14"X11"X5" ENCLOSURE
Item No.NBE NP141105
The NP141105 Polycarbonate + ABS NEMA Enclosure is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside. PC+ABS Polycarbonate / ABS Blend for Extreme Durability These enclosures are molded out of UV resistant PC+ABS, a hig
Description
The NP141105 Polycarbonate + ABS NEMA Enclosure is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high-tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Construction and Features
This enclosure is IP55 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. An internal grounding plate is provided as well a wiring clamp to help secure internal wiring.
Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
Accessory Kit
The accessory kit included with the enclosure contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting). Also included is a ground wire, grounding plate and cable clamp which can be mounted to the inside of the enclosure.
Applications:
WiFi Access Points and Routers
SCADA Remote Terminal Unit
Security and Surveillance Systems
Outdoor Use of Indoor Equipment
Protection Against Theft or Damage
Warehouses and Public Areas
Concealment of Equipment
Features:
PC+ABS Polycarbonate / ABS Blend
Gasketed Lid with Tamper-Proof Locking Screw
Dual Door Latches
IP55 Rated
Includes Wall Mount Hardware and Cable Grommets
Optional Pole Mount Kit Available
Material: PC+ABS Polycarbonate / ABS Blend
Color: Gray
Outer Dimensions: 13.4 x 10.4 x 4.7 Inches, (340 x 265 x 120 mm)
Inner Dimensions: 12.6 x 9.6 x 4.6 Inches, (321 x 244 x 114 mm)
Weight: 2.8 lbs. (1.3 kg)
Ratings: NEMA Type 3, 3X / IP55
Flame Rating: Meets UL94-V0
Knockout Sizes (Diameter): (4) 0.62 in. (16 mm), (4) 0.78 in. (20 mm), (4) 1.30 in. (33 mm)
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high-tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Construction and Features
This enclosure is IP55 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. An internal grounding plate is provided as well a wiring clamp to help secure internal wiring.
Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
Accessory Kit
The accessory kit included with the enclosure contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting). Also included is a ground wire, grounding plate and cable clamp which can be mounted to the inside of the enclosure.
Applications:
WiFi Access Points and Routers
SCADA Remote Terminal Unit
Security and Surveillance Systems
Outdoor Use of Indoor Equipment
Protection Against Theft or Damage
Warehouses and Public Areas
Concealment of Equipment
Features:
PC+ABS Polycarbonate / ABS Blend
Gasketed Lid with Tamper-Proof Locking Screw
Dual Door Latches
IP55 Rated
Includes Wall Mount Hardware and Cable Grommets
Optional Pole Mount Kit Available
Material: PC+ABS Polycarbonate / ABS Blend
Color: Gray
Outer Dimensions: 13.4 x 10.4 x 4.7 Inches, (340 x 265 x 120 mm)
Inner Dimensions: 12.6 x 9.6 x 4.6 Inches, (321 x 244 x 114 mm)
Weight: 2.8 lbs. (1.3 kg)
Ratings: NEMA Type 3, 3X / IP55
Flame Rating: Meets UL94-V0
Knockout Sizes (Diameter): (4) 0.62 in. (16 mm), (4) 0.78 in. (20 mm), (4) 1.30 in. (33 mm)
Specifications
- Vendor Item No.
- NP141105
- Vendor No.
- ALTELIX, LLC
14"X11"X5" ENCLOSURE
Item No.NBE NP141105
The NP141105 Polycarbonate + ABS NEMA Enclosure is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside. PC+ABS Polycarbonate / ABS Blend for Extreme Durability These enclosures are molded out of UV resistant PC+ABS, a hig
Description
The NP141105 Polycarbonate + ABS NEMA Enclosure is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high-tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Construction and Features
This enclosure is IP55 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. An internal grounding plate is provided as well a wiring clamp to help secure internal wiring.
Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
Accessory Kit
The accessory kit included with the enclosure contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting). Also included is a ground wire, grounding plate and cable clamp which can be mounted to the inside of the enclosure.
Applications:
WiFi Access Points and Routers
SCADA Remote Terminal Unit
Security and Surveillance Systems
Outdoor Use of Indoor Equipment
Protection Against Theft or Damage
Warehouses and Public Areas
Concealment of Equipment
Features:
PC+ABS Polycarbonate / ABS Blend
Gasketed Lid with Tamper-Proof Locking Screw
Dual Door Latches
IP55 Rated
Includes Wall Mount Hardware and Cable Grommets
Optional Pole Mount Kit Available
Material: PC+ABS Polycarbonate / ABS Blend
Color: Gray
Outer Dimensions: 13.4 x 10.4 x 4.7 Inches, (340 x 265 x 120 mm)
Inner Dimensions: 12.6 x 9.6 x 4.6 Inches, (321 x 244 x 114 mm)
Weight: 2.8 lbs. (1.3 kg)
Ratings: NEMA Type 3, 3X / IP55
Flame Rating: Meets UL94-V0
Knockout Sizes (Diameter): (4) 0.62 in. (16 mm), (4) 0.78 in. (20 mm), (4) 1.30 in. (33 mm)
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high-tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Construction and Features
This enclosure is IP55 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. An internal grounding plate is provided as well a wiring clamp to help secure internal wiring.
Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
Accessory Kit
The accessory kit included with the enclosure contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting). Also included is a ground wire, grounding plate and cable clamp which can be mounted to the inside of the enclosure.
Applications:
WiFi Access Points and Routers
SCADA Remote Terminal Unit
Security and Surveillance Systems
Outdoor Use of Indoor Equipment
Protection Against Theft or Damage
Warehouses and Public Areas
Concealment of Equipment
Features:
PC+ABS Polycarbonate / ABS Blend
Gasketed Lid with Tamper-Proof Locking Screw
Dual Door Latches
IP55 Rated
Includes Wall Mount Hardware and Cable Grommets
Optional Pole Mount Kit Available
Material: PC+ABS Polycarbonate / ABS Blend
Color: Gray
Outer Dimensions: 13.4 x 10.4 x 4.7 Inches, (340 x 265 x 120 mm)
Inner Dimensions: 12.6 x 9.6 x 4.6 Inches, (321 x 244 x 114 mm)
Weight: 2.8 lbs. (1.3 kg)
Ratings: NEMA Type 3, 3X / IP55
Flame Rating: Meets UL94-V0
Knockout Sizes (Diameter): (4) 0.62 in. (16 mm), (4) 0.78 in. (20 mm), (4) 1.30 in. (33 mm)
Specifications
- Vendor Item No.
- NP141105
- Vendor No.
- ALTELIX, LLC