SW470 Swing Gate Operator (medium duty)
Medium-duty commercial swing gate operator
Supporting gate lengths up to 12 feet, gate weights up to
500 pounds and utilizing a weather-resistant powder coated
steel enclosure ensures rugged and reliable performance.
This model is ideal for commercial applications and is fully
UL325-compliant.
2-Year Warranty
Gate logic board provides many enhanced and exclusive features
- Fully Adjustable Inherent Obstruction Detection System
- Advanced Dual Gate Operation
- Sequenced Access Management (SAM) System
- Shadow Loop Input
- Industrial Surge and Spike Protection
- Digital Logic Control Allowing for Long Control Lines of
Over 1,000 Feet
- Separate Open and Close External Sensor Inputs
- 17 LEDs to Ease Installation and Speed Diagnostics
Specifications
Operator speed - 90 degree swing in 12 seconds
Power - 115/230 VAC, Single phase - 60 Hz
Operator weight - 110 pounds
Accessory power - One 24 VAC
UL listed - UL991, UL325 Class I, II, III, IV
Construction:
Gear reduction: 30:1 wormgear in oil
Motor: 1/2 high-starting torque motor
Metal frame: Pre-galvanized steel
Enclosure: Weather resistant 14-gauge pre-galvanized steel
Optional equipment:
- Self-Regulating Heater
Recommended Capacities
HP Max gate weight Max gate width Cycles per hour
1/2 500 lbs. 12 ft. 10
Standard Features
inherent obstruction sensing
This unit's internal obstruction sensing system offers a
single force adjustment for both the open and closed directions.
If the gate strikes an obstruction, a closing gate will
reverse to open and an opening gate will reverse to close.
external obstruction sensing
Input connections are provided for external contact and
non-contact sensors, such as photo eyes and edge devices.
advanced dual gate operation
This convenient 2-wire system allows the operation of 2
separate gate operators in unison at a single entrance.
This advanced system provides the added convenience of connecting
accessories to either operator.
sequenced access management
The sequenced access management (SAM) system provides the
capability to sequentially control the operator in tandem
with a barrier gate.
digital logic control
Supports long-distance control wiring runs of over 1,000
feet, providing you greater flexibility of gate operator
site placement.
LED indicators
Operator input, status and diagnostic LEDs simplify setup
and troubleshooting.
warning device
UL325-compliant entrapment warning alarm has the ability
to be set for pre-operation warning. This will provide a
3-second warning prior to and during gate movement.
loop detector inputs
A full range of inputs are available to support exit, shadow
and interrupt loop detectors.
timer to close
Adjustable timer can be set from 1 to 180 seconds. The unit
will automatically reset upon receiving any additional open
commands.
maximum run timer
Protects against damage to the gate and operator by limiting
the unit's run time to 120 seconds.
emergency stop button
This one-button station will halt movement of the operator
in an emergency situation and comes standard in an outdoor
weather- tight enclosure.
maglock control
A dedicated control relay is provided to activate and deactivate
an optional magnetic lock for securing the gate.
gear drive reduction
The wormgear 30-to-1 reduction unit is saturated in an oil
bath for strong fluid motion of the operator.
control inputs
Control inputs allow the connection of a full range of optional
external devices like loop detectors, telephone entry systems,
access control systems and radio receivers.
limit settings
All driven limit cams are fully adjustable, adding considerable
convenience to unit installation and maintenance.
surge & spike protection
Specially designed circuitry provides excellent protection
from external spikes or surges.
manual disconnect
Ensures that manual operation is possible during emergencies
and maintenance work.
removable access control panel
A removable access door is incorporated into the design
to provide easy access to the electronics when programming
and for maintenance
