DITEK Surge Protection
A division of the DITEK Corporation. Manufacturing quality surge protection for the most demanding environments... DITEK's product quality does not change by product or price point. The features may change, but quality is consistent. This is our philosophy. From DITEK's top of the line large industrial products to our smallest modular products, quality is the top priority.
 



DTK-2LVLPF
Class: Hard Wired Low Voltage Surge Suppressor
Installation Point: Point of Use
Connection Method: Screw terminals, #22-#14 awg wire
Continuous Current: 500mA
Response Time: <5 nSec
MCOV: 30VAC, 38 VDC
AC Protection Modes: All wires protected
Service Voltage: 24VDC
Max Surge Current: 4,000 Amps
Max Energy Dissipation: 56 Joules

 



DTK-4LVXR
Class: Low voltage telephone entry system protector
Installation Point: Grounding point for telephone entry system
Connection Method: Screw terminals, #22-#14 awg wire
Continuous Current: 16 Amps (Power); 150 mAmps (Tip and Ring)
Response Time: <5 nSec MCOV: 38VDC (Power) 175VDC (Tip and Ring) 38VDC (Door Release Contact)
Operating Frequency: 0 - 400 Hz
AC Protection Modes: All wires protected
Service Voltage: 12/24VDC (Power), 120V (Tip and Ring) 24V
Max Surge Current: 2,000 Amps (Power); 9,000 Amps (Tip and Ring)
Max Energy Dissipation: 17 Joules (Power), 76 Joules (Tip and Ring), 3 Joules (Dry Contact) per pair


DTK-4LVTEP
Class: Low voltage telephone entry system protector
Installation Point: Grounding point for telephone entry system
Connection Method: Screw terminals, 14-22 awg wire
Continuous Current: 12V/24V Power - 16 Amps, Data/Telco Tip and Ring - 150 mAmps
Response Time: <1nSec Data, <5nSec Power and Telco
MCOV: 18VDC (12V Power), 38 VDC (24V Power), 5 VDC (Data), 175 VDC (Telco)
Operating Frequency: 0 - 400 Hz
AC Protection Modes: All wires protected
Service Voltage: 12 VDC/24 VDC (Power), <5VDC (Data), 120V (Telco)
Max Surge Current: 2,000 Amps (12V/24V Power, 9,000 Amps (Telco), 1200 Watts (Data) (per pair)
Max Energy Dissipation: 8
 


DTK-120HW
Class: AC Hard Wired Transient Voltage Surge Suppressor
Installation Point: Single Circuit
Agency Approvals: UL, cUL 1449, IEEE C62.41B
Connection Method: Hardwire parallel connection
Continuous Current: Unlimited (Parallel Installation)
Response Time: <5nSec Installed, <1nSec Component Level
MCOV: 130 VRMS/185 VPK
Operating Frequency: 50/60Hz
AC Protection Modes: L - N, L - G, N - G
Service Voltage: 110 / 125 VAC
Diagnostics: Indicator Light
EMI/RFI Noise Filtering: Yes
Max Surge Current: 22,500 Amps
Max Energy Dissipation: 190 Joules
Suppressed Voltage Rating: 600V
Operating Temperature Range: -40 degrees C. to +85 degrees C.
Operating Environment: Outdoor use, out of direct weather (5% to 100% non-condensing)
MTBF: 6,000,000 Hours, MIL - 217H/Bellcore method

 


DTK-240HW
Class: AC Hard Wired Transient Voltage Surge Suppressor
Installation Point: Single Circuit
Connection Method: Hardwire parallel connection
Continuous Current: Unlimited (Parallel Installation)
Response Time: <5 nSec installed, <1 nSec component level
MCOV: 260 VRMS (L-L) 130VRM (L-N, L-G, N-G)
Operating Frequency: 50/60Hz
AC Protection Modes: L- N, L- G, N- G
Service Voltage: 120 / 240 Split Phase
Diagnostics: Indicator Light
EMI/RFI Noise Filtering: Yes
Max Surge Current: 27,000 Amps
Max Energy Dissipation: 228 Joules


 
DTK-8FF
Class: 8 Outlet Professional Grade Surge Suppressor with
Installation Point: Receptacle
Agency Approvals: UL 1449, UL 497A
Connection Method: Plug-in with 6ft. cord
Continuous Current: 15A
Response Time: <1nSec
MCOV: 125VAC
Operating Frequency: 50/60 Hz
AC Protection Modes: L- N, L- G, N- G
Service Voltage: 110 VAC
Diagnostics: Light for surge protection, light for ground, audi
EMI/RFI Noise Filtering: 56 dB ~ 150 KHz ~ 100 MHz
Max Surge Current: 36,000A
Max Energy Dissipation: AC: 1110 Joules - Fax/Modem: 160 Joules
Suppressed Voltage Rating: 330V


DTK-BU450 Plus
Class: 450VA Back up plus full time surge protection
Installation Point: Receptacle
Agency Approvals: UL 1449, UL 497A, UL497B, UL 1283, UL 1778, UL 136
Connection Method: Plug-in with 6ft. cord
Continuous Current: 12A
Response Time: <1nSec (surge)
Operating Frequency: 50/60 Hz
AC Protection Modes: L- N, L- G, N- G
Service Voltage: 125VAC
Diagnostics: Battery strength, surge protected, grounded
EMI/RFI Noise Filtering: 58 dB 150 KHz ~ 100 MHz
Max Energy Dissipation: 1530 Joules A/C, 160 Joules Fax/Modem
Suppressed Voltage Rating: 330V

 

 


DTK-DSS
Class: 8 Outlet Professional Grade Surge Suppressor with
Installation Point: Receptacle
Agency Approvals: UL 1449, UL 497A
Connection Method: Plug-in with 6ft. cord
Continuous Current: 15A
Response Time: <1nSec
MCOV: 125V
Operating Frequency: 50/60 Hz
AC Protection Modes: L- N, L- G, N- G
Service Voltage: 110 VAC
Diagnostics: Light for surge protection, light for ground, audi
EMI/RFI Noise Filtering: 56 dB @ 150 KHz - 100 MHz
Max Surge Current: 36,000A
Max Energy Dissipation: AC: 1110 Joules
Suppressed Voltage Rating: 330V

 

     

 

 
 
 
 
Home  •  Products  •  Employment •  Sitemap •  Links  •  Contact  • Quotes  •  UL325 •  Vendors  •  Used & Surplus •  Reviewlinks •  Repairs •  Returns •  News

AAID AAS Aiphone Allstar All-O-Matic Alvarado Turnstyles Albano Apollo AWID B&B Armor BD Loops Byan Systems Click2Enter
Counsel Cypress Cyrex Diablo Ditek Doorking DC Solutions Eagle EDI Elite EMX Industries EPS FAAC Genie Guardian Traffic Systems
Guardian Gate Hardware Heddolf Hy-Security Invisa Keedex Keri Systems Liftmaster Linear Miller Edge Multicode National Loop
Osco Pedestal CEO Precision Gate Rollers Preferred Technologies RCS Ramset Reno A&E Ritron Rofu Securakey Securitron
Seco-Larm Select Engineered Systems Sentex SOS Southland Printing Sirit Trigon Tomar Tymetal Gates US Automatic Viking Access

Copyright © 2005, Southwest Automated Security LLC. All rights reserved.
Webmaster
Southwest Automated Security (SAS) is a wholesale distributor for access entry control and gate operator equipment.