to 90 Degrees |
12 Seconds |
| Piston Stroke |
200 mm (7.87 inches) |
| Ambient Operator Temperature
Range |
-60 to 220 Degrees F
|
| Hydraulic Fluid |
Tellus T-15 |
| Adjustable
Pressure Setting in Both Open and Closed Directions |
| Shipping Weight |
26 lbs. |
|
