SL-3000-UL Commercial Slide Gate Operator (1/2 hp) for use in high traffic applications. Capable of continuous cycles daily. The Sl-3000-Ul™ is smooth and exceptionally quiet. This unit can handle continuous cycles daily with gates up to 1000 lbs. and 37 ft. in length with a traveling speed of 12 inches per second. It is designed for high traffic applications such as heavily accessed gated communities and commercial buildings.

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles 75 cycles per hour with a 600 pound gate
Dimensions Length = 18in x Width = 19in x Height 25in
Emergency Release The gate is easily opened by turning the release handle. the best option is our DC-1000SL
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 37 feet maximum gate length
Motor 1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings
Output Shaft 1 inch cold rolled steel
Travel Speed 12 inches per second average gate speed
Warranty Seven(7) years for single home use and five(5) years for commercial use
Weight Capacity 1000 pounds maximum gate weight
Worm Gear Reduction 30-to-1 worm gear reduction in an oil bath

CSW-200-UL Commercial Swing Gate operator for use in high traffic applications. This is our most popular swing gate operator.The CSW-2000-UL is designed for high traffic applications such as heavily accessed gated communities and commercial buildings. It is capable of handling gates up to 600 lbs. and 18' at 75 cycles per hour with normal ambient temperatures. The most popular of all swing gate operating systems nationwide, it is designed with the "non-scissor action" arms that greatly reduce the risk of injury.

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles 75 cycles per hour with a 600 pound gate
Dimensions Length = 20.5in x Width = 15in x Height 28in
Emergency Release The gate is easily opened by turning the release handle. the best option is our DC-1000CSW
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 18 feet maximum gate length
Motor 1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings
Output Shaft 2.5 inch cold rolled steel
Travel Speed 90° opening in 13-15 seconds
Warranty Seven(7) years for single home use and five(5) years for commercial use
Weight Capacity 600 pounds maximum gate weight
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath.

CSW-200-UL-ST Stainless Steel Swing Gate Operator with robust stainless steel cover The CSW-200-ST offers the same CSW-200-UL machine with a stainless steel cover option. This operator is equipped with a robust, 16 gauge, powder coated stainless steel cover, finished with an embossed architectural design.

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles 75 cycles per hour with a 600 pound gate
Dimensions Length = 20.5in x Width = 15in x Height 28in
Emergency Release The gate is easily opened by turning the release handle. the best option is our DC-1000CSW
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 18 feet maximum gate length
Motor /2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings
Output Shaft 2.5 inch cold rolled steel.
Travel Speed 90° opening in 13-15 seconds
Weight Capacity 600 pounds maximum gate weight.
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath

SL-3000-UL-DM Dual Motor Commercial Slide Gate Operator for use in high temperature environments. One motor opens the gate, the other closes it. The SL-3000-UL-DM™ uses a unique, patented, dual motor feature. One motor opens the gate and the other one closes it, unlike any other operator in the world. Because of this feature the operator can function in less than ideal conditions, such as desert environments, and not overheat the motors. It is capable of continuous cycles on gates up to 37' and 800 lbs.The SL-3000-UL-DM™ is specified for use at heavily accessed high traffic areas such as multiple family communities with 250 or more homes in high ambient temperature applications

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles 75 cycles per hour with a 600 pound gate
Dimensions Length = 18in x Width = 19in x Height = 25in
Emergency Release The gate is easily opened by turning the release handle. the best option is our DC-1000SL
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 37 feet maximum gate length
Motor Equipped with two 1/2 hp parking gate motors. One motor opens the gate, the other one closes it
Output Shaft 1 inch cold rolled steel
Travel Speed 12 inches per second average gate speed
Weight Capacity 800 pounds maximum gate weight
Worm Gear Reduction 30-to-1 worm gear reduction in an oil bath

Commercial Swing Gate Operator with two 1/2 hp motors. One motor opens the gate, the other closes it. The CSW-200-UL-DM™ uses a unique, patented, dual motor feature. One motor opens the gate and the other one closes it, unlike any other operator in the world. Because of this feature the operator can function in less than ideal conditions, such as desert environments, and not overheat the motors. The CSW-200-UL-DM™ is specified for use at heavily accessed high traffic areas such as multiple family communities with 250 or more homes in high ambient temperature applications

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles 75 cycles per hour with a 600 pound gate
Dimensions Length = 24.5in x Width = 15in x Height = 285in
Emergency Release Can be easily opened by turning the emergency handle 180°. The best option is our DC-1000
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 18 foot gate length, max.
Motor Equipped with two 4.7 AMP, 115VAC, 1/2hp instant reversing motors. One motor opens the gate, the other closes it
Output Shaft 2.5 inch cold rolled steel
Travel Speed 90° opening in 13-15 seconds
Weight Capacity 800 pounds
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath

SL-3000-UL-1HP One Horsepower Slide Gate Operator that uses two 1/2 horsepower motors working together to equal one horsepower. For use on heavy gates The SL-3000-UL-1HP is our most powerful slide gate operator. This operator was designed with heavy gates in mind. It delivers 210 pounds of pulling torque and is capable of 35 cycles per hour on gates up to 2000 pounds and 37 feet in length. Equipped with two 1/2 horsepower motors that motors and a heavy duty transmission. It is the perfect choice for large and heavy wrought iron gates

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles 35 cycles per hour with a 36 foot gate
Dimensions Length = 18in x Width = 19in x Height = 25in
Emergency Release The hand crank is standard
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 37 feet maximum gate length
Motor Equipped with two 1/2 hp parking gate motors that work together equaling one horsepower
Output Shaft 1 inch cold rolled steel
Travel Speed 12 inches per second average gate speed
Weight Capacity 2000 pounds maximum gate weight
Worm Gear Reduction 30-to-1 worm gear reduction in an oil bath

CSW-200-UL-1HP Heavy Duty, One HP Swing Gate Operator (1/2 hp) for use in high traffic applications. Capable of continuous cycles daily. The Sl-3000-Ul™ is smooth and exceptionally quiet. This unit can handle continuous cycles daily with gates up to 1000 lbs. and 37 ft. in length with a traveling speed of 12 inches per second. It is designed for high traffic applications such as heavily accessed gated communities and commercial buildings.

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance
Cycles Capable of 60 cycles per hour
Dimensions Length = 24.5in x Width = 15in x Height = 285in
Emergency Release Can be easily disconnected by turning the emergency handle 180°
Finish All metal parts are gold zinc plated for rust proof protection
Gate Length 20 foot gate length, max
Motor Equipped with two 4.7 AMP, 115VAC, 1/2hp instant reversing motors that work together, equaling 1hp
Output Shaft 2.5 inch cold rolled steel
Swing Arm Non-scissor type arm action
Travel Speed 90° opening in 13-15 seconds
Weight Capacity 1000 pounds
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath

Hercules 10 Commercial Overhead Gate OperatorDesigned for 8' overhead gates, the smartest choice for low clearance high traffic underground parking garages. Designed for parking garages, Hercules is carefully engineered to operate without vibration or noise, unlike any other overhead gate operator on the market. Designed with quality in mind, Hercules has features that most companies have not even considered including on their overhead operators. It is equipped with a 40 to 1 gear reducer/box that is lubricated by an oil bath and provides smooth and very quiet operation. To further ensure quiet operation, the Hercules is equipped with four heavy-duty noise isolators. The high quality instant reversing parking gate motor is capable of continuous operational cycles per day and has digital overload motor protection. Hercules has a key release and there are no exposed components, therefore greatly reducing the risk of injury. Since Hercules is only 8 inches thick, up to 10 inches thinner than other overhead operators, it is a better and safer choice for all overhead gates, and the smartest choice for low clearance parking lots.

MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Dimensions 141 in(L) x 19 in(W) x 8 in (H)
Finish All metal parts are gold zinc plated for rust proof protection.
Gear Reducer The C-mounted continuous cycle motor is the same 1/2 hp Instant reversing parking gate motor used on most barrier gates. 40-to-1 gear box allows smooth and quiet operation.
Key Release Hercules comes with an manual disconnect equipped with a security key in case of a power failure.
Noise Isolators Hercules uses Heavy-Duty rubber attachments to prevent noise and vibration.
Trolley Assembly The Trolley Assembly Operates on 6 UHMW rollers for high performance and reliability.

ELECTRICAL SPECIFICATIONS
Alarm If the gate hits a vehicle twice while opening or closing, the system will shut down and an alarm will sound for five minutes. After five minutes, the system will automatically reset itself. To reset the system manually, a reset button must be used.
Alternate Outputs With Omni Option board, three push button command control, burglar alarm input and output.
Burglar Alarm With Omni Option board, interfaces with existing home alarm or alarm output.
Digital Motor Protection Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches, and stops.
Electronic Inputs Radio receiver, key switch, hold open loop, center loop, telephone entry system, computer input, fire department key switch, and 3-push-button station.
ERD Sensor If the gate hits a vehicle while closing it re-opens. If it hits a vehicle while opening it stops, reverses 4 to 6 inches and stops again.
Gate Traveling Time Adjusted by a precision mechanical device and electrical limit switch system.
Integrated Loop Detectors Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and hold open loop.
Modular Board Uses LEDs to indicate all input and output functions of the gate operator.
Motor Drive Solid state electronic motor drive system is incorporated into the board.
Power Input Controls power input to the board with convenient switch.
Power Management Board has electronic power management and over current shutdown & automatic recovery.
Soft Stop Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy.
Spike Suppressors 20,000 Amps and near lightning protection with modular omni surge suppressor. Initial response time: 0.000000000001 seconds.
Three Push Button Control On board gate operator control for close, stop and open.
Timer Adjustable timer can be set from 3-60 seconds.