EMX 102-K - Universal UL325 Monitored Thru-Beam Photoeye Kit in Gray
Item No. EMX IRB-MON-GREY
Loading
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use. This universal UL325 thru
Description
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.
This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment.
Kit includes:
IRB-MON -Transmitter, receiver
IRB-SH-SET - Set of 2 Gray powder coated steel protective hoods.
IRB-RX-SH - Receiver sunshield
Features:
This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment.
Kit includes:
IRB-MON -Transmitter, receiver
IRB-SH-SET - Set of 2 Gray powder coated steel protective hoods.
IRB-RX-SH - Receiver sunshield
Features:
- Type B1, non-contact sensor
- UL325-2018 compliant
- Lens-less design
- Simple 2-wire connection
- Relay contacts available
- NEMA 4X enclosure
- Selectable frequency modes
- Operating Range: up to 115 ft. (35m)
- Sensitivity adjustment: potentiometer
- The IRB-MON universal UL325 thru beam photoeye has 4 monitoring interfaces:
- Normally closed
- Two-wire pulsed (2 freq)
- Two-wire pulsed (3 freq)
- 10k resistive termination
- Operating range: up to 115 ft. (35m)
- Sensitivity adjustment: potentiometer
- Power indicator: Green LED
- Detect indicator: Green LED
- Mode selection switch: 3 modes, relay output, pulsed (3 frequency), pulsed (2 frequency)
- Relay output operation: Light on/dark on selection
- Relay output: Form C contacts (NO, COM, NC)
- Resistive termination: 10k Ohm across NO contact
- Power protection: Thermal fuse
- Transmitter power cycle: >300mS (for use in configuration 0 Monitored)
- Power supply: 6…35 VDC, 12…24VAC (configuration 0-relay only)
- Current (config. 1 and 2): 15mA (12VDC, includes TX and RX wired in parallel)
- Current (config. 0): 60mA (relay activated)
- Operating temperature: -40°F…170°F (-40°C…77°C)
- Environmental: NEMA 4X
- Dimensions (L x W x H): 2.3” (57mm) x 2.6” (65mm) x 3.7” (94mm)
- Weight: TX – 0.35 lbs. (159 g), RX 0.35 lbs. (159 g)
- Connections: TX-2 terminal, RX-5 terminal
Specifications
- Vendor Item No.
- EMX-102-K (GREY)
- Item Category Code
- SAFETY
- Description 6
- EMXINDUSTRIES
Loading
EMX 102-K - Universal UL325 Monitored Thru-Beam Photoeye Kit in Gray
Item No. EMX IRB-MON-GREY
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use. This universal UL325 thru
Description
The IRB-MON is a monitored, weather-proof, thru beam infrared photoeye solution providing entrapment protection for doors, gates and barriers. The IRB-MON Safety Photo Beam is UL325-2018 compliant and housed in a rugged NEMA 4X enclosure suitable for indoor and outdoor use.
This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment.
Kit includes:
IRB-MON -Transmitter, receiver
IRB-SH-SET - Set of 2 Gray powder coated steel protective hoods.
IRB-RX-SH - Receiver sunshield
Features:
This universal UL325 thru beam photoeye can be used with a wide variety of monitored operators. Additionally, the IRB-MON photoeye is compatible with most non-monitored legacy products. Its robust construction minimizes fogging and false triggering to provide easy alignment.
Kit includes:
IRB-MON -Transmitter, receiver
IRB-SH-SET - Set of 2 Gray powder coated steel protective hoods.
IRB-RX-SH - Receiver sunshield
Features:
- Type B1, non-contact sensor
- UL325-2018 compliant
- Lens-less design
- Simple 2-wire connection
- Relay contacts available
- NEMA 4X enclosure
- Selectable frequency modes
- Operating Range: up to 115 ft. (35m)
- Sensitivity adjustment: potentiometer
- The IRB-MON universal UL325 thru beam photoeye has 4 monitoring interfaces:
- Normally closed
- Two-wire pulsed (2 freq)
- Two-wire pulsed (3 freq)
- 10k resistive termination
- Operating range: up to 115 ft. (35m)
- Sensitivity adjustment: potentiometer
- Power indicator: Green LED
- Detect indicator: Green LED
- Mode selection switch: 3 modes, relay output, pulsed (3 frequency), pulsed (2 frequency)
- Relay output operation: Light on/dark on selection
- Relay output: Form C contacts (NO, COM, NC)
- Resistive termination: 10k Ohm across NO contact
- Power protection: Thermal fuse
- Transmitter power cycle: >300mS (for use in configuration 0 Monitored)
- Power supply: 6…35 VDC, 12…24VAC (configuration 0-relay only)
- Current (config. 1 and 2): 15mA (12VDC, includes TX and RX wired in parallel)
- Current (config. 0): 60mA (relay activated)
- Operating temperature: -40°F…170°F (-40°C…77°C)
- Environmental: NEMA 4X
- Dimensions (L x W x H): 2.3” (57mm) x 2.6” (65mm) x 3.7” (94mm)
- Weight: TX – 0.35 lbs. (159 g), RX 0.35 lbs. (159 g)
- Connections: TX-2 terminal, RX-5 terminal
Specifications
- Vendor Item No.
- EMX-102-K (GREY)
- Item Category Code
- SAFETY
- Description 6
- EMXINDUSTRIES