•
More Information •
•
Manual •
Width: 15"
Height: 40 1/2"
Depth: 15 1/2"
Weight: 200 lbs.
Anti-Entrapment/Detection
Devices:
Operator is pre-wired to accept contact and non-contact
detection devices such as reverse edges and/or photo electric eyes
Warning Signals:
Pre-start audio/visual outputs provided
Options:
230V, single-phase operation
Powdercoated stainless steel cabinet for installations in areas
where high concentration of corrosive material is present
Thermostatically-controlled strip heater
Arm signal light kit
Mechanical:
Dual V-belt drives
Heavy-duty 75:1 right-angle oil bath gear reduction
Heavy-duty harmonic link with oil impregnated bronze bushings
|
Model SG Security Gate with Wishbone Arm
The Model SG barrier gate is designed to control industrial vehicular
traffic. The gate can be actuated by different devices, such as
radio controls, single- and three-button control stations, digital
keypads, coded cards, sensing loops and telephone entry systems.
The Model SG barrier gate can be used for large industrial vehicular
traffic. For high-use applications on wide driveways, it is recommended
to use two model BGU 12, one on each side of the driveway. The Model
SG barrier gate control system is designed to accept most available
entrapment devices and has function switches that will allow for
various methods of control
Cabinet:
Weather-resistant
galvannealed steel cabinet with powder coat finish
Lockable and
removable front access panel for easy access
Electrical:
1/2 hp, 115 VAC, single-phase, thermally-protected, open-frame,
resilient-mount PSC motor
Power on/off switch
Duplex receptacle (115 VAC units only)
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable cam-operated limit switches
Full system connections for access controls and reversing devices
Control Circuit:
Solid state circuit board, 24-volt AC or DC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built-in maximum run timer and auto close timer
Master/Slave - simple three-wire connection
Gate Arm:
Heavy-duty wishbone style
Available in lengths from 16 to 25 feet
Constructed of 1x6" soft wood, painted white with yellow and
black warning tape and warning labels on each side
Includes appropriate counterweight system
|
|
