 
9100 |
 |
 |
|
|
|
|
APPLICATIONS: The Model 9100
operator is designed to operate vehicular slide gates in residential
and commercial applications. The 9100 is designed so that it
can easily be mounted in the front, center or rear of the gate
without any costly and time consuming field modifications. In
addition, the operator can be pad or post mounted to meet any
installation requirements.
ADVANCED FEATURES: Self-adjusting, no maintenance
limits. Partial-open feature. Anti-tailgating feature. Gate
tracker reporting output. Ports for plug-in loop detectors.
Two convenience outlets. Fail-safe release (fail-secure optional).
Programming switches. Built-in reset switch. Built-in power
On/Off switch.
|
 |
9100
Manual
OPTIONS AVAILABLE WITH THIS OPERATOR: Stainless
steel housing. #40 chain. Nickel plated chain. Stainless steel
chain. Plug-in loop detectors. Heater kit for cold environments.
Base plate to post mount this operator |
|
|
SPECIFICATIONS: Model 9100 Maximum
gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes
gate is on level ground, in good condition with properly adjusted
hardware. Other external factors may affect the performance
of the gate operator.) 1/2 HP continuous-duty motor. 115 VAC,
5.4 Amps. Operator is shipped with chain brackets and 20-feet
of #41 chain. Class I, II, III and IV applications. Compliant
with UL 325 and 991. ETL Listed. (Note: To be compliant with
UL 325 and industry safety guidelines, a secondary entrapment
prevention device(s) is required to be installed with this gate
operator. Your professional DKS system installer can provide
you with more details on these devices and on current industry
safety standards.)
|
|
9150 |
|
|
|
|
|
|
APPLICATIONS: Model
9150 operators are designed to operate vehicular slide gates
in residential, commercial and industrial applications. These
operators are designed so that they can easily be mounted in
the front, center or rear of the gate without any costly and
time consuming field modifications. In addition, the operators
can be pad or post mounted to meet any installation requirements.
The 9150 can be equipped with a factory installed DC Convenience
Open option which will automatically open the gate in the event
of a power outage.
ADVANCED FEATURES: Self-adjusting, no maintenance
limits. Partial-open feature. Anti-tailgating feature. Gate
tracker reporting output. Ports for plug-in loop detectors.
DC Powered Convenience Open (Optional). Two convenience outlets.
Fail-safe release (fail-secure optional). Programming switches.
Built-in reset switch. Built-in power On/Off switch.
|
|
9150
Manual
OPTIONS AVAILABLE: DC powered convenience open.
Stainless steel housing. Nickel plated chain. Stainless steel
chain. Plug-in loop detectors. Heater kit for cold environments.
Base plate to post mount this operator |
|
|
SPECIFICATIONS: Model 9150 with 1/2 HP
Motor: Maximum gate length 30-feet. Maximum gate weight
1000 pounds*. (*Assumes gate is on level ground, in good condition
with properly adjusted hardware. Other external factors may
affect the performance of the gate operator.) 1/2 HP continuous-duty
motor. 115 VAC 230 VAC 460 VAC Operator is shipped with chain
brackets and 20-feet of #40 chain.
Model 9150 with 1 HP Motor: Maximum gate length
45-feet. Maximum gate weight 1500 pounds*. (*Assumes gate is
on level ground, in good condition with properly adjusted hardware.
Other external factors may affect the performance of the gate
operator.) 1 HP continuous-duty motor. 115 VAC 230 VAC 460 VAC
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications. |
|
| |
|
|
|
|
|
|
|
|
9200 |
|
|
|
|
|
|
APPLICATIONS: Model 9200 operators
are designed to operate vehicular slide gates in limited (Class
III) and restricted (Class IV) applications only. These operators
should never be used in applications serving the general public.
These operators are designed so that they can easily be mounted
in the front, center or rear of the gate without any costly
and time consuming field modifications. Center mounting the
operator requires an optional pedestal mounting base.
ADVANCED FEATURES: Direct driven limit nuts.
Partial-open feature. Anti-tailgating feature. Gate tracker
reporting output. Ports for plug-in loop detectors. Two convenience
outlets. Fail-secure operation, includes crank for manual operation.
Programming switches. Built-in reset switch. Built-in power
On/Off switch.
|
|
9200
Manual
OPTIONS AVAILABLE: Heavy-duty pedestal mounting
stand. (Recommended for gates over 30-feet to allow use of a
chain support rail). Plug-in loop detectors. Heater kit for
cold environments |
|
|
SPECIFICATIONS: Model 9200: Maximum
gate length 100-feet. Maximum gate weight 3000 pounds*. (*Assumes
gate is on level ground, in good condition with properly adjusted
hardware. Other external factors may affect the performance
of the gate operator.) 40:1 gear reduction running in a continuous
oil bath. 1 HP continuous-duty motor. 115 VAC 208 VAC 230 VAC
460 VAC Operator is shipped with chain brackets and 20-feet
of #60 chain. Class III and IV applications only. Compliant
with UL 325 and 991. ETL Listed. (Note: To be compliant with
UL 325 and industry safety guidelines, a secondary entrapment
prevention device(s) is required to be installed with this gate
operator. Your professional DKS system installer can provide
you with more details on these devices and on current industry
safety standards.) Dimensions: 16"W x 34"H x 16"D
|
|
|
| |
|
|
|
|
|
|
|
|
9300 |
|
|
|
|
|
|
APPLICATIONS: The Model 9300 operator
is designed to operate vehicular slide gates in residential and commercial
applications. The 9300 is designed so that it can easily be mounted
in the front or rear of the gate without any costly and time consuming
field modifications. This operator is designed to be pad mounted.
The 9300 can be equipped with a factory installed DC Convenience Open
option which will automatically open the gate in the event of a power
outage.
ADVANCED FEATURES: Direct driven manual limits. Anti-tailgating
feature. Gate tracker reporting output. Ports for plug-in loop detectors.
DC Powered convenience open (optional). Two convenience outlets. Fail-safe
release (fail-secure optional). Programming switches. Built-in reset
switch. Built-in power On/Off switch. |
|
9300
Manual
OPTIONS AVAILABLE:
DC powered convenience open. Nickel plated chain. Stainless steel
chain. Plug-in loop detectors. Heater kit for cold environments |
|
|
SPECIFICATIONS: Model 9300: Maximum
gate length 35-feet. Maximum gate weight 1000 pounds*. (*Assumes gate
is on level ground, in good condition with properly adjusted hardware.
Other external factors may affect the performance of the gate operator.)
15:1 gear reduction running in a continuous oil bath. 1/2 HP continuous-duty
motor. 115 VAC, 5.4 Amps. Operator is shipped with chain brackets
and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant
with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325
and industry safety guidelines, a secondary entrapment prevention
device(s) is required to be installed with this gate operator. Your
professional DKS system installer can provide you with more details
on these devices and on current industry safety standards.) Dimensions:
21"W x 27"H x 15.5"D
|
|
|
|
