 
| |
222 Series Slide Gate Operator
Heavy, Commercial, Industrial & Residential duty models 5 year
warranty |
 |
 |
More Information
Manual
222 SS - 1 Hp motor
gates up 1000lbs
1 feet / sec open
222 E - 1 Hp motor
gates up 4000lbs
1 feet / sec open
222 EX - 2 Hp motor
gates up 4000lbs
2 feet / sec open
222 X1 - 2 Hp motor
gates up 8000lbs
1 feet / sec open
222 CF - 1 Hp motor
gates up 1000lbs
1.2 feet / sec open
222 CE - 1 Hp motor
gates up 4000lbs
1.2 feet / sec open
222 CX - 2 Hp motor
gates up 4000lbs
2 feet / sec open
444 XS - 5 Hp motor
gates up 10000lbs
10 feet / sec open |
The 222 Series Slide Gate Operator series come in
several versions, 1Hp, 2Hp and 5Hp versions available. Battery operated
versions available. Rigid drive rails are inherently and perceptively
more secure than unsightly, high-maintenance chain and gear systems.
add an air of distinction to your community with the sliding gate
that miraculously and effortlessly moves small to large sliding gates
without a visible moving parts (except the gate). The 222 Series operators
features power transmission system. Its polyurethane drive wheel treads
eliminate the high wear metal to metal contact of conventional chain-drive
systems. Get rid of dangling, rusty, maintenance-prone chain and gearbox
systems, replacing with a two decade proven low maintenance, powerful
hydraulic system. The concept of the fixed-rail hydraulic slide gate
operator was pioneered by HySecurity over twenty years ago, and today
the state-of-the art 222 Series is the most reliable gate operator
on the market
222 Series Slide Gate Operator Specifications
operation is by means of rigid metal rail passing between two wheels,
driven by its own hydraulic motor
the drive assembly is mounted on 1/4" thick steel channel.
grip on the rail is adjustable without tools, and capable of instantly
releasing the drive wheels from rail.
drive assembly support arms are cast aluminum with reinforcing ribs
to prevent excessive flexion. The arms pivot on a 3/4" diameter
stainless steel shaft, with bronze bushings
mounting bolts are concealed in the interior of the operator
soft stop feature prevents shock loads to the gate and drive.
limit switches read the true position of the gate
chassis is formed steel plate, and incorporates unibody construction
to assure structural integrity
cover and chassis are finished with a five step baked-on powder paint
job to provide excellent corrosion resistance.
all components are designed for easy removal during service
hydraulic hoses and electrical cords are fitted with quick disconnect
ends
hydraulic system features the latest technology, modular main folds
and individually replaceable cartridge valves.
fully compatible with all standard access control equipment
extended five-year warranty
 |
| |
| 222
SERIES SLIDE GATE OPERATORS |
| Model |
Description |
Finish and lock options |
222 SS ST |
1Hp motor, for
gates up to 1000lbs, 1 feet / sec speed, 6" wheels both driven,
soft stop, maximum run timer, optional delay on reverse, power
coat over zinc plating |
green powder paint
flame spray galvanized |
222 E ST |
1Hp
motor, for gates up to 4000lbs, 1 feet / sec speed, 6" wheels
both driven, soft stop, maximum run timer, brake valves and
delay on reverse |
green powder paint
flame spray galvanized |
222 EX ST |
2Hp motor, for
gates up to 4000lbs, 2 feet / sec speed, 8" wheels, both driven,
soft stop, maximum run timer, brake valves and delay on reverse |
green powder paint
flame spray galvanized |
222 X1 ST |
2Hp
motor, for gates up to 8000lbs, 1 feet / sec speed, 8" wheels
both driven, soft stop, maximum run timer, brake valves and
delay on reverse |
green powder paint
flame spray galvanized |
222 CF ST |
1Hp motor, for gates
up to 1000lbs, 1.2 feet / sec speed, 6" wheels both driven,
soft stop and delay on reverse, maximum run timer, extra relay
to read gate position, external interlock connection terminals,
additional delay timer allows external locks to disengage
before gate moves, gray powder coat finish
over full zinc plating standard |
green powder paint
flame spray galvanize
cabinet lock
padlock
1010 series lock |
222
CE ST |
1Hp
motor, for gates up to 4000lbs, 1.2 feet / sec speed, 6" wheels
both driven, soft stop and delay on reverse, maximum run timer,
extra relay to read gate position, external interlock connection
terminals, delay timer allows external locks to disengage
before gate moves, gray powder coat finish over full zinc
plating standard, brake valves |
green powder paint
flame spray galvanized |
222 CX ST |
2Hp motor, for gates
up to 4000lbs, 2 feet / sec speed, 8" wheels both driven,
soft stop and delay on reverse, maximum run timer, extra relay
to read gate position, external interlock connection terminals,
delay timer allows external locks to disengage before gate
moves, gray powder coat finish over full zinc plating standard,
brake valves |
green powder paint
flame spray galvanized |
|
222 SERIES FACTORY INSTALLED ACCESSORIES |
| Model |
Description |
AEIDE A24FREE |
detector, prewired (free
exit) includes 11 pin base |
AEIDE
A24SFTY |
detector,
prewired (obstruction) includes 11 pin base |
AEIHE 120 T |
heater with thermostat 120VAC |
AEIHE
240 T |
heater
with thermostat 240VAC |
AEIHE 480
T |
heater with thermostat 480VAC |
AEIDE
A24ARMG |
detector,
prewired (misc, use, output not connected) includes 11 pin
base |
AMISL 0LS |
drive wheel release indicator
switch |
AMILR
001 |
key operated
cable release mechanism, operator mounted |
AMILR 001 R |
air operated remote release
mechanism (includes enclosure and 50ft air tubing) |
AMISB
001 |
weather
stripping brushes |
AMISL 120 |
internal, solenoid operator
dead bolt (120VAC) |
AMISL
208 |
internal,
solenoid operator dead bolt (208VAC) |
AMISL 240 |
internal, solenoid operator
dead bolt (240VAC) |
|
| |
|
|
