RF Transeiver:
2 CHANNEL MINI 295 MHz AM Transmitter
Innovative design, ergonomic and fine shape; fixed security code encoded in factory 216 code combinations, 28 different facilities numbers.
Range: 60 ÷ 120 yd - Frequency 295 MHz - Modulation AM / ASK.
Power supply : 2 lithium batteries.
Dim. 2,36 x 1,41 x 0,62 in.

The radiocontrol remote is an AM/ASK modulation mini transmitter, operating at 295 MHz, which has been designed for the programmable telephone entry systems, anti-burglar systems and access control systems. The code sent by the transmitter includes 16 a 16 bit security code which allows up to 2 security code combinations and 8 bits of facility code which allows up to 8 2 different locations. The receiver which operates with this transmitter has a Wiegand 26 bit format output, suitable with any type of access control system equipped with this type of protocol. The CR 2016 lithium batteries have a life of about 18 months.

Receiver:
RCS-433R 26 BIT WEIGAND 433MHZ
RECEIVER TYPE: SUPERHETERODYNE
DEMODULATION: AM/ASK
SENSITIVITY: 112DBM
INPUT IMPEDANCE: 50OHM
POWER SUPPLY: 12-24V. AC/DC
CURRENT CONSUMPTION: 24 M.A.
OVERALL DIMENSIONS: 3-3/4" X 1-3/4" X 1"

One button telephone access control for industrial/commercial buildings.
Ten (10) number rollover.
12 volt AC or 12 volt DC powered.
(1) 5 amp form "C" dry contact relays.
Alarm shunt relay.
Supports all Weigand 26 bit protocol.
Full duplex communication.
Up to 12 digit resident telephone numbers.
Rotary or touch-tone compatible.
Programmable site ID.
Remotely programmable from any touch-tone telephone

The Televator II offers a unique microphone control feature. It allows the attendant who answers the emergency call to remotely mute the unit's microphone. This aids communications if there is excessive ambient noise in the elevator cab or area around the Televator. Televator helps achieve compliance with the Americans with Disabilities Act by offering a call progress lamp as standard.The kit comes with the main board in a high impact plastic case, with the speaker, microphone assembly and start switch mounted on 3-foot leads. This allows the kit to be used in any application requiring a custom faceplate or panel.

Emergency assistance telephone for elevators.
Two number rollover
12 volt AC with phone line power back up
Remote microphone muting feature
ADA "Call Progress" lamp
Remotely programmable

Miniguard II Kit
The Miniguard II kit is a hands free, multi-number, telephone entry system for resident / visitor control. Visitors contact the desired tenant by entering the proper code obtained from directory (see accessories). Once called, the resident can grant or deny entry. The Miniguard II kit has a capacity of up to 400 telephone numbers, visitor codes, and personal access codes. It is manufactured for use in and outdoors. The kit comes with the main board in a high impact plastic case, with the speaker, microphone assembly, start switch, and keypad mounted on 3-foot leads. This allows the Miniguard II kit to be used in any application requiring a custom faceplate or panel.

Provides resident controlled guest access for multiple unit housing.
Access control for commercial applications.
Information /assistance telephone at bank ATM kiosks.
12 volt AC or 12 volt DC powered
5 amp form "C" dry contact relays
Alarm shunt relay
ADA compliant keypad
400-unit capacity (24, 50, 125, 200 or 300 also available)
Up to 12 digit resident telephone numbers
Rotary or touch-tone compatible
Programmable site ID
Remotely programmable from any touch-tone telephone
Optional support of various card readers and RFID proximity readers
Optional 7-day clock allows the creation of automatic unlock schedules
Optional printer support allows recording events as they occur

The Super Consolidator Plus
The Super Consolidator Plus is a multifaceted, telephone line concentrator and routing system. It is capable of establishing reliable emergency
telephone connections with fewer "outside" telephone company lines.

Line concentrator supporting multiple emergency or
information telephones on a smaller number of outside lines.
Handles up to 25 emergency phones.
Uses 1 to 5 outside lines
Provides dial tone
Emergency phones can be called individually.
Automatically retrieves site ID code when used with Trigon Decoder.

The Telalarm Intercom
The Telalarm Intercom is a multifaceted, telephone line concentrator and routing system. It is capable of establishing reliable emergency telephone connections with fewer "outside" telephone company lines.

Line concentrator supporting multiple emergency or information telephones
on a smaller number of outside lines.
Handles up to 25 emergency phones.
Uses 1 to 5 outside lines
Provides dial tone
Emergency phones can be called individually.
Automatically retrieves site ID code when used with Trigon Decoder.

The DECODER III
The TRIGON DECODER III is a telephone sized desktop hands-free device that sends and receives telephone tones. It relates incoming tones to information stored in its memory. It then displays that information on a two-line display. Typically, the information is site location data and service/assistance information. The DECODER III provides a means of automatically identifying calls coming into a central location from remote sites. Those remote sites may be emergency telephones, information telephones, and more.

Use in conjunction with autodial telephones capable of sending a DTMF touch-tone Site ID code.
Identify source of incoming calls from emergency telephones in parking structures, banks of elevators, campus walkways, and more.
Identify location of information/assistance telephone caller at ATM's, information telephones, and more.
Serves as a computer input interface for calls received at a monitoring station.
Automatically triggered from incoming calls from the Telalarm Intercom System
Recommended with the 5000/5000D system

Combination Blue light / Strobe
This light is a powerful combination blue light and strobe in one unit. The blue light stays on consistently while the strobe flashes upon trigger.

824 Specifications:
Lamp Type: 4001 Xenon Strobe Lamp

12–28VDC
Hi
2.2 to 2.4A @ 12V tapering to
1.2 to 1.4 A @ 28V

Power Supply Output @120V Input:
17 Joules per Double Flash
25 Joules per Quad Multi Flash

Flash Rate:
68 to 72 Double Flashes per Minute
58 to 62 Quad Multi Flashes per Minute

Intensity:
CLEAR = 1020 Candela
BLUE = 240 Candela

Size and Weight:
6.75" Tall(171mm) x 5.5" Dia.(140mm) x 2.2lbs(1.06kg)

TrigonLinkT software
Trigon's TrigonLink™ software provides a convenient means of remote PC programming of compatible supported Trigon telephone entry systems. TrigonLink™ software allows upload and download capability of site parameters, resident file information, and access log retrieval.

IBM PC compatible
Requires Windows 98 or XP
Written with InstallShield® wizard for installation
Allows fast uploads of "changes only"
Connects via modems
Allows direct connect via RS-232
Allows off-line data entry of resident names and numbers
Allows saving of complete resident file on disk

Large Paper Directory
The Large Backlit Directory can be combined with any of our units. It is used primarily for 125 or greater name capacity.

*This unit is the same dimensions as the Minipak

12.5"high x 9.5" wide x 3"deep
Back-lit standard 8 1/2 x 11 paper face
High impact polycarbonate cover.
Tamper resistant screws.
Surface mount or flush mount.
Flush mount option separate.
12 volt AC powered.
150 numbers at 10-point type.
120 numbers at 12-point type

New Lower Pricing!

Small Paper Directory
The Small Backlit Directory it can be combined with any of our units. It has the same dimensions as the Miniguard, Telalarm and Teledial units which gives them a very finished look .

12" high x 4.2" wide x 2" deep
Back-lit paper face
High impact polycarbonate face cover.
Tamper resistant screws.
Surface mount or flush mount.
Flush mount option separate.
12 volt AC powered.
50 numbers at 10-point type.
40 numbers at 12-point type

New Lower Pricing!

Large Lighted Hood
The Large Lighted Hood is a lighted outdoor mounting shelter for use with the Minipak, Minipak 2000, & Minipak 4000 telephone entry systems. The unit is lighted with three LED lights (May 04). The unit is designed for wall mounting, pole mounting or pedestal mount gooseneck.

#316 Stainless Steel

13" high
10" wide
4" deep

Shown with Minipak

Small Lighted Hood
The Lighted Hood is a lighted outdoor mounting shelter for use with the Miniguard, HF-2 and Teledial telephone entry systems. The unit is lighted with three LED Lamps (effective May 04). The unit is designed for wall mounting, pole mounting or pedestal mount gooseneck.

#316 Stainless Steel

13" high
5" wide
4" deep

Shown with Miniguard IID

Large Flush Mount Backbox
The Large Flush Mount back box is designed to fit the Minipak, Minipak 2000, Minipak 4000 and the Large Backlit Directory. This mounting device allows the standard unit to be flush mounted into a wall. The cutout dimensions for the Large Flush Mount back box are 9-7/8" W x 12-7/8"H x 2-3/4"D.

#316 Stainless Steel
¾ inch brushed stainless trim ring

Part Number: 08B00015

Small Flush Mount Backbox
The Small Flush Mount back box is designed to match "Miniguard" entry units and the Small Backlit Directory in appearance and durability. They allow the standard units to be mounted flush into a wall. In Emergency Telephones, the Small Flush Mount back boxes are sized to fit the Telalarm HF-2, HF-2BB, HF-2TB and the Teledial IIa and IIh. The cutout dimensions for the Small Flush Mount back box are 4¾"W x 12.4"H x 2.55"D.

#316 Stainless Steel
¾ inch brushed stainless trim ring

Part Number: 08B30404