| Linear
Single Door Controllers Linear's single door controller entry systems are an excellent way to control access at a single entry point. • Linear Multi Door Controllers • Linear Single Door Controllers • Linear Telephone Entry with Access Ctrl. • Linear Accessories • Telephone Entry • Transmitters • Residential Telephone Entry • MultiCode Transmitters • MultiCode Keypads • MultiCode Receivers • MegaCode Transmitters • MegaCode Keypads • MegaCode Receivers • Delta3 Transmitters • Delta3 Keypads • Delta3 Receivers • Linear Access Controls • Linear Radio Controls • |
|
||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||
Linear AK-1 Exterior Digital Keypad The Linear Model AK-1 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The Linear keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. • Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities • Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal • Four independent outputs and timers: two form C relays and two solid-state open collector outputs • Up to 480 programmable input codes of one to six digits each for activating either or both relays • Two LED indicators show system status • Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout • Down light illuminates whenever keypad is used • Tactile and audible feedback • Keylock secures keypad to mounting backplate • 4" W x 5.5" H x 3" D |
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
| AK-2 Interior Digital Keypad The Model AK-2 Interior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. The Model AK-2 is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white, ivory & bronze bezels are packaged separately. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. The anti-passback feature prevents using the same code again before the programmed time elapses. All system indicators and lights are long-lasting, solid-state LEDs. Two indicators show the status of the entry system. The left indicator lights red to indicate power, then turns green when access is granted. The right indicator lights yellow when the keypad is in lockout condition (from too many incorrect code entries). The keypad’s courtesy light dimly illuminates the keys at all times. The courtesy light brightly illuminates the keys for two minutes after any key is pressed. An internal sounder beeps when each key is pressed. An internal jumper sets the sounder volume high or low. * Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities* Mounts in a single gang electrical box using security screws; tool included * Four independent outputs and timers: two form C relays and two solid-state open collector outputs * Up to 480 programmable input codes of one to six digits each for activating either or both relays * Two LED indicators show system status * Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout * Rugged metal keys * Built-in LED downlights * Tactile and audible feedback * Includes 4 interchangeable decorative bezels * 3" W x 5" H x 3" D |
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
| AK-2W Weather-Resistant Digital Keypad The Model AK-2W Weather-resistant Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. The Model AK-2W is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white, ivory & bronze bezels are packaged separately. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. The anti-passback feature prevents using the same code again before the programmed time elapses. All system indicators and lights are long-lasting, solid-state LEDs. Two indicators show the status of the entry system. The left indicator lights red to indicate power, then turns green when access is granted. The right indicator lights yellow when the keypad is in lockout condition (from too many incorrect code entries). The keypad’s courtesy light dimly illuminates the keys at all times. The courtesy light brightly illuminates the keys for two minutes after any key is pressed. An internal sounder beeps when each key is pressed. An internal jumper sets the sounder volume high or low. * Designed for outdoor applications* Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities * Mounts in a single gang electrical box using security screws; tool included * Four independent outputs and timers: two form C relays and two solid-state open collector outputs * Up to 480 programmable input codes of one to six digits each for activating either or both relays * Two LED indicators show system status * Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout * Rugged metal keys * Built-in LED downlights * Tactile and audible feedback * Includes 4 interchangeable decorative bezels * 3" W x 5" H x 3" D |
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
| AK-3 Low-Cost Interior Digital Keypad The Model AK-3 Low-cost Interior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. The anti-passback feature prevents using the same code again before the programmed time elapses.Two indicators show the status of the entry system. The left indicator lights red to indicate power, then turns green when access is granted. The right indicator lights yellow when the keypad is in lockout condition (from too many incorrect code entries). An internal sounder beeps when each key is pressed. An internal jumper sets the sounder volume high or low. * Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities* Mounts in a single gang electrical box * Four independent outputs and timers: two form C relays and two solid-state open collector outputs * Up to 480 programmable input codes of one to six digits each for activating either or both relays * Two LED indicators show system status * Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout * Rugged metal keys * Tactile and audible feedback * 3" W x 5" H x 3" D |
|||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
|
* Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities * Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal * Built-in radio receiver * Four independent outputs and timers: two form C relays and two solid-state open collector outputs * Accepts 480 entry codes, 480 block code transmitters, plus one fully supervised Model MGT safety edge transmitter * Two LED indicators show system status * Key operating features include: door sense input; inhibit input; request-to-exit input; alarm shunt output; timed anti-passback; and keypad lockout * Down light illuminates whenever keypad is used * Tactile and audible feedback * Keylock secures keypad to mounting backplate * RF frequency: 318 MHz * 4" W x 7" H x 3" D |
AKR-1 Exterior Digital Keypad with Radio Receiver The Model AKR-1 Exterior Digital Keypad with Radio Receiver is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Up to four sets of block coded MegaCode®
transmitters (up to 480 transmitters total) can be used to gain
access through the AKR-1’s built-in radio receiver. Each transmitter
can be individually suspended or re-activated. Four facility codes
can be programmed to identify each block of transmitters. A Radio
Test Mode is provided for testing transmitters and detecting radio
interference. Programming of individual (non-block coded) transmitters
is not supported by the AKR-1. Linear’s Model MGT safety edge
transmitter is compatible with the AKR-1. This supervised transmitter
is used to detect and transmit obstacle events to the AKR-1 receiver.
Obstacle signals from an MGT transmitter will activate Relay #2.
These models are COMPATIBLE with product number: ACP00747
|
||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
WOR Wiegand Output Receiver The Model WOR Wiegand Output Receiver is designed for use as an access control interface for Linear's block coded digital transmitters. The unit receives signals from transmitters, adds a facility code to the data, and sends the information to the Wiegand input of the access control panel via a 5-wire connection.Several transmitter and receiver options can be set using the unit's dipswitches. Three different Wiegand output formats (26, 30, & 31-bit) are supported. Three receiver options (lockout, hold, & button offset) can be set. Transmitter buttons on multi-button units can be selectively disabled. The facility code is set using 16 dipswitches. Three antenna types can be used with this receiver. The local whip antenna (supplied) screws directly on to the receiver. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas attach to the receiver's antenna input via RG-59 cable and a type F connector. An on-board RADIO RANGE knob allows adjustment of
the receiver's gain. It can be set to limit the maximum radio range
that the receiver can achieve. Two indicators display the receivers
performance and operation. The red RADIO indicator lights when the
receiver detects a radio signal. The two color red/green STATUS
indicator lights green when the receiver is sending Wiegand data
and during the 1-second post receiver lockout timer (if receiver
lockout is enabled). The indicator turns red when the receiver's
HOLD input (connected to the access control panel) is active. Receiver
test points are provided for listening to the incoming signals with
an audio amplifier.The receiver is housed in a weather-resistant
enclosure and can be mounted indoors or outdoors. Gaskets and a
weather-tight wiring strain relief seal the unit from the elements.
|
||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
These parts are ACCESSORIES for product number: ACP0089
|
AP-4 Single Entrance Access Control System The Model AP-4 Single Entrance Access Control System is designed for a broad range of access control applications. Its wireless design and small size make it easily adaptable for a variety of access control requirements. Typically, the AP-4 is used to control a door strike, barrier gate, automatic gate or automatic door operator. The AP-4 contains a high-gain UHF receiver which uses an external antenna to pick up signals from up to 250 feet away. Up to 480 Linear MegaCode® transmitters and one Model MGT safety edge transmitter can be programmed into the AP-4’s memory. The AP-4 will retain its memory, even without power. Two dry contact relay outputs are provided. One relay is the ACCESS RELAY (K1), which triggers for two seconds each time a programmed transmitter is activated. This relay output connects to the pushbutton or radio input of the access device. The second relay is the OBSTACLE RELAY (K2), which triggers for two seconds when an obstacle signal is sent from a Model MGT safety edge transmitter. This relay output connects to the obstacle input of the access device. An OPEN REQUEST input terminal is supplied for hardwired activation of the access device with an external pushbutton or keyswitch. The AP-4 can be powered from 12-24 Volts AC or DC. The Form C relay outputs can switch up to 1 Amp each. An EARTH GROUND terminal is provided as an optional connection for maximum lightning and static protection. * Ideal for gated communities, parking facilities, and industrial sites * Easy to set-up and use, up to 480 remotes can be programmed with a few keystrokes * Easy to add, suspend, and delete transmitters through programming mode, no transmitter dip switches to set * Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes * Supports one fully supervised safety edge transmitter * RF frequency: 318 MHz * 4.45" W x 5.75" H x 1.5" D (without antenna) |
||||||||||||||||||||||||||||||||||||||||
