Top of the page

MAX SUPER ARM 2300 - Heavy-Duty Commercial Linear Actuator

Item No. MAX SUPER ARM 2300
Clutch release on 3-ton impact makes the Super Arm the first true commercial actuator. The Super Arm 2300 by Maximum Controls is the first true commercial actuator available on the market. What makes an actuator “commercial” you may ask? We think the following criteria has to be met: If a gate is st

Description

Clutch release on 3-ton impact makes the Super Arm the first true commercial actuator. The Super Arm 2300 by Maximum Controls is the first true commercial actuator available on the market. What makes an actuator “commercial” you may ask? We think the following criteria has to be met:
  • If a gate is struck by a vehicle while in motion the actuator should not break.
  • The actuator must run on 230 VAC or 115 VAC.
  • SAMS or PAMS sequencing must be compatible.
  • The actuator must move a heavy gate in extreme conditions.
  • True RPM ramp up and ramp down must be employed.
  • Continuous duty cycle is imperative.
  • A professional control board is a must.
  • An industry standard 10 pin loop rack for easy access and safety.
  • Separate external loop detector inputs for complex scenarios.
  • Emergency reversal sensitivity selectable on open and close cycles.
  • The actuator must supply a gate in motion strobe output.
  •  Work with a range of monitored safety devices.
Gate Capacity:
Arm Extended to 8' Gate Width:  Max Gate Weight of 2300 lbs.
Arm Extended to 12' Gate Width:  Max Gate Weight of 2000 lbs.
Arm Extended to 16' Gate Width:  Max Gate Weight of 1800 lbs.
Arm Extended to 18' Gate Width:  Max Gate Weight of 1500 lbs.

Technical Specifications:
  • Shipping weight of Actuator: Super Arm (35 lbs.)
  • Shipping weight of AC Control Box (38 lbs.)
  • The patented brake system allows the operator to retract with extreme force. When the force exceeds 3 tons, the clutch releases upon impact then automatically resets. Causes for clutch release include a vehicle strike while the gate is in motion.
  • Stainless steel output shaft
  • Direct gear drive (no internal chains, belts, or pulleys)
  • Mechanical and electrical gate release functions
  • Corrosion protection: gold zinc and powder coated aluminum housing.
  • High cycles at extreme temperature ranges. No overheating
  • Intelligent ramp-up and ramp-down for smooth gate operation
Safety Specifications:
  • High traffic intuitive loop management system for exceptional security
  • Advanced security features with built-in audible and remote alarms
  • Magnetic lock control relay outputs with selectable delay times
  • Tamper alert relay output triggers “on” if gate is forced open.
  • Audible alarm if gate is tampered with or ERD is triggered for heightened security.
  • Steel cover with lock protects against intruders and vandalism.
  • Gate disable feature disables all inputs with exception of the fire department and Max Open input for increased security.
  • Built in transaction buffer.
  • Gate status outputs for gate monitoring
  • Key activated jog function for emergency OPEN/CLOSE function
  • Advanced anti-tailgate feature prevents unwanted intrusion.

Specifications

Vendor Item No.
SUPER ARM 2300
Item Category Code
SWING
Vendor No.
MAXIMUM CONTROLS

MAX SUPER ARM 2300 - Heavy-Duty Commercial Linear Actuator

Item No. MAX SUPER ARM 2300
Clutch release on 3-ton impact makes the Super Arm the first true commercial actuator. The Super Arm 2300 by Maximum Controls is the first true commercial actuator available on the market. What makes an actuator “commercial” you may ask? We think the following criteria has to be met: If a gate is st

Description

Clutch release on 3-ton impact makes the Super Arm the first true commercial actuator. The Super Arm 2300 by Maximum Controls is the first true commercial actuator available on the market. What makes an actuator “commercial” you may ask? We think the following criteria has to be met:
  • If a gate is struck by a vehicle while in motion the actuator should not break.
  • The actuator must run on 230 VAC or 115 VAC.
  • SAMS or PAMS sequencing must be compatible.
  • The actuator must move a heavy gate in extreme conditions.
  • True RPM ramp up and ramp down must be employed.
  • Continuous duty cycle is imperative.
  • A professional control board is a must.
  • An industry standard 10 pin loop rack for easy access and safety.
  • Separate external loop detector inputs for complex scenarios.
  • Emergency reversal sensitivity selectable on open and close cycles.
  • The actuator must supply a gate in motion strobe output.
  •  Work with a range of monitored safety devices.
Gate Capacity:
Arm Extended to 8' Gate Width:  Max Gate Weight of 2300 lbs.
Arm Extended to 12' Gate Width:  Max Gate Weight of 2000 lbs.
Arm Extended to 16' Gate Width:  Max Gate Weight of 1800 lbs.
Arm Extended to 18' Gate Width:  Max Gate Weight of 1500 lbs.

Technical Specifications:
  • Shipping weight of Actuator: Super Arm (35 lbs.)
  • Shipping weight of AC Control Box (38 lbs.)
  • The patented brake system allows the operator to retract with extreme force. When the force exceeds 3 tons, the clutch releases upon impact then automatically resets. Causes for clutch release include a vehicle strike while the gate is in motion.
  • Stainless steel output shaft
  • Direct gear drive (no internal chains, belts, or pulleys)
  • Mechanical and electrical gate release functions
  • Corrosion protection: gold zinc and powder coated aluminum housing.
  • High cycles at extreme temperature ranges. No overheating
  • Intelligent ramp-up and ramp-down for smooth gate operation
Safety Specifications:
  • High traffic intuitive loop management system for exceptional security
  • Advanced security features with built-in audible and remote alarms
  • Magnetic lock control relay outputs with selectable delay times
  • Tamper alert relay output triggers “on” if gate is forced open.
  • Audible alarm if gate is tampered with or ERD is triggered for heightened security.
  • Steel cover with lock protects against intruders and vandalism.
  • Gate disable feature disables all inputs with exception of the fire department and Max Open input for increased security.
  • Built in transaction buffer.
  • Gate status outputs for gate monitoring
  • Key activated jog function for emergency OPEN/CLOSE function
  • Advanced anti-tailgate feature prevents unwanted intrusion.

Specifications

Vendor Item No.
SUPER ARM 2300
Item Category Code
SWING
Vendor No.
MAXIMUM CONTROLS

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.