| |
SECO-LARM |
SECO-LARM, manufacturer of the ENFORCER, is a
full-line manufacturer and distributor of reliable commercial,
residential, vehicle, and video security products and accessories
for the world since 1971. SECO-LARM offers an impressive line
of over 400 security products ranging from simple switches to
some of the most sophisticated alarm devices
•
Seco-Larm
Home • Seco-Larm
Maglocks • Seco-Larm
Sirens • Seco-Larm
CCTV Cameras •
• Seco-Larm
Photobeams • |
 |
 |
| |
|
E-941DA-1K2P Double Door Maglock
Descriptions
E-941SA-1K2PD: 1200lb. (545kgs) holding force.
E-941DA-1K2P: 1200lb. (545kgs) per door holding force.
Anodized aluminum housing.
Dual voltage: 12 or 24 VDC (selectable).
No residual magnetism.
Detachable faceplate.
Adjustable mounting bracket.
Built-in status sensor relay output.
Built-in 2-color status LED.
Built-in relock delay timer (1-78 secs.)*
MOV surge protection.
Complete mounting hardware included.
Angle brackets and "Z" brackets available for easy
mounting. |
|
| |
 |
E-941SA-1200 Maglock
Holding force:
E-941SA-600: 600lb. (272kgs),
E-941SA-1200: 1200lb. (545kgs)
Anodized aluminum housing.
Dual voltage: 12 or 24 VDC (selectable).
No residual magnetism.
Detachable faceplate.
Adjustable mounting bracket.
MOV surge protection.
Complete mounting hardware included.
Angle brackets, "Z" brackets, and glass door brackets
available for easy mounting. (Note: Not all brackets are available
for every model. Please see brackets page for details.)
UL and ULC listed.
CE listed. |
|
| |
 |
E-941SA-1K2PD Maglock
E-941SA-1K2PD: 1200lb. (545kgs) holding
force.
E-941DA-1K2P: 1200lb. (545kgs) per door holding force.
Anodized aluminum housing.
Dual voltage: 12 or 24 VDC (selectable).
No residual magnetism.
Detachable faceplate.
Adjustable mounting bracket.
Built-in status sensor relay output.
Built-in 2-color status LED.
Built-in relock delay timer (1-78 secs.)*
MOV surge protection.
Complete mounting hardware included.
Angle brackets and "Z" brackets available for easy
mounting |
|
| |
 |
E-941SA-600
Maglock
Holding force:
E-941SA-600: 600lb. (272kgs),
E-941SA-1200: 1200lb. (545kgs)
Anodized aluminum housing.
Dual voltage: 12 or 24 VDC (selectable).
No residual magnetism.
Detachable faceplate.
Adjustable mounting bracket.
MOV surge protection.
Complete mounting hardware included.
Angle brackets, "Z" brackets, and glass door brackets
available for easy mounting. (Note: Not all brackets are available
for every model. Please see brackets page for details.)
UL and ULC listed.
CE listed. |
|
| |
 |
E-942FC-1300
Gatelock
Ideal for indoor and outdoor applications,
even in severe weather.
For slide or swinging gate.
Holding force 1, 300lb. (591kgs).
Water-resistant and vandal-resistant attractive stainless-steel
finish.
Maintenance-free, factory-sealed design.
Fail-safe operation (unlocks door when power is removed).
Dual-threaded conduit fitting - 3/4" outside diameter,
1/2" inside diameter.
6-1/2' hookup cord.
No residual magnetism.
Magnet size 8" x 2-1/2" x 1-1/2" (202 x 63 x
38 mm).
Armature size 7-1/4" x 2-3/8" x 5/8" (185 x 61
x 16 mm).
Complete mounting hardware included.
"L" and "Z" brackets available (see below).
Input voltage 12VDC or 24VDC.
Current draw 500mA @ 12VDC, 250mA @ 24VDC.
UL and ULC listed. |
|
| |
 |
E-941SA-300
Miniature Maglock
Perfect for cabinets or small enclosures
Holding force: 300lb. (136kgs)
Anodized aluminum housing
No residual magnetism
Detachable mounting bracket for easy installation
MOV surge protection
Complete mounting hardware included
36-inch hookup wire included |
