| Linear MultiCode
Radio Controls The Multi-Code brand is preferred among so many installers of gate operators and systems, garage door operators, and commercial access control systems. • Multi Door Controllers • Single Door Controllers • Telephone Entry with Access Ctrl. • Accessories • Telephone Entry • Transmitters • Residential Telephone Entry • MultiCode Transmitters • MultiCode Keypads • MultiCode Receivers • MegaCode Transmitters • MegaCode Keypads • MegaCode Receivers • Delta3 Transmitters • Delta3 Keypads • Delta3 Receivers • Linear Building and Gated Community Access Controls • Linear Radio Controls • |
  |
||
 |
|||
Receivers |
|||
 |
1-channel Receiver Model Number: 109020 •Exclusive two-way lugs fit under terminal screws or accept push-on terminals in remote sites •11-inch wire antenna supplied •Three tabs for universal operator mounting •Power: for connection to any three-terminal 24 V operator (for higher voltages, consult factory); no need for separate transformer or adapter •Frequency: 300 MHz (310 MHz also available) •Codes: 1,024 (set by dip switches) •Dimensions: 3 x 5.5 x 1.5 inches Manual |
||
|
|||
 |
1-channel Receiver Model Number: 309013 •Exclusive two-way lugs that fit right under terminal screws or accept push-on terminals in remote sites •11-inch wire antenna supplied •Three tabs for universal operator mounting •Power: for connection to any three-terminal 24 V operator (for higher voltages, consult factory); no need for transformer or adapter •Frequency: 310 MHz •Codes: 1,024 (set by dip switches) •Dimensions: 3 x 5.5 x 1.5 inches Manual |
||
|
|||
 |
1-channel Receiver Model Number: 109950 (Replaces 109930, 109931, 109940) •Dual frequency - Multi-Code or Stanley compatible; jumper selectable •12-24 Volts AC or DC •Auto voltage - no jumpers to set •Single relay •Supplied with whip antenna, three feet of coaxial cable and bulkhead connector •Power: 12-30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered •Frequency: 300 MHz and 310 MHz • Dimensions: 3.625 x 5.25 x 1.5 inches Manual |
||
|
|||
 |
1-channel Receiver Model Number: 109920 •For use inside metal enclosures and in other applications requiring stronger signal reception •Antenna with coaxial connector supplied •1 amp output @ 30 Vac maximum on relay contacts •115 Vac, transformer input (included) •Frequency: 300 MHz •Codes: 1,024 (set by dip switches) •Dimensions: 5.25 x 3.625 x 1.5 inches Manual |
||
|
|
|||
 |
2-channel 12-24V Gate Receiver Model Number: 302850 • Dual frequency - Multi-Code or Stanley compatible; jumper selectable • 12-24 Volts AC or DC • Auto voltage sensing - no jumpers to set • Two relay • Supplied with whip antenna, three feet of coaxial cable and bulkhead connector • Power: 12 - 30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered • Frequency: 300 MHz and 310 MHz • Dimensions: 3.625 x 5.25 x 1.5 inches Manual |
||
|
|||
 |
2-channel Heavy Duty Gate Receiver Model Number: 302101 • For any application requiring two channels in one location - 512 codes each channel • Up-down, open-emergency-stop, and other functions • For heavy-duty operation • Cabinet meets NEMA 13, JIC specs • Two-channel relay output, N/O, N/C, Common - rated 1 amp @ 30 Vac max • Power: 24 Vac 10% power • Frequency: 300 MHz • Codes: 1,024 total (set by dip switches); 512 codes each of two channels • Dimensions: 6 x 8 x 4 inches Manual |
||
