•
More Information •
•
Manual •
Width: 15"
Height: 40 1/2"
Depth: 15 1/2"
Weight: 200 lbs
Anti-Entrapment/Detection
Devices:
Operator is pre-wired to accept contact and non-contact
detection devices such as reverse edges and/or photo electric eyes
Warning Signals:
Pre-start audio/visual outputs provided
Options:
BGU
230V, single-phase operation
Stainless steel cabinet for installations in areas where
high concentration of corrosive materials is present
Thermostatically-controlled
strip heater
Arm light kit
BGU-D
Stainless steel cabinet for installations in areas where high concentration
corrosive material is present
Arm light kit
*Optional solar panels
Mechanical:
Dual V-Belt
Heavy-duty right-angle oil bath gear reduction
Heavy-duty harmonic link with oil impregnated bronze bushings
Gate arm clamp with cutting bracket
|
OSCO Models BGU and BGU-D barrier Gate Operators
Models BGU and BGU-D barrier gates can be used for parking applications
and revenue control.
Through switch selections, the gate operator is universal and suitable
for all installation and operational functions. Switch selection
allows for full flexibility as to how and when the arm comes down
in traffic control situations.
The added advantage to the DC operator is the automatic-open feature
upon power loss. When the gate operator senses AC power is no longer
present, the arm will cycle open, remaining open until AC power
is restored (fail safe) OR continues normal operation while monitoring
the battery level. Once the batteries are low the unit will cycle
open until AC power is restored or the batteries receive a full
charge (fail secure).
Cabinet:
Weather-resistant galvannealed steel cabinet with powder
coat finish
Electrical:
BGU
1/3 hp, 115 VAC, single-phase, thermally-protected open-frame, resilient-mounted
PSC motor
Power on/off switch
Duplex receptacle (115 VAC units only)
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable cam-operated limit switches
Motor has manually-resettable overload
Full system capable for access control and reversing devices
BGU-D
24 VDC permanent magnet motor
115 VAC supply converted to 24 VDC for motor and controls
Power on/off switch
Three-button control station included
Accessory connections are 24 VDC
Easily adjustable cam-operated limit switches
Full system capable for access controls and reversing devices
BGU-D Battery Back-up:
Dual batteries charged by 115 VAC or optional solar panels
Charging circuit monitors and maintains battery levels, monitors
AC availability, automatically switches to batteries when AC is
removed, and automatically resumes AC operation
Control circuit options in absence of AC power
Option 1: Fail safe (opens the gate and shuts down until AC power
is restored)
Option 2: Fail secure (continues to cycle gate in normal operation
until batteries run down and then cycles open. Resumes cycling when
existing batteries are charged or when fresh batteries are installed)
Control Circuit:
Solid state circuit board, 24-volt AC or DC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built-in maximum run timer and auto close timer
Master/Slave - simple three-wire connection
Gate Arm:
10', 12' or 14'
Constructed of 1"x4" soft wood, painted white with yellow
and black warning tape and labels on each side.
|
|
