Linear SGET - Supervised Gate Edge Transmitter
Item No. LIN SGET
Monitor Sensing Edges and wirelessly transmit to a receiver hardwired into your gate operator with the Linear SGET. The SGET is a supervised gate edge transmitter. The transmitter hardwires into gate safety edges and, if they sense an obstruction for 1/4 second, sends a signal to the operator to rev
Description
Monitor Sensing Edges and wirelessly transmit to a receiver hardwired into your gate operator with the Linear SGET. The SGET is a supervised gate edge transmitter. The transmitter hardwires into gate safety edges and, if they sense an obstruction for 1/4 second, sends a signal to the operator to reverse movement of the gate. The SGET works in tandem with the SGER receiver, also available from North Shore Commercial Door, to improve the safety of your residential gate. Miller safety edges with 10k are recommended sensors that work best with this product.
Features:
Features:
- Compatible with 10k safety edges exclusively
- Sends signal to operator to reverse gate movement
- Easily program with internal programming button that sends a unique code to the SGER receiver
- C sized battery terminals compatible with 2 C cell batteries
- Audio and LED feedback for installation and troubleshooting
- Works with SGER receiver
- Wires directly into the Safety Edge sensors
- Miller gate edge sensors with 10k recommended sensors
- 2 output relays
- Works with all 10k monitored gate operators
- Simple setup and programming
- UL 325 listed device
- Low battery alert before failure
- Hard wired motor sensing for 12-24 volt DC motors; non-contact ACSENS module for high voltage AC motors (115-460VAC)
- 2 channels for up to 2 sensing edges and transmitters per receivers
Specifications
- Vendor Item No.
- SGET
- Item Category Code
- REPLACEMENT PARTS
Linear SGET - Supervised Gate Edge Transmitter
Item No. LIN SGET
Monitor Sensing Edges and wirelessly transmit to a receiver hardwired into your gate operator with the Linear SGET. The SGET is a supervised gate edge transmitter. The transmitter hardwires into gate safety edges and, if they sense an obstruction for 1/4 second, sends a signal to the operator to rev
Description
Monitor Sensing Edges and wirelessly transmit to a receiver hardwired into your gate operator with the Linear SGET. The SGET is a supervised gate edge transmitter. The transmitter hardwires into gate safety edges and, if they sense an obstruction for 1/4 second, sends a signal to the operator to reverse movement of the gate. The SGET works in tandem with the SGER receiver, also available from North Shore Commercial Door, to improve the safety of your residential gate. Miller safety edges with 10k are recommended sensors that work best with this product.
Features:
Features:
- Compatible with 10k safety edges exclusively
- Sends signal to operator to reverse gate movement
- Easily program with internal programming button that sends a unique code to the SGER receiver
- C sized battery terminals compatible with 2 C cell batteries
- Audio and LED feedback for installation and troubleshooting
- Works with SGER receiver
- Wires directly into the Safety Edge sensors
- Miller gate edge sensors with 10k recommended sensors
- 2 output relays
- Works with all 10k monitored gate operators
- Simple setup and programming
- UL 325 listed device
- Low battery alert before failure
- Hard wired motor sensing for 12-24 volt DC motors; non-contact ACSENS module for high voltage AC motors (115-460VAC)
- 2 channels for up to 2 sensing edges and transmitters per receivers
Specifications
- Vendor Item No.
- SGET
- Item Category Code
- REPLACEMENT PARTS