Top of the page

DoorKing 1610-093 - Traffic Spike, HD, Flush-Mount, 6', Weighted w/Lock down

Item No. 1610-093
The Doorking 1610‑093 is a flush‑mount, heavy‑duty traffic spike system designed for enforcing one‑way traffic flow and controlling vehicle speed in controlled access areas. Key Features Flush in‑ground installation for a clean, low‑profile appearance. Weighted retraction spikes with a lock‑down

Description

The Doorking 1610‑093 is a flush‑mount, heavy‑duty traffic spike system designed for enforcing one‑way traffic flow and controlling vehicle speed in controlled access areas.
Key Features
  • Flush in‑ground installation for a clean, low‑profile appearance.
  • Weighted retraction spikes with a lock‑down function to hold spikes in place when needed.
  • Heavy‑duty construction with a 1/4" top plate and support rails for durability.
  • 6‑foot length for effective lane control.
  • Bright red paint for high visibility.
  • Stainless steel springs in standard versions; weighted (no‑spring) version also available.
  • Weight capacity: Standard spikes up to 8,000 lb per axle; heavy‑duty up to 20,000 lb per axle.
  • Automotive and light pickup truck use only.
Function & Use
The 1610‑093 is part of DoorKing’s 1610 Traffic Spikes series, used to:
  • Enforce one‑way traffic by physically blocking reverse movement.
  • Act as a speed control device when paired with a speed bump.
  • Provide vehicle entry/exit control in secure or restricted areas.
Safety note: DoorKing specifies that warning signs and speed bumps must be installed with traffic spikes to protect drivers and prevent tire damage from speeds over 5 mph. The system is not recommended for areas with freezing temperatures where snow/ice accumulation could occur.

Components (Heavy‑Duty Rev. A) 
  • 1/4" top plate HD
  • Rubber strip
  • Panel inner (10 units)
  • Bracket support with nut (20 units)
    • Spike tube
    • Dual weighted spike with lock‑down tab (9 units)
    • Weighted spike with lock‑down tab Rev C (2 units)
    • Tire spike right‑side panel

    Applications
    Commonly installed in:
    • Secure facility entrances/exits
    • One‑way traffic lanes
    • Speed control zones
    • Controlled access points in commercial, industrial, or residential settings

Technical data

Vendor Item No.
1610-093
Item Category Code
BOLLARDS

DoorKing 1610-093 - Traffic Spike, HD, Flush-Mount, 6', Weighted w/Lock down

Item No. 1610-093

Description

The Doorking 1610‑093 is a flush‑mount, heavy‑duty traffic spike system designed for enforcing one‑way traffic flow and controlling vehicle speed in controlled access areas.
Key Features
  • Flush in‑ground installation for a clean, low‑profile appearance.
  • Weighted retraction spikes with a lock‑down function to hold spikes in place when needed.
  • Heavy‑duty construction with a 1/4" top plate and support rails for durability.
  • 6‑foot length for effective lane control.
  • Bright red paint for high visibility.
  • Stainless steel springs in standard versions; weighted (no‑spring) version also available.
  • Weight capacity: Standard spikes up to 8,000 lb per axle; heavy‑duty up to 20,000 lb per axle.
  • Automotive and light pickup truck use only.
Function & Use
The 1610‑093 is part of DoorKing’s 1610 Traffic Spikes series, used to:
  • Enforce one‑way traffic by physically blocking reverse movement.
  • Act as a speed control device when paired with a speed bump.
  • Provide vehicle entry/exit control in secure or restricted areas.
Safety note: DoorKing specifies that warning signs and speed bumps must be installed with traffic spikes to protect drivers and prevent tire damage from speeds over 5 mph. The system is not recommended for areas with freezing temperatures where snow/ice accumulation could occur.

Components (Heavy‑Duty Rev. A) 
  • 1/4" top plate HD
  • Rubber strip
  • Panel inner (10 units)
  • Bracket support with nut (20 units)
    • Spike tube
    • Dual weighted spike with lock‑down tab (9 units)
    • Weighted spike with lock‑down tab Rev C (2 units)
    • Tire spike right‑side panel

    Applications
    Commonly installed in:
    • Secure facility entrances/exits
    • One‑way traffic lanes
    • Speed control zones
    • Controlled access points in commercial, industrial, or residential settings

Technical data

Vendor Item No.
1610-093
Item Category Code
BOLLARDS