Top of the page

EMX ULT-II - Ultra 2 D-Tek Plug-In Loop Detector w/7-Pin Screw Terminal

Item No. EMX ULTRA 2 D-TEK
The ULTRA II vehicle loop detector is a compact, energy-efficient design with a user-friendly, detachable 7-pin terminal block that simplifies set-up. This vehicle loop detector provides a relay output indicating vehicle presence or pulse on entry. The ULT-II also has an option for automatic sensiti

Description

The ULTRA II vehicle loop detector is a compact, energy-efficient design with a user-friendly, detachable 7-pin terminal block that simplifies set-up.

This vehicle loop detector provides a relay output indicating vehicle presence or pulse on entry. The ULT-II also has an option for automatic sensitivity boost (ASB) which causes the sensitivity to increase following initial detection. This feature is useful to prevent dropout when detecting high-bed vehicles.

The ULT-II is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™ display. Ten sensitivity settings allow for finer adjustment of the detection level, and four frequency selections help to prevent crosstalk in multi-loop applications.

Features:
  • ULTRAMETER™ displays optimum sensitivity setting / diagnostic aid
  • Fail safe in the event of a loop failure
  • Fail secure in the event of a power loss
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
  • 4 operating frequencies
  • Lightning and surge protection
  • Frequency counter
  • Fail safe operation
  • CE compliant
Specifications:
  • Power Supply: 12-24 VDC/AC
  • Current Draw: 18 mA max.
  • Dimensions: L=3.0in (76 mm) W=0.9in (22 mm) H=2.75in (70 mm)
  • Weight: 0.15 lbs.(69g)
  • Loop Inductance: 20…2000µH (Q factor >5)
  • Environmental Tracking: Automatic Compensation
  • Operating Environment: -40° C to 82° C (-40°F to 180° F) 0 to 95% relative humidity
  • Housing Material: ABS
  • Connection: 7 position screw terminal
  • Loop Compensation: Isolation transformer allows operation with poor quality loops
  • Loop Frequency: 4 settings (low, med-low, med-hi, high)
  • Surge Protection: Loop circuitry protected by surge suppressors
  • ULTRAMETER Display: Indicates optimum sensitivity level
  • Ouput: Relay 1A @24 VDC Common, Normally Open, Normally Closed
  • Power/Loop Fault Indicator: Green LED
  • Detect/Frequency Count Indicator: Red LED
  • Frequency Count: To aid in detector set up and prevention of crosstalk
  • Pulse/Presence: Allows the relay output to send either a pulse output or have constant presence
  • Sensitivity: 10 levels, 0-9
  • ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high bed vehicles

Specifications

Vendor Item No.
ULTRA 2 D-TEK
Item Category Code
SAFETY

EMX ULT-II - Ultra 2 D-Tek Plug-In Loop Detector w/7-Pin Screw Terminal

Item No. EMX ULTRA 2 D-TEK
The ULTRA II vehicle loop detector is a compact, energy-efficient design with a user-friendly, detachable 7-pin terminal block that simplifies set-up. This vehicle loop detector provides a relay output indicating vehicle presence or pulse on entry. The ULT-II also has an option for automatic sensiti

Description

The ULTRA II vehicle loop detector is a compact, energy-efficient design with a user-friendly, detachable 7-pin terminal block that simplifies set-up.

This vehicle loop detector provides a relay output indicating vehicle presence or pulse on entry. The ULT-II also has an option for automatic sensitivity boost (ASB) which causes the sensitivity to increase following initial detection. This feature is useful to prevent dropout when detecting high-bed vehicles.

The ULT-II is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™ display. Ten sensitivity settings allow for finer adjustment of the detection level, and four frequency selections help to prevent crosstalk in multi-loop applications.

Features:
  • ULTRAMETER™ displays optimum sensitivity setting / diagnostic aid
  • Fail safe in the event of a loop failure
  • Fail secure in the event of a power loss
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
  • 4 operating frequencies
  • Lightning and surge protection
  • Frequency counter
  • Fail safe operation
  • CE compliant
Specifications:
  • Power Supply: 12-24 VDC/AC
  • Current Draw: 18 mA max.
  • Dimensions: L=3.0in (76 mm) W=0.9in (22 mm) H=2.75in (70 mm)
  • Weight: 0.15 lbs.(69g)
  • Loop Inductance: 20…2000µH (Q factor >5)
  • Environmental Tracking: Automatic Compensation
  • Operating Environment: -40° C to 82° C (-40°F to 180° F) 0 to 95% relative humidity
  • Housing Material: ABS
  • Connection: 7 position screw terminal
  • Loop Compensation: Isolation transformer allows operation with poor quality loops
  • Loop Frequency: 4 settings (low, med-low, med-hi, high)
  • Surge Protection: Loop circuitry protected by surge suppressors
  • ULTRAMETER Display: Indicates optimum sensitivity level
  • Ouput: Relay 1A @24 VDC Common, Normally Open, Normally Closed
  • Power/Loop Fault Indicator: Green LED
  • Detect/Frequency Count Indicator: Red LED
  • Frequency Count: To aid in detector set up and prevention of crosstalk
  • Pulse/Presence: Allows the relay output to send either a pulse output or have constant presence
  • Sensitivity: 10 levels, 0-9
  • ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high bed vehicles

Specifications

Vendor Item No.
ULTRA 2 D-TEK
Item Category Code
SAFETY

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.