SAS WW-100K - Wireless Wiegand Bridge
Item No. SAS WW-100K
Loading
What it is Can’t run wire? Let the Wiegand wave be the wire. The Wiegand Wave is a plug-and-play wireless Wiegand bridge that lets you connect access control readers and panels without running wires. Sold as a pair; single devices available for replacement purchases. Why Installers Choose the
| Unit Tariff Amount | 0 |
Description
What it is
The Wiegand Wave is a plug-and-play wireless Wiegand bridge that lets you connect access control readers and panels without running wires. Sold as a pair; single devices available for replacement purchases.
Why Installers Choose the Wiegand Wave
Operating Current: 64mA (idle), 159mA (transmit)
Operating Power: 2.6 watts (peak)
Protocol: Wiegand (26-bit)
Relays: Two NO/NC relays (dry or 12VDC wet)
Inputs: Two contact-closure inputs to ground (triggering relays on the paired unit)
Can’t run wire? Let the Wiegand wave be the wire.
The Wiegand Wave is a plug-and-play wireless Wiegand bridge that lets you connect access control readers and panels without running wires. Sold as a pair; single devices available for replacement purchases.
Why Installers Choose the Wiegand Wave
- No cable runs: Ideal for relays or as a long-distance transmitter or receiver- eliminates the need for wiring
- No hassle warranty: Replace failed devices easily, and access Wiegand Wave Tech Support at 877-798-3241 M-F 8:00 AM to 5:00 PM CST. Don’t have to buy a pair to replace a damaged unit
- Wire-free access points: Install card readers at remote doors with no messy wiring- perfect for driveways, gates, detached offices, or renovations
- Door strike activation: A Remote reader scan signals the Central unit, which then activates the relay on the Remote side to open the door
Operating Current: 64mA (idle), 159mA (transmit)
Operating Power: 2.6 watts (peak)
Protocol: Wiegand (26-bit)
Relays: Two NO/NC relays (dry or 12VDC wet)
Inputs: Two contact-closure inputs to ground (triggering relays on the paired unit)
Technical data
- Vendor Item No.
- SAS WW-100K
- Item Category Code
- ACCESS CONTROL
Loading
SAS WW-100K - Wireless Wiegand Bridge
Item No. SAS WW-100K
Description
What it is
The Wiegand Wave is a plug-and-play wireless Wiegand bridge that lets you connect access control readers and panels without running wires. Sold as a pair; single devices available for replacement purchases.
Why Installers Choose the Wiegand Wave
Operating Current: 64mA (idle), 159mA (transmit)
Operating Power: 2.6 watts (peak)
Protocol: Wiegand (26-bit)
Relays: Two NO/NC relays (dry or 12VDC wet)
Inputs: Two contact-closure inputs to ground (triggering relays on the paired unit)
Can’t run wire? Let the Wiegand wave be the wire.
The Wiegand Wave is a plug-and-play wireless Wiegand bridge that lets you connect access control readers and panels without running wires. Sold as a pair; single devices available for replacement purchases.
Why Installers Choose the Wiegand Wave
- No cable runs: Ideal for relays or as a long-distance transmitter or receiver- eliminates the need for wiring
- No hassle warranty: Replace failed devices easily, and access Wiegand Wave Tech Support at 877-798-3241 M-F 8:00 AM to 5:00 PM CST. Don’t have to buy a pair to replace a damaged unit
- Wire-free access points: Install card readers at remote doors with no messy wiring- perfect for driveways, gates, detached offices, or renovations
- Door strike activation: A Remote reader scan signals the Central unit, which then activates the relay on the Remote side to open the door
Operating Current: 64mA (idle), 159mA (transmit)
Operating Power: 2.6 watts (peak)
Protocol: Wiegand (26-bit)
Relays: Two NO/NC relays (dry or 12VDC wet)
Inputs: Two contact-closure inputs to ground (triggering relays on the paired unit)
Technical data
- Vendor Item No.
- SAS WW-100K
- Item Category Code
- ACCESS CONTROL