 
6300 |
 |
 |
|
|
|
|
APPLICATIONS: The
6300 series operators are designed to operate vehicular swing
gates in residential, commercial and industrial applications.
These operators are designed so that they can be either pad
or post mounted without any costly and time consuming field
modifications. You need to specify which mounting method when
ordering. The unique design of these operators allows the gate
arm to attached to the bottom rail of the gate. These operators
can be equipped with a factory installed DC Convenience Open
option which will automatically open the gate in the event of
a power outage.
ADVANCED FEATURES: Self-adjusting, no maintenance
limits. Overlap feature for dual swing gate operation. Designed
with a built-in primary and secondary entrapment prevention
system. Ports for plug-in loop detectors. Two convenience outlets.
Fail-safe release. Tamper detect circuit. DC Powered convenience
open (optional). |
 |
6300
Manual
OPTIONS AVAILABLE
Master / slave connection cable (slave operator is shipped with
50-feet of cable). Post or pad mount. Plug-in loop detectors.
Heater kit for cold weather. |
|
|
SPECIFICATIONS: Model 6300
with 1/2 HP Motor: Maximum gate width 18-feet. Maximum gate
weight 700 pounds*. Swings gate 90 degrees in approximately
15-seconds. 1/2 HP continuous-duty motor. 115 VAC. 230 VAC.
460 VAC. Class I, II, III and IV applications.
Model 6300 with 1 HP Motor: Maximum gate width 22-feet. Maximum
gate weight 800 pounds*. Swings gate 90 degrees in approximately
15-seconds. 1 HP continuous-duty motor. 115 VAC. 230 VAC.
460 VAC. Class I, II, III and IV applications |
|
6400 |
|
|
|
|
|
|
APPLICATIONS: THE
MODEL 6400 installs underground making it virtually invisible
and satisfies the most sophisticated automation needs without
being detrimental to the original gate design. Invisible and
powerful, the motor/drive mechanism is constructed in die-cast
aluminum with a special corrosion-proof treatment, and because
the drive unit is gear driven, there is no need to worry about
hydraulic leaks, check valves or pumps. The underground self-supporting
foundation box is built from corrosion-proof steel and has a
galvanized steel cover. A lockable manual release lever is designed
so that it can be operated from inside or outside the gate.
|
|
6400
Manual
OPTIONS AVAILABLE WITH THIS OPERATOR:
Master / slave connection cable.
Magnetic gate lock.
Plug-in loop detectors. |
|
|
ADVANCED FEATURES: Internal
adjustable limit switches,Slow start / slow stop,Overlap feature
for dual swing gate operation,Magnetic lock output,Ports for
plug-in loop detectors,Operates on 24 Volt DC power,Separate
control panel and Keyed release for manual operation
SPECIFICATIONS: Model 6400: Maximum gate
width 10-feet. Maximum gate weight 750 pounds .Swings gate
90 degrees in approximately 18-seconds, 110 degrees maximum
gate opening. 24 VDC. Class I applications. Dimensions (Underground
Box Dimensions): 17.2"W x 12.4"H x 6.4"D (Control
Box Dimensions):12.25"W x 16.25"H x 4"D |
|
| |
|
|
|
|
|
|
|
|
601/602 |
|
|
|
|
|
|
APPLICATIONS: These actuators
are designed to operate vehicular swing gates in residential,
applications where side room is minimal. Actuators install directly
on the swing gate eliminating the need for any mounting post
or concrete mounting pads. Control panel is mounted separately
from actuators.
ADVANCED FEATURES: Self-adjusting, no maintenance
limits.Plug-in loop detectors simplify installation.Gate Trackerª
reporting output provides operator data to companion access
controller (DoorKing 1803PC, 1815, 1817, 1818).Overlap feature
for dual gate applications.
|
|
601/602
Manual
|
|
|
SPECIFICATIONS: Operates vehicular
swing gates up to 10 (601) and 13 (602) feet long .Designed
with safety as the number 1 priority, these operators feature
an electronic and mechanical inherent reverse system. DoorKing
operators are known in the industry as being the safest vehicular
gate operators available Manual keyed release.
|
|
|
|
|
