EMX LP-D-TEK - 12-24VAC/DC Low Power Vehicle Loop Detector
Item No. EMX LP-D-TEK12
The LP D-TEK was designed for applications where low power consumption is desired. The LP D-TEK low-power vehicle detector’s low 9 mA current draw makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply. This unit also offers
Description
The LP D-TEK was designed for applications where low power consumption is desired. The LP D-TEK low-power vehicle detector’s low 9 mA current draw makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply.
This unit also offers surge protection and two relays. Contact us today to learn more about the LP D-TEK low-power vehicle detector.
Features:
This unit also offers surge protection and two relays. Contact us today to learn more about the LP D-TEK low-power vehicle detector.
Features:
- 9 mA current draw standby and detect modes “fail safe”
- Surge protection
- Loop isolation transformer
- Built-in loop conditioner
- Aluminum RF shield housing
- Loop diagnostics
- Frequency counter
- 2 relays
- Power Supply: 12 – 24 Volts AC/DC
- Current Consumption: < 9 mA
- Operating Temp: -40°F to 180°F
- Surge Protection: Zener Diode /MOV
- Output Relays (2): 1Amp 30 VDC
- Loop Input: Transformer isolation, lightning and transient protection (1)
- Loop Inductance Range: 20 – 2000 uH Q-factor of 5 or higher
- Tuning: Automatic on reset or power up
- Tracking: Automatic for environmental changes
- Size: Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
- Housing: Extruded Anodized Aluminum
- Connector: 86CP11 11 pin male
Specifications
- Vendor Item No.
- LP-D-TEK
- Item Category Code
- SAFETY
EMX LP-D-TEK - 12-24VAC/DC Low Power Vehicle Loop Detector
Item No. EMX LP-D-TEK12
The LP D-TEK was designed for applications where low power consumption is desired. The LP D-TEK low-power vehicle detector’s low 9 mA current draw makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply. This unit also offers
Description
The LP D-TEK was designed for applications where low power consumption is desired. The LP D-TEK low-power vehicle detector’s low 9 mA current draw makes it ideal for solar applications and gate or door operators that require many accessories drawing from the same power supply.
This unit also offers surge protection and two relays. Contact us today to learn more about the LP D-TEK low-power vehicle detector.
Features:
This unit also offers surge protection and two relays. Contact us today to learn more about the LP D-TEK low-power vehicle detector.
Features:
- 9 mA current draw standby and detect modes “fail safe”
- Surge protection
- Loop isolation transformer
- Built-in loop conditioner
- Aluminum RF shield housing
- Loop diagnostics
- Frequency counter
- 2 relays
- Power Supply: 12 – 24 Volts AC/DC
- Current Consumption: < 9 mA
- Operating Temp: -40°F to 180°F
- Surge Protection: Zener Diode /MOV
- Output Relays (2): 1Amp 30 VDC
- Loop Input: Transformer isolation, lightning and transient protection (1)
- Loop Inductance Range: 20 – 2000 uH Q-factor of 5 or higher
- Tuning: Automatic on reset or power up
- Tracking: Automatic for environmental changes
- Size: Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
- Housing: Extruded Anodized Aluminum
- Connector: 86CP11 11 pin male
Specifications
- Vendor Item No.
- LP-D-TEK
- Item Category Code
- SAFETY