Miniguard HF-2PROX
Hands Free Single Button Telephone Auto Dialer
The Miniguard HF-2PROX is a hands-free single button telephone auto
dialer used as a stand-alone entry host for RFID proximity access
cards, through its 26-bit Weigand protocol interface card. The new
HF-2PROX is finding major applications in industrial /commercial
access control. Primary entry is executed through the RFID proximity
reader that is serviced by the HF-2's microprocessor as a stand-alone
entry host. Backup entry is executed by pressing the single call
button to initiate the autodialing of the primary telephone number.
If the number is busy or does not answer, the HF-2 will hang up
and dial up to nine 'backup' numbers. When the call is answered
and the visitor is identified, the called individual can press "0"
to grant entry or press "9" to activate a camera for visual
identification,
A call progress lamp is provided on the front of the unit for the
benefit of the hearing impaired. When the CALL button is pressed,
the lamp flashes to indicate a call being placed. When the call
is answered, and the unit recognizes that someone is speaking to
the unit, the lamp glows continuously.
One button telephone access control for industrial/commercial
buildings.
Ten (10) number rollover.
Up to 1,000 entry card capacity
Low profile 4.2" door mullion width.
12 volt AC or 12 volt DC powered.
(2) 5 amp form "C" dry contact relays.
Supports all Weigand 26 bit protocol.
Full duplex communication.
12"H x 4¼"W x 2"D.
#316 wraparound stainless steel.
Up to 12 digit telephone numbers.
Rotary or touch-tone compatible.
Programmable site ID.
Remotely programmable from any touch-tone telephone.
Optional B&W or Color Camera Option
Optional Lighted Hood
Optional Small Flush Mount Back-box
|