|
Teleprox Autodial Telephone System
The Teleprox is a hands-free single button telephone auto dialer
used as a stand-alone entry host for RFID proximity access cards,
through its 26-bit Weigand protocol interface card. The new Teleprox
is finding major applications in industrial /commercial access control.
Primary entry is executed through the RFID proximity reader that
is serviced by the Teleprox microprocessor as a stand-alone entry
host. Backup entry is executed by pressing the single call button
to initiate the autodialing of the primary telephone number. If
the number is busy or does not answer, the Teleprox will hang up
and dial up to nine 'backup' numbers. When the call is answered
and the visitor is identified, the called individual can press "0"
to grant entry or press "9" to activate a camera for visual
identification,
One button telephone access control for industrial/commercial
buildings.
Ten (10) number rollover.
Up to 1,000 entry card capacity
Compact design
12 volt AC or 12 volt DC powered.
(2) 5 amp form "C" dry contact relays.
Supports all Weigand 26 bit protocol.
Full duplex communication.
#316 stainless steel.
Up to 12 digit telephone numbers.
Rotary or touch-tone compatible.
Programmable site ID.
Remotely programmable from any touch-tone telephone.
Add Remotes to this unit for easy entry! This allows authorized
people to open the relay/door strike/gate at their convenience
at a further distance than the prox unit.
Receiver Board: MSRP $150
Remotes: MSRP $40 each up to 50. Further discount for larger
numbers
|