DoorKing 6006-235 - Post Mount Rear Bracket for 6006 Operators
Item No. 6006-235
Loading
The DoorKing 6006-235 is a genuine weldable post mount rear bracket for DoorKing 6006 series swing gate operators. The rear bracket anchors the operator to the support post or wall, providing the fixed mounting point against which the operator arm pushes to drive the gate through its open and close
| Unit Tariff Amount | 0 |
Description
The DoorKing 6006-235 is a genuine weldable post mount rear bracket for DoorKing 6006 series swing gate operators. The rear bracket anchors the operator to the support post or wall, providing the fixed mounting point against which the operator arm pushes to drive the gate through its open and close cycles. The bracket is designed to be welded directly to a support post or steel plate or bolted using reinforcing steel plates for added strength. Proper installation requires the bracket to be level and securely fastened, as extreme force is exerted on this mounting point during gate cycling. Multiple mounting holes provide flexible positioning for various post configurations. Always consult your operator manual or parts diagram to verify compatibility and confirm correct positioning before ordering.
Key Features:
The DoorKing 6006-235 post mount rear bracket provides the critical fixed anchor point required for proper 6006 series swing gate operator function. Secure, level installation is essential for safe and reliable gate operation. Confirm compatibility with your specific operator model and verify bracket positioning requirements in your installation manual before ordering.
Key Features:
- Genuine DoorKing weldable post mount rear bracket for 6006 series swing gate operators
- Provides fixed anchor point for operator arm during gate open and close cycles
- Designed for direct welding to support post or steel plate for maximum strength
- Multiple mounting holes allow flexible positioning for various post configurations
- Bracket must be level and rigidly secured due to extreme force during gate cycling
- Verify compatibility by manual or parts diagram prior to purchase
- Part Number: 6006-235
- Component Type: Post mount rear bracket
- Installation: Weld directly to support post or steel plate, or bolt with reinforcing steel plates
- Compatibility: DoorKing 6006 series swing gate operators
- Manufacturer: DoorKing
- Condition: New, genuine OEM part
The DoorKing 6006-235 post mount rear bracket provides the critical fixed anchor point required for proper 6006 series swing gate operator function. Secure, level installation is essential for safe and reliable gate operation. Confirm compatibility with your specific operator model and verify bracket positioning requirements in your installation manual before ordering.
Technical data
- Vendor Item No.
- 6006-235
- Item Category Code
- REPLACEMENT PARTS
Loading
DoorKing 6006-235 - Post Mount Rear Bracket for 6006 Operators
Item No. 6006-235
| Unit Tariff Amount | : | 0 |
Description
The DoorKing 6006-235 is a genuine weldable post mount rear bracket for DoorKing 6006 series swing gate operators. The rear bracket anchors the operator to the support post or wall, providing the fixed mounting point against which the operator arm pushes to drive the gate through its open and close cycles. The bracket is designed to be welded directly to a support post or steel plate or bolted using reinforcing steel plates for added strength. Proper installation requires the bracket to be level and securely fastened, as extreme force is exerted on this mounting point during gate cycling. Multiple mounting holes provide flexible positioning for various post configurations. Always consult your operator manual or parts diagram to verify compatibility and confirm correct positioning before ordering.
Key Features:
The DoorKing 6006-235 post mount rear bracket provides the critical fixed anchor point required for proper 6006 series swing gate operator function. Secure, level installation is essential for safe and reliable gate operation. Confirm compatibility with your specific operator model and verify bracket positioning requirements in your installation manual before ordering.
Key Features:
- Genuine DoorKing weldable post mount rear bracket for 6006 series swing gate operators
- Provides fixed anchor point for operator arm during gate open and close cycles
- Designed for direct welding to support post or steel plate for maximum strength
- Multiple mounting holes allow flexible positioning for various post configurations
- Bracket must be level and rigidly secured due to extreme force during gate cycling
- Verify compatibility by manual or parts diagram prior to purchase
- Part Number: 6006-235
- Component Type: Post mount rear bracket
- Installation: Weld directly to support post or steel plate, or bolt with reinforcing steel plates
- Compatibility: DoorKing 6006 series swing gate operators
- Manufacturer: DoorKing
- Condition: New, genuine OEM part
The DoorKing 6006-235 post mount rear bracket provides the critical fixed anchor point required for proper 6006 series swing gate operator function. Secure, level installation is essential for safe and reliable gate operation. Confirm compatibility with your specific operator model and verify bracket positioning requirements in your installation manual before ordering.
Technical data
- Vendor Item No.
- 6006-235
- Item Category Code
- REPLACEMENT PARTS