Seco Larm E-931-S33PRGQ - 33' Polarized Reflective Photoelectric IR Beam Sensor
Item No. SEA E-931-S33PRGQ
Features Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected Weatherproof (IP55) Anti-condensation housing 12-30V DC/AC 60Hz, 100mA Up to 33ft (10m) sensing range Round reflector, Diameter: 3-1/4″ (82mm) Form C relay: 500mA@30VAC/VDC Beam status LED
Description
Features
- Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected
- Weatherproof (IP55)
- Anti-condensation housing
- 12-30V DC/AC 60Hz, 100mA
- Up to 33ft (10m) sensing range
- Round reflector, Diameter: 3-1/4″ (82mm)
- Form C relay: 500mA@30VAC/VDC
- Beam status LED
- Compact size: 4-13/16″x2-3/8″x2-7/16″ (122x60x62mm)
- N.C. Tamper switch: 500mA@30VAC/VDC
- Monitored Outputs:
- N.C.
- 10kΩ Resistor
- Hood included for both sensor and reflector
- Sensor for garage doors, outdoor gates or overhead doors
- Sensor for industrial automation to detect objects on manufacturing line
- Type   Polarized reflective photoelectric beam sensor
- Current Draw   Standby- 55mA@12VDC, Active- 40mA@12VDC
- Sensing Range   Up to 33′ (10m)
- Operating Voltage   12-30V DC/AC 60Hz, 100mA
- Reaction time   10ms
- IP Rating   Weatherproof IP55
- Light Source   IR LED/Wavelength 740nm
- LEDs – Red   Solid, No beam signal, triggered
- LEDs – Green   Solid, Good beam signal, properly aligned
- LEDs   Alternating flash- Poor beam signal
- Alarm Output   SPDT relay output (NO/NC/COM)
- Switching Capacity   500mA@30VAC/VDC
- Tamper Switch   N.C., 500mA@30VAC/VDC
- Operating Temperature   -4º~131º F (-20º~55º C)
- Enclosure   IP55 Waterproof
Specifications
- Vendor Item No.
- E-931-S33PRGQ
- Item Category Code
- SAFETY
Seco Larm E-931-S33PRGQ - 33' Polarized Reflective Photoelectric IR Beam Sensor
Item No. SEA E-931-S33PRGQ
Features Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected Weatherproof (IP55) Anti-condensation housing 12-30V DC/AC 60Hz, 100mA Up to 33ft (10m) sensing range Round reflector, Diameter: 3-1/4″ (82mm) Form C relay: 500mA@30VAC/VDC Beam status LED
Description
Features
- Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected
- Weatherproof (IP55)
- Anti-condensation housing
- 12-30V DC/AC 60Hz, 100mA
- Up to 33ft (10m) sensing range
- Round reflector, Diameter: 3-1/4″ (82mm)
- Form C relay: 500mA@30VAC/VDC
- Beam status LED
- Compact size: 4-13/16″x2-3/8″x2-7/16″ (122x60x62mm)
- N.C. Tamper switch: 500mA@30VAC/VDC
- Monitored Outputs:
- N.C.
- 10kΩ Resistor
- Hood included for both sensor and reflector
- Sensor for garage doors, outdoor gates or overhead doors
- Sensor for industrial automation to detect objects on manufacturing line
- Type   Polarized reflective photoelectric beam sensor
- Current Draw   Standby- 55mA@12VDC, Active- 40mA@12VDC
- Sensing Range   Up to 33′ (10m)
- Operating Voltage   12-30V DC/AC 60Hz, 100mA
- Reaction time   10ms
- IP Rating   Weatherproof IP55
- Light Source   IR LED/Wavelength 740nm
- LEDs – Red   Solid, No beam signal, triggered
- LEDs – Green   Solid, Good beam signal, properly aligned
- LEDs   Alternating flash- Poor beam signal
- Alarm Output   SPDT relay output (NO/NC/COM)
- Switching Capacity   500mA@30VAC/VDC
- Tamper Switch   N.C., 500mA@30VAC/VDC
- Operating Temperature   -4º~131º F (-20º~55º C)
- Enclosure   IP55 Waterproof
Specifications
- Vendor Item No.
- E-931-S33PRGQ
- Item Category Code
- SAFETY