2 PART POLYURETHANE LOOP SEALANT

Item No.BD LG2
BD-LG2 is a two component polyurethane detector loop sealant. It is designed for use in both asphalt and concrete pavement to provide a weather and chemical resistant waterproof seal. BD-LG2 Detector Loop Sealant exhibits exceptional chemical resistance to de-icing salts (including 50% by weight pot

Description

BD-LG2 is a two component polyurethane detector loop sealant. It is designed for use in both asphalt and concrete pavement to provide a weather and chemical resistant waterproof seal.
BD-LG2 Detector Loop Sealant exhibits exceptional chemical resistance to de-icing salts (including 50% by weight potassium acetate), gasoline, hydraulic brake fluid, and motor oil. BD-LG2 requires no clean up, since the mixing tips are disposable.
USES
BD-LG2 is primarily used as a fast cure, protective seal for inductance loops installed in saw-cut slots. It may be used as a sealant for saw cut slots in concrete and asphalt surfaces.
COVERAGE CHARTS
3/16″ Wide Blade/Groove
(Recommended Cut Width)
Cut Depth      Coverage Per Tube      Coverage Per Case
1 ¼”                 18′                                    216′                     
1 ½”                14′                                 168′                     
DISPENSING GUN
BD-LG2 is packaged in a 600ml dual cylinder cartridge (300ml:300ml). It requires a compatible dual cartridge dispensing gun to use.  We offer a high quality dripless dispensing gun: BD LG2-GUN.
CURING
BD-LS will skin over in approximately 45 minutes at 70° F (21° C) and 50% relative humidity. Temperatures below 32°F (0°C) and/or low humidity will slow skin/cure time. Strength will start to develop immediately and continue increasing for 7 days after application. However, if groove is slightly under-filled traffic is permitted immediately after application. Not designed for installation in freezing temperatures. Use BD-LG2 for cold weather installations.
PACKAGING
21 fl. oz. (600 mL) ratio pack tubes to be dispensed through a manual gun dispenser. Dark Gray Color Only.
Dispensing gun available: Part# BD-LG2-GUN

SUPERIOR FEATURES
  • Self leveling.
  • Can cure in freezing temperatures.
  • Quick cure when used in warm temperatures.
  • 15 minute gel time in 60° F  (16° C) weather.
  • 100% Solids, no shrinking occurs when curing. Contains no solvents.
  • Zero V.O.C.
  • Static mixer included with every cartridge.
  • Has no chemical reaction to asphalt or concrete and will not cause deterioration of the surface.
  • Exhibits no bubbling or “mushrooming”.
  • Low viscosity sealant, flows easily.
  • 600ml dual cartridge dispensing gun available. Part # BD LG2-GUN.



Specifications

Vendor Item No.
LG2
Item Category Code
LOOP
Vendor No.
BD LOOPS

2 PART POLYURETHANE LOOP SEALANT

Item No.BD LG2
BD-LG2 is a two component polyurethane detector loop sealant. It is designed for use in both asphalt and concrete pavement to provide a weather and chemical resistant waterproof seal. BD-LG2 Detector Loop Sealant exhibits exceptional chemical resistance to de-icing salts (including 50% by weight pot

Description

BD-LG2 is a two component polyurethane detector loop sealant. It is designed for use in both asphalt and concrete pavement to provide a weather and chemical resistant waterproof seal.
BD-LG2 Detector Loop Sealant exhibits exceptional chemical resistance to de-icing salts (including 50% by weight potassium acetate), gasoline, hydraulic brake fluid, and motor oil. BD-LG2 requires no clean up, since the mixing tips are disposable.
USES
BD-LG2 is primarily used as a fast cure, protective seal for inductance loops installed in saw-cut slots. It may be used as a sealant for saw cut slots in concrete and asphalt surfaces.
COVERAGE CHARTS
3/16″ Wide Blade/Groove
(Recommended Cut Width)
Cut Depth      Coverage Per Tube      Coverage Per Case
1 ¼”                 18′                                    216′                     
1 ½”                14′                                 168′                     
DISPENSING GUN
BD-LG2 is packaged in a 600ml dual cylinder cartridge (300ml:300ml). It requires a compatible dual cartridge dispensing gun to use.  We offer a high quality dripless dispensing gun: BD LG2-GUN.
CURING
BD-LS will skin over in approximately 45 minutes at 70° F (21° C) and 50% relative humidity. Temperatures below 32°F (0°C) and/or low humidity will slow skin/cure time. Strength will start to develop immediately and continue increasing for 7 days after application. However, if groove is slightly under-filled traffic is permitted immediately after application. Not designed for installation in freezing temperatures. Use BD-LG2 for cold weather installations.
PACKAGING
21 fl. oz. (600 mL) ratio pack tubes to be dispensed through a manual gun dispenser. Dark Gray Color Only.
Dispensing gun available: Part# BD-LG2-GUN

SUPERIOR FEATURES
  • Self leveling.
  • Can cure in freezing temperatures.
  • Quick cure when used in warm temperatures.
  • 15 minute gel time in 60° F  (16° C) weather.
  • 100% Solids, no shrinking occurs when curing. Contains no solvents.
  • Zero V.O.C.
  • Static mixer included with every cartridge.
  • Has no chemical reaction to asphalt or concrete and will not cause deterioration of the surface.
  • Exhibits no bubbling or “mushrooming”.
  • Low viscosity sealant, flows easily.
  • 600ml dual cartridge dispensing gun available. Part # BD LG2-GUN.



Specifications

Vendor Item No.
LG2
Item Category Code
LOOP
Vendor No.
BD LOOPS

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.