Byan G102 - 600 Series Swing Gate Operator (115V 1/6HP for up to 2000lb./16-ft Gates)
Item No. 600 I-O
Loading
The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty. The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must mak
Description
The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty.
The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series travels at normal speed until it reaches the last 5 to 10 degrees of travel. It then automatically slows, negating the need for positive stop.
The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series travels at normal speed until it reaches the last 5 to 10 degrees of travel. It then automatically slows, negating the need for positive stop.
- 115 VAC Single Phase Built-in Thermal Overload
- Capacitor Rating:Â 35 UF/40 UF/10 UF
- Standard Working Pressure:Â 1,650 PSI
- Maximum Working Pressure:Â 1,750 PSI
- Pump:Â Spur Gear .50 LTR/Min.
- Motor:Â 1/6 Horsepower
- Amperage Draw:Â 4 Amps
- Operator Length (with piston retracted and rear bracket and swivel joint installed):Â 27.72 inches
- Operator Length (with piston extended and rear bracket and swivel joint installed):Â 35.59 inches
- Operator Width:Â 3.39 inches
- Operator Height:Â 4.33 inches (w/lock cover)
- Speed to 90 Degrees:12 Seconds
- Piston Stroke:Â 200 mm (7.87 inches)
- Ambient Operator Temperature Range:Â -60 to 220 Degrees F
- Hydraulic Fluid:Â Tellus T-15
- Adjustable Pressure Setting in Both Open and Closed Directions
- Shipping Weight:Â 26 lbs.
Specifications
- Vendor Item No.
- G102
- Item Category Code
- SWING
Loading
Byan G102 - 600 Series Swing Gate Operator (115V 1/6HP for up to 2000lb./16-ft Gates)
Item No. 600 I-O
The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty. The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must mak
Description
The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty.
The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series travels at normal speed until it reaches the last 5 to 10 degrees of travel. It then automatically slows, negating the need for positive stop.
The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series travels at normal speed until it reaches the last 5 to 10 degrees of travel. It then automatically slows, negating the need for positive stop.
- 115 VAC Single Phase Built-in Thermal Overload
- Capacitor Rating:Â 35 UF/40 UF/10 UF
- Standard Working Pressure:Â 1,650 PSI
- Maximum Working Pressure:Â 1,750 PSI
- Pump:Â Spur Gear .50 LTR/Min.
- Motor:Â 1/6 Horsepower
- Amperage Draw:Â 4 Amps
- Operator Length (with piston retracted and rear bracket and swivel joint installed):Â 27.72 inches
- Operator Length (with piston extended and rear bracket and swivel joint installed):Â 35.59 inches
- Operator Width:Â 3.39 inches
- Operator Height:Â 4.33 inches (w/lock cover)
- Speed to 90 Degrees:12 Seconds
- Piston Stroke:Â 200 mm (7.87 inches)
- Ambient Operator Temperature Range:Â -60 to 220 Degrees F
- Hydraulic Fluid:Â Tellus T-15
- Adjustable Pressure Setting in Both Open and Closed Directions
- Shipping Weight:Â 26 lbs.
Specifications
- Vendor Item No.
- G102
- Item Category Code
- SWING