DoorKing 1508-195 - Programmed UHF DKProx Windshield/Headlight Tag for Long Range Readers (Sold in Lots of 50)
Item No. 1508-195
DKS 1508-195 DK Proximity UHF Windshield/Headlight Tag The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out. The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area
Description
DKS 1508-195 DK Proximity UHF Windshield/Headlight Tag
The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out.
The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area of the antenna. The Tag relays its Wiegand number back to the antenna which reports the Tag’s number to a connected access control system. The Tag is an effortless way to open a gate for an authorized vehicle.
Tag may be mounted on the headlight (BEST RECEPTION) or windshield NO closer than 2” away from any metal. The farther away from metal, the better the reception. ONLY mount tag horizontally as shown. DO NOT mount tag vertically. It should be mounted out of the pathway of the windshield wiper blade when mounted outside. Clear adhesive tape MUST be placed over the tag to protect it from weather and car washing.
The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out.
The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area of the antenna. The Tag relays its Wiegand number back to the antenna which reports the Tag’s number to a connected access control system. The Tag is an effortless way to open a gate for an authorized vehicle.
Tag may be mounted on the headlight (BEST RECEPTION) or windshield NO closer than 2” away from any metal. The farther away from metal, the better the reception. ONLY mount tag horizontally as shown. DO NOT mount tag vertically. It should be mounted out of the pathway of the windshield wiper blade when mounted outside. Clear adhesive tape MUST be placed over the tag to protect it from weather and car washing.
Specifications
- Vendor Item No.
- 1508-195
- Item Category Code
- ACCESS CONTROL
DoorKing 1508-195 - Programmed UHF DKProx Windshield/Headlight Tag for Long Range Readers (Sold in Lots of 50)
Item No. 1508-195
DKS 1508-195 DK Proximity UHF Windshield/Headlight Tag The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out. The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area
Description
DKS 1508-195 DK Proximity UHF Windshield/Headlight Tag
The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out.
The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area of the antenna. The Tag relays its Wiegand number back to the antenna which reports the Tag’s number to a connected access control system. The Tag is an effortless way to open a gate for an authorized vehicle.
Tag may be mounted on the headlight (BEST RECEPTION) or windshield NO closer than 2” away from any metal. The farther away from metal, the better the reception. ONLY mount tag horizontally as shown. DO NOT mount tag vertically. It should be mounted out of the pathway of the windshield wiper blade when mounted outside. Clear adhesive tape MUST be placed over the tag to protect it from weather and car washing.
The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out.
The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area of the antenna. The Tag relays its Wiegand number back to the antenna which reports the Tag’s number to a connected access control system. The Tag is an effortless way to open a gate for an authorized vehicle.
Tag may be mounted on the headlight (BEST RECEPTION) or windshield NO closer than 2” away from any metal. The farther away from metal, the better the reception. ONLY mount tag horizontally as shown. DO NOT mount tag vertically. It should be mounted out of the pathway of the windshield wiper blade when mounted outside. Clear adhesive tape MUST be placed over the tag to protect it from weather and car washing.
Specifications
- Vendor Item No.
- 1508-195
- Item Category Code
- ACCESS CONTROL