| |
|
SW490 Swing Gate Operator (heavy duty)
High-cycle, industrial duty swing gate opener
This hefty design supports gate lengths up to 22 feet and gate
weights up to 1,000 pounds. Utilizing a weather-resistant powder
coated steel enclosure, a wormgear reduction drive and high-starting
torque motor offers you years of reliable and powerful performance.
This model is ideal for demanding industrial applications and
is fully UL325-compliant.
2-Year Warranty
Gate logic board provides many enhanced and exclusive features
- Fully Adjustable Inherent Obstruction Detection System
- Advanced Dual Gate Operation
- Sequenced Access Management (SAM) System
- Shadow Loop Input
- Industrial Surge and Spike Protection
- Digital Logic Control Allowing for Long Control Lines of Over
1,000 Feet
- Separate Open and Close External Sensor Inputs
- 17 LEDs to Ease Installation and Speed Diagnostics
Specifications
Operator speed - 90 degree swing in 12 seconds
Power
115/208/230 VAC, Single phase - 60 Hz
208/230/460/575, Three phase - 60 Hz
Overall dimensions - 18.5" H x 26.25" L x 18.5"
W
Operator weight - 200 pounds
Accessory power - One 24 VAC
UL listed - UL991, UL325 Class I, II, III, IV
Construction:
Gear reduction: 30:1 wormgear in oil
Motor: 1/2 to 1 HP high-starting torque motor
Metal frame: Pre-galvanized steel
Enclosure: Weather resistant 14-gauge pre-galvanized
steel
Optional equipment:
- self-regulating heaters
- quick-release manual
- disconnect system
Recommended Capacities
HP Max gate weight Max gate width Cycles per hour
1/3 600 lbs. 12 ft. 20
1/2 750 lbs. 16 ft. 20
3/4 900 lbs. 19 ft. 20
1 1000 lbs. 22 ft. 20
Standard Features
Inherent obstruction sensing
This unit's internal obstruction sensing system offers a single
force adjustment for both the open and closed directions.
If the gate strikes an obstruction, a closing gate will reverse
to open and an opening gate will reverse to close.
External obstruction sensing
Input connections are provided for external contact and non-contact
sensors, such as photo eyes and edge devices.
Advanced dual gate operation
This convenient 2-wire system allows the operation of 2 separate
gate operators in unison at a single entrance. This advanced
system provides the added convenience of
connecting accessories to either operator.
Sequenced access management
The Sequenced Access Management (SAM) system provides the
capability to sequentially control the operator in tandem
with a barrier gate.
Digital logic control
Supports long-distance control wiring runs of over 1,000 feet,
providing you greater flexibility of gate operator site placement.
LED indicators
Operator input, status and diagnostic LEDs simplify setup
and troubleshooting.
Warning device
UL325-compliant entrapment warning alarm has the ability to
be set for pre-operation warning. This will provide a 3-second
warning prior to and during gate movement.
Loop detector inputs
A full range of inputs are available to support exit, shadow
and interrupt loop detectors.
Timer to close
Adjustable timer can be set from 1 to 180 seconds. The unit
will automatically reset upon receiving any additional open
commands.
Maximum run timer
Protects against damage to the gate and operator by limiting
the unit's run time to 120 seconds.
Emergency stop button
This 1-button station will halt movement of the operator in
an emergency situation and comes standard in an outdoor weather
- tight enclosure.
Maglock control
A dedicated control relay is provided to activate and deactivate
an optional magnetic lock for securing the gate.
Gear drive reduction
The wormgear 30-to-1 reduction unit is saturated in an oil
bath for strong fluid motion of the operator.
Control inputs
Control inputs allow the connection of a full range of optional
external devices like loop detectors, telephone entry systems,
access control systems and radio receivers.
Limit settings
All driven limit cams are fully adjustable, adding considerable
convenience to unit installation and maintenance.
Surge & spike protection
Specially designed circuitry provides excellent protection
from external spikes or surges.
Manual disconnect
Ensures that manual operation is possible during emergencies
and maintenance work.
Removable access control panel
A removable access door is incorporated into the design to
provide easy access to the electronics when programming and
for ma
|
