Seco Larm SD-7175SGEX1Q - Illuminated Vandal-Resistant Slimline RTE Plate
Item No. SEA SD-7175SGEX1Q
The ENFORCER Multicolor Illuminated Vandal-Resistant Request-to-Exit Plates come with seven field-selectable LED colors, practical for a wide range of indoor/outdoor applications. The ENFORCER Multicolor Illuminated Vandal Resistant Request-To-Exit Plates use a stainless-steel vandal resistant butto
Description
The ENFORCER Multicolor Illuminated Vandal-Resistant Request-to-Exit Plates come with seven field-selectable LED colors, practical for a wide range of indoor/outdoor applications. The ENFORCER Multicolor Illuminated Vandal Resistant Request-To-Exit Plates use a stainless-steel vandal resistant button, illuminated by a circular perimeter LED. The LED color is easily selectable during installation to not only red, green, or blue, but also yellow, cyan, magenta, or white.
Features
Features
- Illuminated vandal-resistant ø1″ (ø25mm) pushbutton
- 12VDC LED – supports 24VDC with included 1kΩ, 1/4W resistor
- Field-selectable LED color: red, green, blue, magenta, yellow, cyan, or white
- NO/NC (DPST) switch
- Switch contact rating: 20A@24VAC / 1A@24VDC
- Switch is weatherproof (IP65) for outdoor use
- “EXIT” and “SALIDA” silk-screened on plate
- Faceplate Brushed stainless, slimline
- Button Vandal resistant with multi-color circular perimeter LED
- LED colors Red, green, blue, magenta, yellow, cyan, or white
- Operating voltage 12/24 VDC
- Contact rating 20A@24VAC / 1A@24VDC
- Electrical configuration DPST
- IP rating Weatherproof IP65
- Operating temperature -13°~131° F (-25°~55° C)
- Dimensions 1-1/2″x4-1/2″x1-3/16″ (38x114x30 mm)
- Weight 2-oz (58g)
Specifications
- Vendor Item No.
- SD-7175SGEX1Q
- Item Category Code
- ACCESS CONTROL
Seco Larm SD-7175SGEX1Q - Illuminated Vandal-Resistant Slimline RTE Plate
Item No. SEA SD-7175SGEX1Q
The ENFORCER Multicolor Illuminated Vandal-Resistant Request-to-Exit Plates come with seven field-selectable LED colors, practical for a wide range of indoor/outdoor applications. The ENFORCER Multicolor Illuminated Vandal Resistant Request-To-Exit Plates use a stainless-steel vandal resistant butto
Description
The ENFORCER Multicolor Illuminated Vandal-Resistant Request-to-Exit Plates come with seven field-selectable LED colors, practical for a wide range of indoor/outdoor applications. The ENFORCER Multicolor Illuminated Vandal Resistant Request-To-Exit Plates use a stainless-steel vandal resistant button, illuminated by a circular perimeter LED. The LED color is easily selectable during installation to not only red, green, or blue, but also yellow, cyan, magenta, or white.
Features
Features
- Illuminated vandal-resistant ø1″ (ø25mm) pushbutton
- 12VDC LED – supports 24VDC with included 1kΩ, 1/4W resistor
- Field-selectable LED color: red, green, blue, magenta, yellow, cyan, or white
- NO/NC (DPST) switch
- Switch contact rating: 20A@24VAC / 1A@24VDC
- Switch is weatherproof (IP65) for outdoor use
- “EXIT” and “SALIDA” silk-screened on plate
- Faceplate Brushed stainless, slimline
- Button Vandal resistant with multi-color circular perimeter LED
- LED colors Red, green, blue, magenta, yellow, cyan, or white
- Operating voltage 12/24 VDC
- Contact rating 20A@24VAC / 1A@24VDC
- Electrical configuration DPST
- IP rating Weatherproof IP65
- Operating temperature -13°~131° F (-25°~55° C)
- Dimensions 1-1/2″x4-1/2″x1-3/16″ (38x114x30 mm)
- Weight 2-oz (58g)
Specifications
- Vendor Item No.
- SD-7175SGEX1Q
- Item Category Code
- ACCESS CONTROL