Electromechanical automation for rack sliding gates up to 1,100Lbs and 75 Feet.

Kit Includes:
1 - BFT DEIMOS BT UL/CSA KR925228 00003
1 - BFT Monitored Photoelectric Beam Sensor (Retro-Reflective Type) KIRREFLPHOT001 - BFT-KIRREFLPOTO01
1 - BFT 2-Channel Mitto B Rcb02 R1 Transmitter - BFT-D111904
Features:
SMART TECNOLOGY

• Electromechanical microswitches that control the end of stroke.
• Incorporated two-channel rolling code radio receiver.
• Self contained control panel unit with self-learning and self-diagnostic functions.
• Control unit compatible with the EElink protocol and Solor compatiable with “Ecosol” solar kit
• SAFE USE
• This version powered at 24V has been specially designed for simpler and faster installation in compliance with latest safety standards.
• The 24 V electrical motor guarantees maximum accuracy in torque and speed control on the one hand, and on the other makes it suitable for intensive gate use, even in industrial installations.Optional battery back-up can be fitted within the operator casing. These operators are all “Ecosol” solar compatible.
• Thanks to the obstruction sensing device, the operator reverses motion and prevents damage to people and vehicles in the event of contact.

Specifications:
Control panel: QSC D UL (incorporated)

• Reversible/irreversible operator: irreversible
• Power supply: 120 V 60 Hz single-phase
• Absorbed power: 0.1 hp (70 W)
• Thermal protection: integrated in the control unit
• Leaf speed: 7.9 ips (12 m/min)
• Output rotational speed: 79 rpm
• Pinion pitch: 4 mm (14 teeth)
• Impact reaction: electronic torque limiter
• Limit switches: electromechanical
• Manual release: mechanical release with knob
• Operating cycle: intensive use
• Environmental conditions: from 5°F (-15°C) to 122°F (+50°C)
• Degree of protection: IP24
• Operator weight: 16 lbs (~7 kg)
• Dimensions: see drawing next page