Top of the page

2GIG-DW10-345 - Non-encrypted Thin Door/Window Sensor

Item No. 2GIG-DW10-345
If you're looking for a simple, yet effective door and window sensor and/or a wireless transmitter for a 2GIG Alarm System, then the 2GIG DW10-345 Sensor is a fantastic option. This is a thin, wireless security sensor that is practically invisible when mounted on a flat, white surface. As a 2GIG 345

Description

If you're looking for a simple, yet effective door and window sensor and/or a wireless transmitter for a 2GIG Alarm System, then the 2GIG DW10-345 Sensor is a fantastic option. This is a thin, wireless security sensor that is practically invisible when mounted on a flat, white surface.

As a 2GIG 345 MHz Sensor, the 2GIG DW10-345 works nicely with the 2GIG GC2, GC2e, GC3, and GC3e, as a non-encrypted sensor. You can also use it with the Honeywell Lyric if the system has had Firmware Update MR3 or higher applied. Lastly, the sensor is compatible with the 345 MHz Version of the Qolsys IQ Panel 2 Plus, as well as the Resideo PROA7PLUS if a PROTAKEOVER Module is used on the 2GIG Setting.

When programming the 2GIG DW10-345, you need to consider which function is being used. The sensor has two (2) programmable functions, with each function utilizing a different Loop Number in programming. Loop Number 1 allows the sensor to function as a wireless transmitter for a hardwired Normally Closed (NC) contact. If you use Loop 1, then you must connect using the wiring harness, which comes supplied with the sensor.

Most users will recognize Loop 2 as the more commonly used function with the 2GIG DW10-345. When you program for Loop 2, you are telling the sensor to use its integrated reed switch in conjunction with an included magnet. The magnet is placed on the moving portion of the door or window, while the sensor itself is placed on the door or window frame. Opening the door or window will cause the magnet to become separated from the sensor, thereby releasing the reed switch and telling the sensor to alert the system.

Please note that you can certainly use both Loops 1 and 2 on the DW10 at the same time if desired. In other words, you can have Loop 1 enabling the sensor to function as a wireless transmitter for a connected NC wired contact, while also simultaneously using Loop 2 to have the sensor's internal reed switch being active so that the sensor operates as a door and window contact in its own right. This configuration will require the use of two separate zones.

For power, the 2GIG DW10-345 relies on two (2) lithium CR2032 coin batteries, which come included. The maximum range for the sensor is 350 nominal feet in an open-air environment. It is a surface-mount contact that can be installed using screws or double-sided foam tape. The sensor measures 2.59"L x 1.03"W x 0.49"D, while its magnet measures 1.3"L x 0.435"W x 0.312"D. You should avoid mounting the sensor on metal surfaces, as doing so may result in RF interference and poor performance.

Specifications
  • Sensor Type: Surface-Mounted Contact
  • Compatible Systems: 2GIG Panels, Honeywell Lyric (MR3 or Higher), Qolsys IQ Panel 2 Plus 345 MHz, Resideo PROA7PLUS (Requires PROTAKEOVER)
  • Communication: Non-Encrypted Wireless
  • Sensor Dimensions: 2.59"L x 1.03"W x 0.49"D
  • Magnet Dimensions: 1.3"L x 0.435"W x 0.312"D
  • Maximum Magnet Spacing Gap: 0.4 Inches
  • Wireless Range: 350 Feet Nominal
  • Mounting Methods: Screws or Adhesive Foam Tape
  • Hardwired Input: Yes (NC Only, harness included)
  • Battery Type: Two (2) CR2032 Coin Batteries
  • Expected Battery Life: Five (5) Years

Specifications

Vendor Item No.
2GIG-DW10-345
Item Category Code
ACCESS CONTROL
Vendor No.
NORTEK SECURITY & CONTROL

2GIG-DW10-345 - Non-encrypted Thin Door/Window Sensor

Item No. 2GIG-DW10-345
If you're looking for a simple, yet effective door and window sensor and/or a wireless transmitter for a 2GIG Alarm System, then the 2GIG DW10-345 Sensor is a fantastic option. This is a thin, wireless security sensor that is practically invisible when mounted on a flat, white surface. As a 2GIG 345

Description

If you're looking for a simple, yet effective door and window sensor and/or a wireless transmitter for a 2GIG Alarm System, then the 2GIG DW10-345 Sensor is a fantastic option. This is a thin, wireless security sensor that is practically invisible when mounted on a flat, white surface.

As a 2GIG 345 MHz Sensor, the 2GIG DW10-345 works nicely with the 2GIG GC2, GC2e, GC3, and GC3e, as a non-encrypted sensor. You can also use it with the Honeywell Lyric if the system has had Firmware Update MR3 or higher applied. Lastly, the sensor is compatible with the 345 MHz Version of the Qolsys IQ Panel 2 Plus, as well as the Resideo PROA7PLUS if a PROTAKEOVER Module is used on the 2GIG Setting.

When programming the 2GIG DW10-345, you need to consider which function is being used. The sensor has two (2) programmable functions, with each function utilizing a different Loop Number in programming. Loop Number 1 allows the sensor to function as a wireless transmitter for a hardwired Normally Closed (NC) contact. If you use Loop 1, then you must connect using the wiring harness, which comes supplied with the sensor.

Most users will recognize Loop 2 as the more commonly used function with the 2GIG DW10-345. When you program for Loop 2, you are telling the sensor to use its integrated reed switch in conjunction with an included magnet. The magnet is placed on the moving portion of the door or window, while the sensor itself is placed on the door or window frame. Opening the door or window will cause the magnet to become separated from the sensor, thereby releasing the reed switch and telling the sensor to alert the system.

Please note that you can certainly use both Loops 1 and 2 on the DW10 at the same time if desired. In other words, you can have Loop 1 enabling the sensor to function as a wireless transmitter for a connected NC wired contact, while also simultaneously using Loop 2 to have the sensor's internal reed switch being active so that the sensor operates as a door and window contact in its own right. This configuration will require the use of two separate zones.

For power, the 2GIG DW10-345 relies on two (2) lithium CR2032 coin batteries, which come included. The maximum range for the sensor is 350 nominal feet in an open-air environment. It is a surface-mount contact that can be installed using screws or double-sided foam tape. The sensor measures 2.59"L x 1.03"W x 0.49"D, while its magnet measures 1.3"L x 0.435"W x 0.312"D. You should avoid mounting the sensor on metal surfaces, as doing so may result in RF interference and poor performance.

Specifications
  • Sensor Type: Surface-Mounted Contact
  • Compatible Systems: 2GIG Panels, Honeywell Lyric (MR3 or Higher), Qolsys IQ Panel 2 Plus 345 MHz, Resideo PROA7PLUS (Requires PROTAKEOVER)
  • Communication: Non-Encrypted Wireless
  • Sensor Dimensions: 2.59"L x 1.03"W x 0.49"D
  • Magnet Dimensions: 1.3"L x 0.435"W x 0.312"D
  • Maximum Magnet Spacing Gap: 0.4 Inches
  • Wireless Range: 350 Feet Nominal
  • Mounting Methods: Screws or Adhesive Foam Tape
  • Hardwired Input: Yes (NC Only, harness included)
  • Battery Type: Two (2) CR2032 Coin Batteries
  • Expected Battery Life: Five (5) Years

Specifications

Vendor Item No.
2GIG-DW10-345
Item Category Code
ACCESS CONTROL
Vendor No.
NORTEK SECURITY & CONTROL

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.Â