Miller Edge MGO20-5 - 5' 3-Sided Monitored Sensing Edge for Gates
Item No. MI MGO20-5
Loading
MGO20 may be used 1-1/4 to 1-1/2-inch-thick slide gates and is custom manufactured to required length. The MG-020 provides 3-sided sensitivity to signal when touch activated on the front or sides. The MG020 slide in style edge is designed to install easily when used with a companion PVC or aluminum
Description
MGO20 may be used 1-1/4 to 1-1/2-inch-thick slide gates and is custom manufactured to required length. The MG-020 provides 3-sided sensitivity to signal when touch activated on the front or sides.
The MG020 slide in style edge is designed to install easily when used with a companion PVC or aluminum mounting channel.
The small profile of the T2-Series Monitored MGO20 Sensing Edge sensors allows for versatility to suit a wide variety of applications from motorized doors and gates to industrial safeguarding on plant equipment. This sensor features 3 sides of protection which make it perfect for swing and slide gates. When pressure is applied to the edge, an electrical signal is immediately sent to the operator (or any other electric component) which typically stops and reverses the movement.
Models have been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. Minimal care is required for the SensingEdgeâ„¢ since they are manufactured with only the most durable materials and the highest quality control standards.
Other applications include use along conveyor systems to detect operator reach in, below lifts to detect pinch points and on a wide variety of plant equipment where touch sensitive detection is desired. SensingEdgesâ„¢ should be tested and examined at least once a month for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, Miller Edge SensingEdgesâ„¢ offer years of trouble-free operation.
We are proud to offer the MGO20 Safety Edge in 4', 5', and 6' Lengths, in Black or OSHA Yellow, and with the wires in a right hand, left hand, or universal configuration. Special edges may be ordered, please Contact Us if you need an option that isn't show here and our technical support team will work with you to design a system to meet your safeguarding needs.
T2-Series Monitored MGO20 Sensing Edge Features and Benefits:
Provides Touch Sensitive Signaling On 3-Sides
Small Profile with Versatile Mounting Options (Vertically or Horizontally)
Easy to Install with SensingEdge Mounting Channel (Sold Separately)
Monitored Edge is ANSI/UL325 Recognized Component
For Use With:
Sliding Doors and Fence Gates
Swinging Doors and Fence Gates
Vertical Lift and Pivot Fence Gates
Elevator Doors
Material Handling Systems
Rolling Shutters
Conveyor Systems
Any Pinch Point Protection Application!
Specifications
The MG020 slide in style edge is designed to install easily when used with a companion PVC or aluminum mounting channel.
The small profile of the T2-Series Monitored MGO20 Sensing Edge sensors allows for versatility to suit a wide variety of applications from motorized doors and gates to industrial safeguarding on plant equipment. This sensor features 3 sides of protection which make it perfect for swing and slide gates. When pressure is applied to the edge, an electrical signal is immediately sent to the operator (or any other electric component) which typically stops and reverses the movement.
Models have been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. Minimal care is required for the SensingEdgeâ„¢ since they are manufactured with only the most durable materials and the highest quality control standards.
Other applications include use along conveyor systems to detect operator reach in, below lifts to detect pinch points and on a wide variety of plant equipment where touch sensitive detection is desired. SensingEdgesâ„¢ should be tested and examined at least once a month for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, Miller Edge SensingEdgesâ„¢ offer years of trouble-free operation.
We are proud to offer the MGO20 Safety Edge in 4', 5', and 6' Lengths, in Black or OSHA Yellow, and with the wires in a right hand, left hand, or universal configuration. Special edges may be ordered, please Contact Us if you need an option that isn't show here and our technical support team will work with you to design a system to meet your safeguarding needs.
T2-Series Monitored MGO20 Sensing Edge Features and Benefits:
Provides Touch Sensitive Signaling On 3-Sides
Small Profile with Versatile Mounting Options (Vertically or Horizontally)
Easy to Install with SensingEdge Mounting Channel (Sold Separately)
Monitored Edge is ANSI/UL325 Recognized Component
For Use With:
Sliding Doors and Fence Gates
Swinging Doors and Fence Gates
Vertical Lift and Pivot Fence Gates
Elevator Doors
Material Handling Systems
Rolling Shutters
Conveyor Systems
Any Pinch Point Protection Application!
Specifications
- Color:Â Â Â Black or OSHA Yellow
- Length:Â Â Â Per specification to nearest 1/4", Stock sizes are 4', 5', and 6'. For special sizing, please call to order 1-800-355-2335
- Sensitivity:Â Â Â nominal 4-7 lbf
- Activation:Â Â Â MGO20 senses on three sides
- Lead Wire:Â Â Â 24" SJTO 18 gauge
- Wire Outlet Location:Â Â Â right-hand, left-hand, or universal
- Electrical Requirements:Â Â Â Maximum 24 volts, 1/2 amp AC or DC power
- Electrical Diagram:Â Â Â 2 wire N.O. contact
- Contact Element:   Alumaglas®
- Mounting Channel:Â Â Â Black extruded PVC or Aluminum
- Sensing Edge:Â Â Â Extruded flexible PVC
- Temperature Range:   -30°F to +140°F
Specifications
- Vendor Item No.
- MGO20-5
- Item Category Code
- SAFETY
Loading
Miller Edge MGO20-5 - 5' 3-Sided Monitored Sensing Edge for Gates
Item No. MI MGO20-5
MGO20 may be used 1-1/4 to 1-1/2-inch-thick slide gates and is custom manufactured to required length. The MG-020 provides 3-sided sensitivity to signal when touch activated on the front or sides. The MG020 slide in style edge is designed to install easily when used with a companion PVC or aluminum
Description
MGO20 may be used 1-1/4 to 1-1/2-inch-thick slide gates and is custom manufactured to required length. The MG-020 provides 3-sided sensitivity to signal when touch activated on the front or sides.
The MG020 slide in style edge is designed to install easily when used with a companion PVC or aluminum mounting channel.
The small profile of the T2-Series Monitored MGO20 Sensing Edge sensors allows for versatility to suit a wide variety of applications from motorized doors and gates to industrial safeguarding on plant equipment. This sensor features 3 sides of protection which make it perfect for swing and slide gates. When pressure is applied to the edge, an electrical signal is immediately sent to the operator (or any other electric component) which typically stops and reverses the movement.
Models have been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. Minimal care is required for the SensingEdgeâ„¢ since they are manufactured with only the most durable materials and the highest quality control standards.
Other applications include use along conveyor systems to detect operator reach in, below lifts to detect pinch points and on a wide variety of plant equipment where touch sensitive detection is desired. SensingEdgesâ„¢ should be tested and examined at least once a month for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, Miller Edge SensingEdgesâ„¢ offer years of trouble-free operation.
We are proud to offer the MGO20 Safety Edge in 4', 5', and 6' Lengths, in Black or OSHA Yellow, and with the wires in a right hand, left hand, or universal configuration. Special edges may be ordered, please Contact Us if you need an option that isn't show here and our technical support team will work with you to design a system to meet your safeguarding needs.
T2-Series Monitored MGO20 Sensing Edge Features and Benefits:
Provides Touch Sensitive Signaling On 3-Sides
Small Profile with Versatile Mounting Options (Vertically or Horizontally)
Easy to Install with SensingEdge Mounting Channel (Sold Separately)
Monitored Edge is ANSI/UL325 Recognized Component
For Use With:
Sliding Doors and Fence Gates
Swinging Doors and Fence Gates
Vertical Lift and Pivot Fence Gates
Elevator Doors
Material Handling Systems
Rolling Shutters
Conveyor Systems
Any Pinch Point Protection Application!
Specifications
The MG020 slide in style edge is designed to install easily when used with a companion PVC or aluminum mounting channel.
The small profile of the T2-Series Monitored MGO20 Sensing Edge sensors allows for versatility to suit a wide variety of applications from motorized doors and gates to industrial safeguarding on plant equipment. This sensor features 3 sides of protection which make it perfect for swing and slide gates. When pressure is applied to the edge, an electrical signal is immediately sent to the operator (or any other electric component) which typically stops and reverses the movement.
Models have been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. Minimal care is required for the SensingEdgeâ„¢ since they are manufactured with only the most durable materials and the highest quality control standards.
Other applications include use along conveyor systems to detect operator reach in, below lifts to detect pinch points and on a wide variety of plant equipment where touch sensitive detection is desired. SensingEdgesâ„¢ should be tested and examined at least once a month for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, Miller Edge SensingEdgesâ„¢ offer years of trouble-free operation.
We are proud to offer the MGO20 Safety Edge in 4', 5', and 6' Lengths, in Black or OSHA Yellow, and with the wires in a right hand, left hand, or universal configuration. Special edges may be ordered, please Contact Us if you need an option that isn't show here and our technical support team will work with you to design a system to meet your safeguarding needs.
T2-Series Monitored MGO20 Sensing Edge Features and Benefits:
Provides Touch Sensitive Signaling On 3-Sides
Small Profile with Versatile Mounting Options (Vertically or Horizontally)
Easy to Install with SensingEdge Mounting Channel (Sold Separately)
Monitored Edge is ANSI/UL325 Recognized Component
For Use With:
Sliding Doors and Fence Gates
Swinging Doors and Fence Gates
Vertical Lift and Pivot Fence Gates
Elevator Doors
Material Handling Systems
Rolling Shutters
Conveyor Systems
Any Pinch Point Protection Application!
Specifications
- Color:Â Â Â Black or OSHA Yellow
- Length:Â Â Â Per specification to nearest 1/4", Stock sizes are 4', 5', and 6'. For special sizing, please call to order 1-800-355-2335
- Sensitivity:Â Â Â nominal 4-7 lbf
- Activation:Â Â Â MGO20 senses on three sides
- Lead Wire:Â Â Â 24" SJTO 18 gauge
- Wire Outlet Location:Â Â Â right-hand, left-hand, or universal
- Electrical Requirements:Â Â Â Maximum 24 volts, 1/2 amp AC or DC power
- Electrical Diagram:Â Â Â 2 wire N.O. contact
- Contact Element:   Alumaglas®
- Mounting Channel:Â Â Â Black extruded PVC or Aluminum
- Sensing Edge:Â Â Â Extruded flexible PVC
- Temperature Range:   -30°F to +140°F
Specifications
- Vendor Item No.
- MGO20-5
- Item Category Code
- SAFETY