Top of the page

DoorKing 9150-384 - Vehicular 1/2HP Slide Gate Operator for up to 30', 1000lb. Gate w/Metal Cover

Item No. 9150-384
Key Features  Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail   Automatic self-setting limits mean no limit switch adjustments – ever   Safety – built-in mechanical and electronic reverse system   Advanced microprocessor control board features prog

Description

Key Features 
  • Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail  
  • Automatic self-setting limits mean no limit switch adjustments – ever  
  • Safety – built-in mechanical and electronic reverse system  
  • Advanced microprocessor control board features programming switches to set the mode of operation required and has ports for DKS plug-in loop detectors to simplify wiring  
  • 5-Year limited warranty
Technical Specifications 
MECHANICAL
  • Frame: G90 galvanized steel to prevent rusting
  • Cover: Steel or polypropylene cover available
  • Primary Reduction: Single cog belt 
  • Speed: Approximately 10 in/sec (254 mm/sec)
  • Chain: Unit is shipped with 20 ft (6 m) of #40 roller chain, chain brackets, hardware
  • Fail-safe release standard
GATE TRACKERTM
  • Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
OPTIONS
  • Heater kit for cold weather environments
  • Base plate for post mounting
  • Fail-secure release kit
ELECTRICAL
  • Automatic limit adjustment
  • Auto-close timer 1-23 sec
  • Selectable stop / reverse loop function
  • Built-in On / Off switch
  • Built-in alarm reset switch
  • Programming switches allow you to set desired mode of operation
  • Partial-open and anti-tailgating features
  • Two 115 VAC convenience outlets for accessory transformers
  • Automatically assumes fail-safe mode when an entrapment condition exists
  • Ports for plug-in open and reverse loop detectors 
  • (DKS plug-in detectors only)
MISCELLANEOUS
  • Environmental: 10°F to 140°F (-12°C to 62°C)
  • Thermostatically controlled heater kit recommended for colder environments.
  • Operator requires monitored Type B1 and/or Type B2 entrapment protection devices
  • Shipping weight approximately 125-185 lb (68-84 kg)

Specifications

Vendor Item No.
9150-384
Item Category Code
SLIDE

DoorKing 9150-384 - Vehicular 1/2HP Slide Gate Operator for up to 30', 1000lb. Gate w/Metal Cover

Item No. 9150-384
Key Features  Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail   Automatic self-setting limits mean no limit switch adjustments – ever   Safety – built-in mechanical and electronic reverse system   Advanced microprocessor control board features prog

Description

Key Features 
  • Electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail  
  • Automatic self-setting limits mean no limit switch adjustments – ever  
  • Safety – built-in mechanical and electronic reverse system  
  • Advanced microprocessor control board features programming switches to set the mode of operation required and has ports for DKS plug-in loop detectors to simplify wiring  
  • 5-Year limited warranty
Technical Specifications 
MECHANICAL
  • Frame: G90 galvanized steel to prevent rusting
  • Cover: Steel or polypropylene cover available
  • Primary Reduction: Single cog belt 
  • Speed: Approximately 10 in/sec (254 mm/sec)
  • Chain: Unit is shipped with 20 ft (6 m) of #40 roller chain, chain brackets, hardware
  • Fail-safe release standard
GATE TRACKERTM
  • Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
OPTIONS
  • Heater kit for cold weather environments
  • Base plate for post mounting
  • Fail-secure release kit
ELECTRICAL
  • Automatic limit adjustment
  • Auto-close timer 1-23 sec
  • Selectable stop / reverse loop function
  • Built-in On / Off switch
  • Built-in alarm reset switch
  • Programming switches allow you to set desired mode of operation
  • Partial-open and anti-tailgating features
  • Two 115 VAC convenience outlets for accessory transformers
  • Automatically assumes fail-safe mode when an entrapment condition exists
  • Ports for plug-in open and reverse loop detectors 
  • (DKS plug-in detectors only)
MISCELLANEOUS
  • Environmental: 10°F to 140°F (-12°C to 62°C)
  • Thermostatically controlled heater kit recommended for colder environments.
  • Operator requires monitored Type B1 and/or Type B2 entrapment protection devices
  • Shipping weight approximately 125-185 lb (68-84 kg)

Specifications

Vendor Item No.
9150-384
Item Category Code
SLIDE

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.Â