BFT P930012 00007 - SUB R DX 120V Underground Hydraulic Swing Gate Opener (Right-Hand Orientation)
Item No. BFT P930012 00007
Loading
The BFT SUB R UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right-hand side of the driveway from inside the property. Simple Maintenance & Installation Maintenance is carri
Description
The BFT SUB R UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right-hand side of the driveway from inside the property.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
- Control Panel: RIGEL 6 (required, not included)
- Reversible/Irreversible Operator: Irreversible
- Power Supply: 120 V, 60 Hz single-phase
- Absorbed Power: 0.33 hp (250 W)
- Thermal Protection: Integrated
- Opening Angle: 125°
- Opening or Closing Time: 14s
- Slowdown: Opening / Closing
- Impact Reaction: Hydraulic clutch
- Lock: Hydraulic opening/closing
- Manual Release: Release key
- Operating Cycle: Intensive use
- Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
- Degree of Protection: IP67
- Operator Weight: 48 lbs
- Fuse Value Rigel 5 Board Transformer: 2A T
- Fuse Value Rigel 5 Board Logic Board: 1A T
Specifications
- Vendor Item No.
- P930012 00007
- Item Category Code
- SWING
Loading
BFT P930012 00007 - SUB R DX 120V Underground Hydraulic Swing Gate Opener (Right-Hand Orientation)
Item No. BFT P930012 00007
The BFT SUB R UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right-hand side of the driveway from inside the property. Simple Maintenance & Installation Maintenance is carri
Description
The BFT SUB R UL/CSA DX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11 ft 6 in long. The DX line of SUB swing gate openers has the motor is on the right-hand side of the driveway from inside the property.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
- Control Panel: RIGEL 6 (required, not included)
- Reversible/Irreversible Operator: Irreversible
- Power Supply: 120 V, 60 Hz single-phase
- Absorbed Power: 0.33 hp (250 W)
- Thermal Protection: Integrated
- Opening Angle: 125°
- Opening or Closing Time: 14s
- Slowdown: Opening / Closing
- Impact Reaction: Hydraulic clutch
- Lock: Hydraulic opening/closing
- Manual Release: Release key
- Operating Cycle: Intensive use
- Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
- Degree of Protection: IP67
- Operator Weight: 48 lbs
- Fuse Value Rigel 5 Board Transformer: 2A T
- Fuse Value Rigel 5 Board Logic Board: 1A T
Specifications
- Vendor Item No.
- P930012 00007
- Item Category Code
- SWING