Top of the page

DoorKing 9220-381 - Vehicular 2HP 208V 1-Phase Slide Gate Operator w/60' Chain for up to 1-Ton 100' Gates

Item No. 9220-381
TECHNICAL FEATURES MECHANICAL Primary reduction is provided by a 30:1 gear running in a continuous oil bath Operator is shipped with Chain Brackets, Hardware and 20 ft of #60 Chain Adjustable Solid State Speed Control, 1/2 to 2 ft/sec Housing is G90 Galvanized Steel painted charcoal grey with stainl

Description

TECHNICAL FEATURES
MECHANICAL
  • Primary reduction is provided by a 30:1 gear running in a continuous oil bath
  • Operator is shipped with Chain Brackets, Hardware and 20 ft of #60 Chain
  • Adjustable Solid State Speed Control, 1/2 to 2 ft/sec
  • Housing is G90 Galvanized Steel painted charcoal grey with stainless steel Access Door 
HPTMGATE TRACKER
  • Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
OPTIONS
  • Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used
  • Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length
  • Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed
ELECTRICAL
  • Fail-Secure Operator. Electrical Interlock prevents gate from starting during manual operation
  • Slow Start / Slow Stop
  • Adjustable Partial Open Limit
  • Selectable Stop / Reverse Loop Function
  • Anti-Tailgating Feature
  • Solid-State Motor Relays
  • Power Boost Start Circuit
  • Direct Driven Limit Switches for precise gate control
  • Built-In Power and Reset Switches
  • Two 115 VAC Convenience Outlets
  • Ports for plug-in Open and Reverse Loop Detectors (DKS Loop Detectors only)
MISCELLANEOUS
  • Environmental: 10°F to 140°F (-12°C to 62°C)
  • Thermostatically Controlled Heater Kit recommended for colder environments
  • Shipping weight approximately 225 lb (102 kg) Depending on model and options selected
SAFETY
  • This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc.
  • Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.

Specifications

Vendor Item No.
9220-381
Item Category Code
SLIDE

DoorKing 9220-381 - Vehicular 2HP 208V 1-Phase Slide Gate Operator w/60' Chain for up to 1-Ton 100' Gates

Item No. 9220-381
TECHNICAL FEATURES MECHANICAL Primary reduction is provided by a 30:1 gear running in a continuous oil bath Operator is shipped with Chain Brackets, Hardware and 20 ft of #60 Chain Adjustable Solid State Speed Control, 1/2 to 2 ft/sec Housing is G90 Galvanized Steel painted charcoal grey with stainl

Description

TECHNICAL FEATURES
MECHANICAL
  • Primary reduction is provided by a 30:1 gear running in a continuous oil bath
  • Operator is shipped with Chain Brackets, Hardware and 20 ft of #60 Chain
  • Adjustable Solid State Speed Control, 1/2 to 2 ft/sec
  • Housing is G90 Galvanized Steel painted charcoal grey with stainless steel Access Door 
HPTMGATE TRACKER
  • Reporting output provides operator data to a DKS 1833, 1835, 1837 or 1838 access control system (requires 2358 expansion board)
OPTIONS
  • Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used
  • Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length
  • Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed
ELECTRICAL
  • Fail-Secure Operator. Electrical Interlock prevents gate from starting during manual operation
  • Slow Start / Slow Stop
  • Adjustable Partial Open Limit
  • Selectable Stop / Reverse Loop Function
  • Anti-Tailgating Feature
  • Solid-State Motor Relays
  • Power Boost Start Circuit
  • Direct Driven Limit Switches for precise gate control
  • Built-In Power and Reset Switches
  • Two 115 VAC Convenience Outlets
  • Ports for plug-in Open and Reverse Loop Detectors (DKS Loop Detectors only)
MISCELLANEOUS
  • Environmental: 10°F to 140°F (-12°C to 62°C)
  • Thermostatically Controlled Heater Kit recommended for colder environments
  • Shipping weight approximately 225 lb (102 kg) Depending on model and options selected
SAFETY
  • This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc.
  • Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.

Specifications

Vendor Item No.
9220-381
Item Category Code
SLIDE

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.