SW425 Swing Gate Operator (light duty)
DC-powered residential swing gate operator
This stylish DC operator with exceptional starting torque features soft start/soft stop operation. This promotes longer gate and operator life, as well as dependable performance. The SW425 is capable of operating gates up to 13 ft. long and weighting up to 300 pounds.
2-Year Warranty
Includes a Liftmaster 412HM Receiver
Safety, Convenience, Flexibility
"Full systems" circuit standard
- Built-in fully adjustable timer to close
- Adjustable gate sensitivity features
- Fully adjustable inherent obstruction detection system
- LED diagnostics to speed installation
- Easy to use inputs for loops, sensing devices and control devices
- Supports the optional emergency power backup system
Specifications
Operator speed - 10 inches per second
Power requirement - Dedicated 115-volt AC (+/- 10V)
Overall dimensions - 16-1/2" H x 13-1/2" L x 14-1/2" W
Operator weight - 83 pounds
Accessory power - One 12VDC
ETL listed - UL325 Class I, II, III, IV

Construction:
Motor: 12VDC continuous-duty motor with thermal overload protection
Metal frame: 3/16 inch steel frame
Optional equipment:
- extended auto close timer
- audible warning system
- battery-run system
- heater with thermostat
- solar kit
- concrete mounting stand
Recommended Capacities
Max gate weight Max gate width Cycles per hour
300 lbs. 13 ft. continuous duty

Standard Features
DC operator system
Powered by a 12VDC motor, this system provides exceptional starting torque.
Slow start/stop
Reduces the stress and shock to a gate system during starting and stopping. This promotes longer gate and operator life.
Electronic braking
The electronic brake system adds substantial gate position control. Especially important on high-cycles gates, this ensures consistent gate stops without coasting.
Inherent obstruction sensing
Internal system provides separate force adjustments for the open and close directions. This allows the operator to be individually tailored for the specific gate installation and conditions.
External obstruction sensing
Input connections are provided for external contact and non-contact sensors, such as photo-eyes and edge devices.
Control inputs
Control inputs allows the connection of a full range of optional external devices like loop detectors, telephone entry systems, access control systems and radio receivers.
Single/dual gate operation
Allows operation of 2 separate gate operators in unison at a single entrance. Assures consistent, simultaneous open/close cycle for both operators. Timer to close
Adjustable timer can be set from 0 to 45 seconds. The unit will automatically reset upon receiving and additional open commands.
Maximum run timer
Protects against damage to the gate and operator by limiting the unit's maximum run time to 300 seconds.
LED indicators
Operator input, status and diagnostic LEDs simplify setup and troubleshooting.
Limit switches
All driven limit switches and limit nuts are fully adjustable, adding considerable convenience to unit installation and maintenance.
External manual disconnect
External system allows the user to manually operate the gate easily and efficiently during a power outage.
Post mount
Standard post-mount installation. Posts included.

Optional equipment
Battery-run system*
Provides complete operation of the gate operator, including all DC control devices and sensing devices.
Solar panel system*
Provides complete operation of the gate operator through the use of combined solar panel and battery system.
* Indicates option needed when ordering operator.