| |
Securitron
UNLATCH Electronic Locks |
Unlatch & Mortise Unlatch Electric Door Locks: Securitron’s
patented UnLatch is a completely new type of electric door releasing
device which sweeps away the limitations inherent in traditional
electric strike designs. The UnLatch screws into the existing
doorframe in seconds. There is no need for routing a special
cut-out. This not only saves on installation labor, but maintains
the original strength and integrity of the door frame and yields
a fully concealed installation for maximum esthetic appeal.
The Unlatch is highly universal in that one version will operate
any North American cylindrical type dead latch or spring latch
and installs in wood, steel or aluminum door frames. Unlike
conventional electric strikes, the UnLatch also releases under
pressure and includes a latch status monitoring output as a
standard feature. The UnLatch truly merits being called revolutionary.
Conventional electric strikes include a plate called the keeper
or gate which is electrically released to swing out and thereby
allows the latch to move through the space the keeper has vacated.
This keeper movement is the reason why a special cut needs
to be made in the doorframe. The cut-out provides a space
for the keeper to swing in to. The UnLatch however uses a
motor driven plunger to push the latch back in to the door.
There is no keeper and no reason to route out the doorframe.
For dead latches, a second plunger separately controls the
dead latch pin which is normally maintained in the retracted
state for optimum security. The dead latch plunger then releases
the dead latch pin just before the first plunger pushes in
the spring latch to release the door. When the door is reclosed,
the UnLatch automatically re-secures it including reestablishing
full dead latch security. The UnLatch’s unique and novel
operation yields an unprecedented array of benefits.
|
|
 |
| |
|
Securitron UNLATCH
UNLATCH Electronic Locks
details:
UNLATCH is for any application where an electric strike would
be used for a cylindrical/tubular lockset. A single UNLATCH
model will operate any North American cylindrical type spring
latch and dead latch. There is no need to determine the specific
brand of latching hardware, the UNLATCH accepts all of them.
Similarly, the same UnLatch model can be installed on all
door types: steel, aluminum or wood. Problems of ending up
with the wrong electric strike model for the door or latch
type are eliminated. • Fits standard ANSI 4-7/8”
strike cutout • No cutting on the jamb required. CURRENT
DRAW and VOLTAGE: 12VDC-40mA continuous, minimum 300mA when
operating 24VDC-40mA continuous, minimum 200mA when operating
Higher capacity supply (1-3 Amps) is recommended for startup
inrush to achieve best operation under pre-load. DIMENSIONS:
3 3/8” x 1 3/8” x 1 7/16” [86mm x 35mm x
36mm] PRODUCT FEATURES:
Fits standard ANSI 4-7/8” strike cutout
No cutting on the jamb required
Motorized, no solenoids
Fully concealed installation
Maintains dead-latch function at all times
Releases under pre-load
Latch status sensor is standard
UL Listed
|
| Item # |
Description |
Voltage |
| SEC UNL-12 |
Securitron Electronic Strike for Cylindrical
Locks |
12VDC |
| SEC UNL-24 |
Securitron Electronic Strike for Cylindrical
Locks |
24VDC |
|
|
| |
|
Securitron Mortise UNLATCH
MORTISE UNLATCH Electronic
Locks details:
Mortise UNLATCH is for any application where an electric strike
would be used for a mortise type lock. The MUNL is an electronic
strike that easily screws into the existing door frame. There
is no need for routing a special cut-out. Installation is
fully concealed. The MUNL will operate any North American
mortise lock and installs in wood, steel, or aluminum door
frames and is field adjustable to work with any make or model
of mortise lock. The Mortise UNLATCH releases under pressure
and includes a latch status monitoring output as a standard
feature. CURRENT DRAW and VOLTAGE 12VDC-40mA continuous, minimum
600mA when operating 24VDC-40mA continuous, minimum 300mA
when operating Higher capacity supply (1-4 Amps) is recommended
for startup inrush to achieve best operation under pre-load.
DIMENSIONS: 3 5/8” x 1 7/8” x 1 1/4” [91mm
x 50mm x 32mm]
PRODUCT FEATURES:
Fits standard ANSI 4-7/8” strike cutout
No cutting on the jamb required
Motorized, no solenoids
Fully concealed installation
Maintains dead-latch function at all times
Releases under pre-load
Latch status sensor is standard
One model works with all North American Mortise Locks*
UL Listed
|
| Item # |
Description |
Voltage |
| SEC MUNL-12 |
Securitron Electronic Strike for Mortise
Locks |
12VDC |
| SEC MUNL-24 |
Securitron Electronic Strike for Mortise
Locks |
24VDC |
|
|
| |
|
|
|
