DoorKing 9100-380 - Vehicular 1/2HP Slide Gate Operator for up to 30', 1000lb. Gate
Item No. 9100-380
Loading
KEY FEATURES Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail Automatic self-setting limits mean no limit switch adjustments – ever Safety – built-in mechanical and electronic reverse system Advanced microprocessor control board features programming
Description
KEY FEATURES
MECHANICAL
- Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail
- Automatic self-setting limits mean no limit switch adjustments – ever
- Safety – built-in mechanical and electronic reverse system
- Advanced microprocessor control board features programming switches to set the mode of operation required and has ports for DKS plug-in loop detectors to simplify wiring
- 5-Year limited warranty
MECHANICAL
- Frame: G90 galvanized steel to prevent rusting
- Cover: Steel or polypropylene cover available
- Primary Reduction: Single cog belt
- Speed: Approximately 10 in/sec (254 mm/sec)
- Chain: Unit is shipped with 20 ft (6 m) of #40 roller chain, chain brackets, hardware
- Fail-safe release standard
- Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
- Heater kit for cold weather environments
- Base plate for post mounting
- Fail-secure release kit
- Automatic limit adjustment
- Auto-close timer 1-23 sec
- Selectable stop / reverse loop function
- Built-in On / Off switch
- Built-in alarm reset switch
- Programming switches allow you to set desired mode of operation
- Partial-open and anti-tailgating features
- Two 115 VAC convenience outlets for accessory transformers
- Automatically assumes fail-safe mode when an entrapment condition exists
- Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only)
- Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.
- Environmental: 10°F to 140°F (-12°C to 62°C)
- Thermostatically controlled heater kit recommended for colder environmentst.
- Shipping weight approximately 125-185 lb (68-84 kg)
- Operator requires monitored Type B1 and/or Type B2 entrapment protection devices
Specifications
- Vendor Item No.
- 9100-380
- Item Category Code
- SLIDE
Loading
DoorKing 9100-380 - Vehicular 1/2HP Slide Gate Operator for up to 30', 1000lb. Gate
Item No. 9100-380
KEY FEATURES Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail Automatic self-setting limits mean no limit switch adjustments – ever Safety – built-in mechanical and electronic reverse system Advanced microprocessor control board features programming
Description
KEY FEATURES
MECHANICAL
- Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail
- Automatic self-setting limits mean no limit switch adjustments – ever
- Safety – built-in mechanical and electronic reverse system
- Advanced microprocessor control board features programming switches to set the mode of operation required and has ports for DKS plug-in loop detectors to simplify wiring
- 5-Year limited warranty
MECHANICAL
- Frame: G90 galvanized steel to prevent rusting
- Cover: Steel or polypropylene cover available
- Primary Reduction: Single cog belt
- Speed: Approximately 10 in/sec (254 mm/sec)
- Chain: Unit is shipped with 20 ft (6 m) of #40 roller chain, chain brackets, hardware
- Fail-safe release standard
- Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
- Heater kit for cold weather environments
- Base plate for post mounting
- Fail-secure release kit
- Automatic limit adjustment
- Auto-close timer 1-23 sec
- Selectable stop / reverse loop function
- Built-in On / Off switch
- Built-in alarm reset switch
- Programming switches allow you to set desired mode of operation
- Partial-open and anti-tailgating features
- Two 115 VAC convenience outlets for accessory transformers
- Automatically assumes fail-safe mode when an entrapment condition exists
- Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only)
- Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.
- Environmental: 10°F to 140°F (-12°C to 62°C)
- Thermostatically controlled heater kit recommended for colder environmentst.
- Shipping weight approximately 125-185 lb (68-84 kg)
- Operator requires monitored Type B1 and/or Type B2 entrapment protection devices
Specifications
- Vendor Item No.
- 9100-380
- Item Category Code
- SLIDE