Top of the page

Seco Larm E-960-D90Q - 90' Outdoor Twin Laser Beam Alignment Photobeam

Item No. SEA E-960-D90
 Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors. Features Built-in laser beam alignment system speeds accurate, reliable positioning Twin infrared beams provide reliabl

Description

 Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Features
  • Built-in laser beam alignment system speeds accurate, reliable positioning
  • Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
  • Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof (IP55), sunlight-filtering case for indoor & outdoor use
  • Anti-frost system so that beam functions even in extreme conditions
  • Automatic input power filtering with special noise rejection circuitry
  • NC/NO alarm output
  • N.C. tamper circuit included
  • Non-polarized power inputs
  • Quick, easy installation with built-in laser beam alignment system
  • Response time adjustable for nearly all situations
  • Response time is set at the factory to the shortest time (50ms)
Specifications
  • Type    Twin Photobeam Detectors with Laser Beam Alignment
  • Current Draw    64mA max.
  • Sensing Range    Outdoor- 90′ (30m), Indoor- 190′ (60m)
  • Operating Voltage    10~30VAC/VDC (Non-polarized)
  • IP Rating    Weatherproof IP55
  • Interupt Speed    50msec~700msec (variable)
  • LEDs – Red   ON indicates transmitter and receiver not aligned or beam is broken
  • LEDs – Yellow    ON indicates weak receiver signal or beam is broken
  • LEDs – Green    ON indicates unit connected to power
  • Detection System    Simultaneous break of 2 beams
  • Alarm Output    NO/NC relay, 1A @ 120VAC, min. 1 sec.
  • Tamper Output    NC. switch, 1A@120VAC
  • Case material    PC Resin
  • Laser Wavelength    650nm
  • Operating Temperature    -13º~+131º F (-25º~+55º C)
  • Laser Output Power    5mW
  • Alignment Angle    Horizontal (+/-)90º, Vertical: (+/-)5º
  • Weight    2.5 lbs. (1.1kg)

Specifications

Vendor Item No.
E-960-D90Q
Item Category Code
SAFETY

Seco Larm E-960-D90Q - 90' Outdoor Twin Laser Beam Alignment Photobeam

Item No. SEA E-960-D90
 Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors. Features Built-in laser beam alignment system speeds accurate, reliable positioning Twin infrared beams provide reliabl

Description

 Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Features
  • Built-in laser beam alignment system speeds accurate, reliable positioning
  • Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
  • Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof (IP55), sunlight-filtering case for indoor & outdoor use
  • Anti-frost system so that beam functions even in extreme conditions
  • Automatic input power filtering with special noise rejection circuitry
  • NC/NO alarm output
  • N.C. tamper circuit included
  • Non-polarized power inputs
  • Quick, easy installation with built-in laser beam alignment system
  • Response time adjustable for nearly all situations
  • Response time is set at the factory to the shortest time (50ms)
Specifications
  • Type    Twin Photobeam Detectors with Laser Beam Alignment
  • Current Draw    64mA max.
  • Sensing Range    Outdoor- 90′ (30m), Indoor- 190′ (60m)
  • Operating Voltage    10~30VAC/VDC (Non-polarized)
  • IP Rating    Weatherproof IP55
  • Interupt Speed    50msec~700msec (variable)
  • LEDs – Red   ON indicates transmitter and receiver not aligned or beam is broken
  • LEDs – Yellow    ON indicates weak receiver signal or beam is broken
  • LEDs – Green    ON indicates unit connected to power
  • Detection System    Simultaneous break of 2 beams
  • Alarm Output    NO/NC relay, 1A @ 120VAC, min. 1 sec.
  • Tamper Output    NC. switch, 1A@120VAC
  • Case material    PC Resin
  • Laser Wavelength    650nm
  • Operating Temperature    -13º~+131º F (-25º~+55º C)
  • Laser Output Power    5mW
  • Alignment Angle    Horizontal (+/-)90º, Vertical: (+/-)5º
  • Weight    2.5 lbs. (1.1kg)

Specifications

Vendor Item No.
E-960-D90Q
Item Category Code
SAFETY

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.Â