Linear SGEKAC - AC Gate Edge Radio Kit Monitored
Item No. LIN SGEKAC
Loading
In a typical installation, the SGET is mounted on a motorized gate, door, or barrier arm and wired to a 10K exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate. To ensure full compatibility with all gate edge supe
Description
In a typical installation, the SGET is mounted on a motorized gate, door, or barrier arm and wired to a 10K exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate. To ensure full compatibility with all gate edge supervision features, NSC recommends Miller gate edge sensors with 10K only. Please specify when ordering the sensor.
The SGER is a wireless radio control designed for use with automatic gate openers or garage door operators. The radio format provides unparalleled security. Receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the code of the transmitter into the receiver’s memory. The receiver will retain its memory even without power. The receiver will activate only from these “memorized” transmitters. The receivers can operate from 10.5-30 volts DC and are normally powered by the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NECClass 2 circuit.
The AC Sensor is capable of reliably sensing AC motor activation by being in close proximity but not electrically connected to an active motor feed wire.
Includes:
1- SGET transmitter
1- SGER receiver
1- SGACsens sensor
Features:
AC Gate Edge Radio Kit Monitored
The SGER is a wireless radio control designed for use with automatic gate openers or garage door operators. The radio format provides unparalleled security. Receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the code of the transmitter into the receiver’s memory. The receiver will retain its memory even without power. The receiver will activate only from these “memorized” transmitters. The receivers can operate from 10.5-30 volts DC and are normally powered by the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NECClass 2 circuit.
The AC Sensor is capable of reliably sensing AC motor activation by being in close proximity but not electrically connected to an active motor feed wire.
Includes:
1- SGET transmitter
1- SGER receiver
1- SGACsens sensor
Features:
AC Gate Edge Radio Kit Monitored
Specifications
- Vendor Item No.
- SGEKAC
- Item Category Code
- REPLACEMENT PARTS
Loading
Linear SGEKAC - AC Gate Edge Radio Kit Monitored
Item No. LIN SGEKAC
In a typical installation, the SGET is mounted on a motorized gate, door, or barrier arm and wired to a 10K exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate. To ensure full compatibility with all gate edge supe
Description
In a typical installation, the SGET is mounted on a motorized gate, door, or barrier arm and wired to a 10K exterior safety edge sensor which presents a closed circuit across the connecting wires when an object is hit during the closing of a gate. To ensure full compatibility with all gate edge supervision features, NSC recommends Miller gate edge sensors with 10K only. Please specify when ordering the sensor.
The SGER is a wireless radio control designed for use with automatic gate openers or garage door operators. The radio format provides unparalleled security. Receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the code of the transmitter into the receiver’s memory. The receiver will retain its memory even without power. The receiver will activate only from these “memorized” transmitters. The receivers can operate from 10.5-30 volts DC and are normally powered by the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NECClass 2 circuit.
The AC Sensor is capable of reliably sensing AC motor activation by being in close proximity but not electrically connected to an active motor feed wire.
Includes:
1- SGET transmitter
1- SGER receiver
1- SGACsens sensor
Features:
AC Gate Edge Radio Kit Monitored
The SGER is a wireless radio control designed for use with automatic gate openers or garage door operators. The radio format provides unparalleled security. Receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitter(s) that are going to be used with it. This stores the code of the transmitter into the receiver’s memory. The receiver will retain its memory even without power. The receiver will activate only from these “memorized” transmitters. The receivers can operate from 10.5-30 volts DC and are normally powered by the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NECClass 2 circuit.
The AC Sensor is capable of reliably sensing AC motor activation by being in close proximity but not electrically connected to an active motor feed wire.
Includes:
1- SGET transmitter
1- SGER receiver
1- SGACsens sensor
Features:
AC Gate Edge Radio Kit Monitored
Specifications
- Vendor Item No.
- SGEKAC
- Item Category Code
- REPLACEMENT PARTS