DoorKing 1602-090 - 1HP 115V Barrier Gate Operator
Item No. 1602-090
The 1602 operator is designed for traffic lanes up to 27 feet wide in low-use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the ro
Description
The 1602 operator is designed for traffic lanes up to 27 feet wide in low-use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the roadway.
TECHNICAL FEATURES
Mechanical
TECHNICAL FEATURES
Mechanical
- Primary Reduction is provided by a 60:1 worm gear reduction system running in a continuous oil bath.
- The arm rotates 90° in approximately 5.5 seconds
- G90 galvanized steel housing, painted white rated NEMA 4x
- Left- or right-hand mount
- DKS Pedestrian Protection System: The system reverses the barrier arm if a person is detected, and lowers the barrier arm if an unauthorized vehicle enters.
- Reporting output provides operator data to a DKS 1833, 1835, 1837, or 1838 access control system
- Compliant with UL 325 and 991. ETL Listed
- Magnetic electronic limit controls
- Auto-close timer 1-23 seconds
- P.A.M.S. (Perimeter Access Management System) sequence with a slide or swing gate operator Up input memory buffer
- Down memory option
- Multiple up commands
- Port for plug-in open (up) detector
- Port for plug-in reverse (down) detector
- Ports for plug-in loop detectors
- Programming switches
- Built-in power On/Off switch
- Environmental: 10°F to 140°F (-12°C to 62°C)
- Thermostatically Controlled Heater Kit recommended for colder environments.
- Class of Operation: II, III, IV
- Motor: 1 HP continuous duty
- Input: 115VAC
- Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D.
- 5 Years
Specifications
- Vendor Item No.
- 1602-090
- Item Category Code
- BARRIER
DoorKing 1602-090 - 1HP 115V Barrier Gate Operator
Item No. 1602-090
The 1602 operator is designed for traffic lanes up to 27 feet wide in low-use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the ro
Description
The 1602 operator is designed for traffic lanes up to 27 feet wide in low-use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the roadway.
TECHNICAL FEATURES
Mechanical
TECHNICAL FEATURES
Mechanical
- Primary Reduction is provided by a 60:1 worm gear reduction system running in a continuous oil bath.
- The arm rotates 90° in approximately 5.5 seconds
- G90 galvanized steel housing, painted white rated NEMA 4x
- Left- or right-hand mount
- DKS Pedestrian Protection System: The system reverses the barrier arm if a person is detected, and lowers the barrier arm if an unauthorized vehicle enters.
- Reporting output provides operator data to a DKS 1833, 1835, 1837, or 1838 access control system
- Compliant with UL 325 and 991. ETL Listed
- Magnetic electronic limit controls
- Auto-close timer 1-23 seconds
- P.A.M.S. (Perimeter Access Management System) sequence with a slide or swing gate operator Up input memory buffer
- Down memory option
- Multiple up commands
- Port for plug-in open (up) detector
- Port for plug-in reverse (down) detector
- Ports for plug-in loop detectors
- Programming switches
- Built-in power On/Off switch
- Environmental: 10°F to 140°F (-12°C to 62°C)
- Thermostatically Controlled Heater Kit recommended for colder environments.
- Class of Operation: II, III, IV
- Motor: 1 HP continuous duty
- Input: 115VAC
- Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D.
- 5 Years
Specifications
- Vendor Item No.
- 1602-090
- Item Category Code
- BARRIER