BFT P930012 00008 - SUB R SX 120V Underground Hydraulic Swing Gate Opener (Left-Hand Orientation)
Item No. BFT P930012 00008
Loading
The BFT SUB R UL/CSA SX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11.5 ft long. The SX line of SUB swing gate openers has the motor on the left-hand side of the driveway from inside the property. Simple Maintenance & Installation Maintenance is carried out
Description
The BFT SUB R UL/CSA SX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11.5 ft long. The SX line of SUB swing gate openers has the motor on the left-hand side of the driveway from inside the property.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
- Control Panel: RIGEL 6 (required, not included)
- Reversible/Irreversible Operator: Irreversible
- Power Supply: 120 V, 60 Hz single-phase
- Absorbed Power: 0.33 hp (250 W)
- Thermal Protection: Integrated
- Opening Angle: 125°
- Opening or Closing Time: 14s
- Slowdown: Opening / Closing
- Impact Reaction: Hydraulic clutch
- Lock: Hydraulic opening/closing
- Manual Release: Release key
- Operating Cycle: Intensive use
- Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
- Degree of Protection: IP67
- Operator Weight: 48 lbs
- Fuse Value Rigel 5 Board Transformer: 2A T
- Fuse Value Rigel 5 Board Logic Board: 1A T
Specifications
- Vendor Item No.
- P930012 00008
- Item Category Code
- SWING
Loading
BFT P930012 00008 - SUB R SX 120V Underground Hydraulic Swing Gate Opener (Left-Hand Orientation)
Item No. BFT P930012 00008
The BFT SUB R UL/CSA SX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11.5 ft long. The SX line of SUB swing gate openers has the motor on the left-hand side of the driveway from inside the property. Simple Maintenance & Installation Maintenance is carried out
Description
The BFT SUB R UL/CSA SX hydraulic swing gate operator is capable of moving swing gates up to 1750 pounds and 11.5 ft long. The SX line of SUB swing gate openers has the motor on the left-hand side of the driveway from inside the property.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
Simple Maintenance & Installation
Maintenance is carried out without any need to raise or disassemble the gate. The SUB series of gate openers features a special foundation case that makes it possible to remove the operator without taking off the gate leaf.
- Control Panel: RIGEL 6 (required, not included)
- Reversible/Irreversible Operator: Irreversible
- Power Supply: 120 V, 60 Hz single-phase
- Absorbed Power: 0.33 hp (250 W)
- Thermal Protection: Integrated
- Opening Angle: 125°
- Opening or Closing Time: 14s
- Slowdown: Opening / Closing
- Impact Reaction: Hydraulic clutch
- Lock: Hydraulic opening/closing
- Manual Release: Release key
- Operating Cycle: Intensive use
- Environmental Conditions: From 14°F (-10°C) to 140°F (+60°C)
- Degree of Protection: IP67
- Operator Weight: 48 lbs
- Fuse Value Rigel 5 Board Transformer: 2A T
- Fuse Value Rigel 5 Board Logic Board: 1A T
Specifications
- Vendor Item No.
- P930012 00008
- Item Category Code
- SWING