 
| |
Secura
Key Stand Alone Access Controls |
| |
Secura Key
Secura Key has been in the business of manufacturing access
control and RFID products for over 30 years. We have a complete
line of access control products ranging from single door, highly
intelligent stand alone systems, to complete multi-door, online
PC based systems. Reader technologies include slot-less TOUCHCARD®,
PROXIMITY, and other leading technologies. Secura Key manufactures
a full line of RFID readers and transponders that comply with
most ISO standards including 15693 and 14443.
•
Stand
Alone Products •
Multi
Door Products • Card
Reader Products •
RFID
Products •
Personalized
Card Program • |
 |
| |
RK-65K
RK65KS
Technical
Specifications |
Secura Key Radio Key® RK-65K & RK65KS
Stand Alone Proximity Access Control Unit with Dynascan®
Technology
Radio Key® RK-65K and RK-65KS are fully programmable, stand
alone proximity access control unit that can manage up to 65,000
individual users. Patented Dynascan®* technology assures
maximum performance in almost any environment. Users are issued
proximity cards or key tags which need only be held within 6"
of the unit to be detected. Presenting a valid card or tag activates
the solid-state relay and results in a long green LED and audible
beep. A Remote Open input is provided to allow activation remotely
via pushbutton. Cards and tags are added and deleted easily
with an inexpensive proximity program card deck (RK-PD1) or
a handheld programmer (RK-HHP). These can also be used to set
the latch timer from ¼ second up to 18 hours, or to toggle
(on/off). PC’s and external programmers are unnecessary.
RK-65K and RK-65KS can be used with the SecuRelay™ smart
relay module. SecuRelay™ separates the lock/gate control
relay from the access control unit for added protection. A Wiegand
output is provided allowing the reader unit to be connected
to a multi-door access control or telephone entry system, if
desired. When used as part of a larger system the local card
memory and relay may be used for degraded mode or other special
functions.The RK-65K is small enough to be mounted on most door
frames and mullions . RK-65KS is the size of a light switch
plate. Both are fully potted for extreme weather-resistance.
Installation is extremely easy, requiring only two screws. There
are no external controllers or panels to install.
• Low Priced, Single-Door
Proximity Entry System
•
Up to 65,000 Proximity Tags or Cards
•
Programmed with an Inexpensive Proximity Card Deck or handheld
programmer
• Up to 6"
Read Distance
• Patented
Dynascan® Technology*
•
No Control Panels
• No
PCs or External Programmer Needed
|
|
| |
Technical
Specifications
|
Secura Key Radio Key® 600 (RK600)
Stand
Alone Proximity / Keypad Access Control Unit with Dynascan®
Technology
Radio Key® 600 (RK600)
is a fully-programmable, stand-alone access control system,
that provides proximity or keypad (PIN) entry for up to 600
users.
Radio Key® 600 is a compact,
weather-resistant, surface mounted Access Control Unit, which
has a built-in programmer. Because it has an internal reader,
it can stand alone for most applications.
Secura Key's patented DYNASCAN®* technology assures
maximum performance in any environment.
The optional Auxiliary Reader (RKAR) can be used with Radio
Key® 600 to provide extraordinary protection against weather
and vandalism. Entry cannot be obtained by tampering when
the Auxiliary Reader is mounted outside. For further protection,
both the Access Control Unit and Auxiliary Reader can be mounted
behind glass or other non-metallic wall surfaces. When installed
with the Auxiliary Reader, the Access Control Unit can be
used as an exit reader and as an enrollment reader. Either
unit easily mounts to a single-gang electrical box, masonry
wall, post, or almost any surface -- there are no bulky control
panels to install.
To use Radio Key® 600, simply hold your key tag near the
Access Control Unit or optional Auxiliary Reader (RKAR) or
enter your PIN code into the keypad. Programming is easily
accomplished by using the built-in keypad. Key tags can be
added by holding each key tag near the unit or by using the
keypad, without the tags being present. The keypad is also
used to void tags, set the latch time and to select the active,
inactive or unlocked modes. The optional RKAT Audit Trail
Module allows connection to a PC or serial printer. Software
included provides reports on transaction history, allows programming
of key tags or PINs, user name database and other reader settings.
RK-LINK™ Software also allows RK600 memory to be backed
up and restored.
|
|
| |
|
Secura Key Radio Key® 600e
Stand
Alone Proximity Access Control Unit with Dynascan® Technology
Secura Key Radio Key® 600e (RK600e)
is a fully-programmable, stand-alone access control system,
that provides proximity entry for up to 600 users, using either
a card or key tag.
Secura Key Radio Key® 600e is a compact, weather-resistant,
surface mounted Access Control Unit, which is programmed with
an inexpensive proximity card deck.
•
Low Priced Single-Door Proximity Entry System
•
Void/Valid Capability for up to 600 Proximity Tags or Cards
• Programmed With an
Inexpensive Proximity Card Deck or Handheld Programmer
• Optional Auxiliary Reader
for High-Security/Extreme Weather Conditions
•
High Security - Entry Cannot Be Obtained by Tampering With Auxiliary
Reader
• Up to 6"
Reading Distance
• Connect
a PC or Serial Printer with Optional Audit Trail Module
• Optional Auxiliary Reader
for High-Security/Extreme Weather Conditions
•
Password Protected Programming
•
Patented Dynascan®* Technology
Secura Key’s patented DYNASCAN®* technology assures
maximum performance in any environment.
The optional Auxiliary Reader (RKAR) can be used with Radio
Key® 600e to provide higher security. Entry cannot be obtained
by tampering when the Auxiliary Reader is mounted outside. For
further protection, both the Access Control Unit and Auxiliary
Reader can be mounted behind glass or other non-metallic wall
surfaces. When installed with the Auxiliary Reader, the Access
Control Unit can be used as an exit reader and as an enrollment
reader. Either unit easily mounts to a single-gang electrical
box, masonry wall, post, or almost any surface -- there are
no bulky control panels to install. To use Radio Key®
600e, simply hold your proximity tag near the Access Control
Unit or optional Auxiliary Reader (RKAR). Programming is easily
accomplished by using an inexpensive proximity programming
deck or a handheld programmer. These are also used to void
tags, set the latch time and to select the active, inactive
or unlocked modes. The optional RKAT Audit Trail Module allows
connection to a PC or serial printer. Software included provides
reports on transaction history, allows programming of proximity
tags user name database, and other reader settings. RK-LINKTM
Software also allows RK600e memory to be backed up and restored.
|
|
| |
|
Secura Key RK-HHP
HAND HELD
PROGRAMMER
Secura Key standalone access control products are easy to install,
easy to use and, now, easier than ever to program.
The new RK-HHP fits in the palm of your hand. Just hold it in
front of the access control unit and press the keys. In seconds
you can add users, delete users, set the latch timer or change
the operating mode. You can use your RK-HHP with an unlimited
number of access control units and there are no batteries to
worry about.
The RK-HHP is compatible with the RK-65K, RK-65KS and RK-600e
proximity access control units. |
|
| |
Technical
Specifications
|
Secura Key ENTRACOMP® 26SA
Stand
Alone Card Access Control Unit
The Secura Key ENTRACOMP® 26SA card access control unit
is both inexpensive and fully programmable. The patented slotless
TOUCH CARD® reader is protected from weather and vandalism.
Simply place a card on the stainless steel touch plate and the
card is read instantly and accurately. A remote open input allows
the door or gate to also be controlled from a remote switch.
• 3500 CARD CAPACITY
• WEATHER RESISTANT FOR
OUTDOOR INSTALLATION
•
PATENTED SLOTLESS TOUCH CARD® TECHNOLOGY
•
TIMED ANTIPASSBACK
•
REMOTE OPEN INPUT
• NO
CONTROL PANELS OR SECONDARY ELECTRONICS
•
EXTREMELY EASY TO INSTALL
•
LOW POWER CONSUMPTION
•
NON-VOLATILE MEMORY
•
VERY RELIABLE
Because the ENTRACOMP® 26SA has nonvolatile memory, reprogramming
after a power loss is a thing of the past. Adding and deleting
cards, as well as other programming functions, are easily accomplished
from outside the housing by using programming cards. The reader
operates on low voltage AC or DC and consumes less than 200
milliamps. The 26SA may be used with the new Secura Key SecuRelay™.
SecuRelay™ allows the lock or gate control circuit to
be remotely located for added vandal-resistance. Lexan®
and metal surface housings and a flush-mount housing are available.
|
|
| |
Technical
Specifications
|
Secura Key ENTRACOMP® 28SA Plus
Smart
Access Control Unit
The ENTRACOMP® 28SA Plus is a highly sophisticated, yet
simple to use, card access control unit for single or multi-door
applications. Simply place the card on the stainless steel TOUCH
CARD® Reader plate, and the card is read instantly and accurately.
Patented slotless TOUCH CARD® Reader technology protects
the unit from weather and vandalism.
•
65,500 Card Capacity
•
5,000 Stored Transactions
•
15 Time Zones / 32 Holidays
•
Connect up to 128 Units with Optional SK-NM485 Module and SK-NETTM
Software
• Audit Trail
- Upload to PC or Connect to Serial Printer
•
Modem Capability for Remote Locations
•
TCP/IP Capability for LAN Connection
•
Weather Resistant for Outdoor Installation
•
True IN/OUT or Timed Antipassback
The unit may be programmed with a PC either locally or with
the use of a modem. Basic programming functions can also be
accomplished by using programming cards. Transaction information
is stored by the unit and may be downloaded to a PC or printer.
Up to 128 28SA Plus units can be connected together in a single
twisted pair RS-485 network using optional SK-NM485 Modules
and SK-NETTM Software for Windows® 95/ 98/NT/2000. A remote
reader (SK-029W) may be connected to the ENTRACOMP® 28SA
Plus to allow access control in both directions through a single
passageway, including true IN/OUT anti-passback capability.
Three inputs are provided which are user programmable as Door
Monitor, Tamper Monitor, Remote Inactive, Remote Open, Arming
Circuit, Bell, or User Defined. The limited use feature allows
cards to be programmed to work for a specified number of uses,
days, weeks, or days after the first use. |
|
| |
Technical
Specifications
|
Secura Key SK-NETT
Access Control
Software
SK-NET™ Access Control Software is an easy-to-use Windows®-based
program for managing SK-ACP control panels and 28SA-PLUS access
control units. Up to 200 doors in a location can be networked
using a high-speed RS-485 twisted pair bus. Doors can be controlled
and programmed from a central, non-dedicated computer.
SK-NET™-MLD allows the creation of an unlimited number
of locations and connection via dial-up modem or TCP/IP. Client/Server
licenses are also available that permit software access from
multiple workstations.
•
Control up to 200 Doors on an RS-485, twisted pair cable
• Windows® Compatible
• (98/2000/XP/NT 4.0 or greater)
• Client/Server Licenses
for Multiple Workstations
•
Full Graphical Time Zone Display
•
Transaction, User and Reader Reports with FIltering
•
Real and Timed Antipassback
•
Optional Multi-Location Software with Dial-up Modem and TCP/IP
Capability
SK-NET™ is very intuitive for Windows® users. SK-NET™
Explorer uses a familiar format to configure the access control
system. Windows® conventions such as drag-and-drop and right-click
menus make SK-NET™ easy to learn.Transaction history displays
all card uses with time, date, location and user. The User Manager
screen is used to assign access privileges and to monitor in/out
status. For software developers who wish to write a companion
application, an API license is also available.
|
|
| |
Technical
Specifications
|
Secura Key Radio Key® 100M
Stand
Alone Proximity Access Control Unit
Radio Key® 100M is a fully programmable, stand alone proximity
access control unit that provides entry for up to 100 individual
users. Our patented DYNASCAN®*technology assures maximum
performance in almost any environment. To obtain access simply
hold the proximity tag or card near the Radio Key® 100M.
A short beep on the beeper and a green LED indicate that access
has been granted. Denied access (from an invalid tag) is indicated
by a long beep and a red LED. A Request To Exit input is provided
to allow access remotely via a push button.
•
Low Priced, Single-Door Proximity Entry System
•
Void/Valid Capability for up to 100 Proximity Tags or Cards
• Programmed with an
Inexpensive Proximity Card Deck or Handheld Programmer
• Up to 6" Read Distance
• Easy Installation
•
Dynascan® Technology*
•
No Control Panels
• No
PCs or External Programmers Needed
Programming is easily accomplished by using an inexpensive proximity
programming deck or handheld programmer. Simple instruction
sequences allow the addition and deletion of tags from the unit
memory, as well as setting the length of the open door time
from 1/4 second to 18 hours or to toggle (on/off). PC’s
and external programmers are unnecessary. Radio Key® 100M
can be used with the SecuRelayTM smart relay module. SecuRelayTM
separates the lock/gate control relay from the access control
unit for added protection. A Wiegand output is provided allowing
the RK100M to be connected to a multi-door system, if desired.
Installation of the Radio Key® 100M is extremely easy. Two
screws mount the unit to a mullion, masonry wall, post, or almost
any surface. There are no bulky control panels to install.
|
|
| |
Technical
Specifications |
Secura Key SecuRelayT
Intelligent
Relay Module
•
Added Security For Standalone Access Control Units
•
Remote Relay is Activated by Unique Code from Reader
•
Compatible with Radio Key® RK100M, RK-65K and Entracomp®
26SA
• Easy Installation
The new SecuRelay™ from Secura Key adds a new dimension
of protection to standalone access control units. SecuRelay™
moves the lock control relay to a location away from the reader.
This eliminates the threat of an intruder gaining entry by “hot
wiring” the cable at the reader.
Whenever a valid card is presented to a SecuRelay™
compatible access control unit, a unique data stream is sent
to the SecuRelay™. Each SecuRelay™ learns to recognize
the data from a single access control unit. Tampering with
the wires at the access control unit, even replacing the unit
with another reader, will not trick the SecuRelay™ into
releasing the lock or gate. SecuRelay™ is compatible
with Secura Key Radio Key® RK100M and RK-65K standalone
proximity access control and with the Entracomp® 26SA
(version 4.0 or later firmware). |
|
|
|
|
