| The Byan 800/900 Series
comes in three different styles and 2 different voltages.
800A/900A Standard Operator:
It is the most powerful model in its category.
By simply regulating the limiter valves it may be adapted
to the required pressure. Independent open or lock alignment.
800A/900A Long Operator:
By regulating the pressure to a suitable level, our equipment
operates gently but firmly. The gate may even be stoped
manually when in motion.
800A/900A Slow Speed:
All units equipped with a thermal probe which, in the event
of overheating ensures that by cutting off the power supply
the operating is interrupted.
Variable Power
It is the most powerful model in its category. By simply
regulating the limiter valves it may be adapted to the required
pressure. Independent open or lock alignment.
Hydraulic Safety
By regulating the pressure to a suitable level, our equipment
operates gently but firmly. The gate may even be stoped
manually when in motion.
Thermal Protection
All units equipped with a thermal probe which, in the event
of overheating ensures that by cutting off the power supply
the operating is interrupted.
Eliminator SeriesSlows
down the final 5 degrees of travel in both directions. No
need for positive stops and has a very soft stop.
Ideal for Gates
A device which is specially designed to operate with precision
under the most demanding conditions. Various power rates
and functions may be modified for all types of gates.
No Maintenance
The oil-coated internal components and superior mechanical
quality exceed service life requirements and require virtually
no maintenance.
Quick & Easy Installation
Two brackets, simple assembly, time-saving. No physical
stops.
|
| Electric Motor |
Single Phase Built-in
Thermal Overload |
| 800A Series Power Supply |
220 VAC, 60 Hz. |
| 900A Series Power Supply |
115 VAC, 60 Hz. |
| Capacitor
Rating |
10 UF (800A)
35 UF/40 UF (900A) |
| Standard Working Pressure
|
1,650 PSI |
| Maximum Working Pressure
|
1,750 PSI |
| Pump |
Spur Gear .66 LTR/Min. |
| Motor |
1/6 Horsepower |
| Amperage Draw |
4 Amps |
| Operator Length (with
piston retracted and rear bracket and swivel joint installed)
|
754 to 904 mm (29-11/16
to 35-5/8 inches) |
| Operator Length (with
piston extended and rear bracket and swivel joint installed)
|
1,004 to 1,304 mm (39-1/2
to 51-5/16 inches) |
| Operator Width |
3-3/8 x 3-3/8 inches
|
| Operator Height |
4-5/16 inches (w/lock
cover) |
| Speed to 90 Degrees |
13 Seconds |
| Piston Stroke |
250 mm (9-7/8 inches)
400 mm (15-3/4 inches) |
| Ambient Operator Temperature
Range |
-60 to 220 Degrees F
|
| Hydraulic Fluid |
Tellus T-15 |
| Adjustable
Pressure Setting in Both Open and Closed Directions |
| Shipping Weight (Normal/Slow
Speed) |
32 lbs. |
| Shipping Weight (Long)
|
27 lbs. |
|