Top of the page

FAAC 104475 - 412 DX Swing Gate Right Hinge Arm Only (115VAC)

Item No. 104475
The FAAC 412 is a self-contained compact operator that consists of an electric motor that drives a worm screw housed in an aluminum casing. The system locks mechanically; therefore, no electric lock is required. Positive stops are required. The 412 operator is designed and built to automate vehicula

Description

The FAAC 412 is a self-contained compact operator that consists of an electric motor that drives a worm screw housed in an aluminum casing. The system locks mechanically; therefore, no electric lock is required. Positive stops are required.

The 412 operator is designed and built to automate vehicular swing leaf gates. Do not use it for any other purpose.

FEATURES
  • Designed for light residential, single-family use
  • Mechanical lock in the open and close position
  • Built in manual release in case of power failure
  • Simple installation and maintenance.
  • Anti-crushing safety thanks to the electronic control board
  • UL 325 Compliant
TECHNICAL SPECIFICATIONS
  • Input voltage: 115 VAC (+10% -6%)
  • Power: 280 W
  • Current: 3 A
  • Thrust Capacitor: 25 uF
  • Thrust force: 719 lbf (320 daN)
  • Motor: Asynchronous single phase
  • 90° opening time: Approx. 16 sec
  • Rod stroke: 11.4 in (290 mm)
  • Leaf minimum width: 6 ft (1.83m)
  • Leaf maximum width: 14 ft (4.2 m)
  • Leaf maximum weight: 500 lb. (226.8 Kg)
  • Use frequency (cycles per hour): 18
  • Thermal protection on motor winding: 284 °F (140 °C)
  • Operating ambient temperature: -4°F - 131°F (-20 °C to +55 °C)
  • Protection class: IP 44
  • Operator weight: 14.3 lb. (6.5 kg)
  • Dimensions (L x D x H): 39.3 x 3.5 x 7.7 in (1000x90x195mm)
NOTES
  • Mounting dimensions, wind factor, and gate design will affect performance specification
  • Use frequency is measured at an ambient temperature of 72 °F 20 °C). Temperature variation will affect it
  • An electric or magnetic lock is recommended for any gate longer than 12 ft (3.6 m)
  • Positive gate stops, which limit gate travel, are required in the opened and closed positions
MANUFACTURER'S WARRANTY PERIOD
3 years

Specifications

Vendor Item No.
104475
Item Category Code
SWING

FAAC 104475 - 412 DX Swing Gate Right Hinge Arm Only (115VAC)

Item No. 104475
The FAAC 412 is a self-contained compact operator that consists of an electric motor that drives a worm screw housed in an aluminum casing. The system locks mechanically; therefore, no electric lock is required. Positive stops are required. The 412 operator is designed and built to automate vehicula

Description

The FAAC 412 is a self-contained compact operator that consists of an electric motor that drives a worm screw housed in an aluminum casing. The system locks mechanically; therefore, no electric lock is required. Positive stops are required.

The 412 operator is designed and built to automate vehicular swing leaf gates. Do not use it for any other purpose.

FEATURES
  • Designed for light residential, single-family use
  • Mechanical lock in the open and close position
  • Built in manual release in case of power failure
  • Simple installation and maintenance.
  • Anti-crushing safety thanks to the electronic control board
  • UL 325 Compliant
TECHNICAL SPECIFICATIONS
  • Input voltage: 115 VAC (+10% -6%)
  • Power: 280 W
  • Current: 3 A
  • Thrust Capacitor: 25 uF
  • Thrust force: 719 lbf (320 daN)
  • Motor: Asynchronous single phase
  • 90° opening time: Approx. 16 sec
  • Rod stroke: 11.4 in (290 mm)
  • Leaf minimum width: 6 ft (1.83m)
  • Leaf maximum width: 14 ft (4.2 m)
  • Leaf maximum weight: 500 lb. (226.8 Kg)
  • Use frequency (cycles per hour): 18
  • Thermal protection on motor winding: 284 °F (140 °C)
  • Operating ambient temperature: -4°F - 131°F (-20 °C to +55 °C)
  • Protection class: IP 44
  • Operator weight: 14.3 lb. (6.5 kg)
  • Dimensions (L x D x H): 39.3 x 3.5 x 7.7 in (1000x90x195mm)
NOTES
  • Mounting dimensions, wind factor, and gate design will affect performance specification
  • Use frequency is measured at an ambient temperature of 72 °F 20 °C). Temperature variation will affect it
  • An electric or magnetic lock is recommended for any gate longer than 12 ft (3.6 m)
  • Positive gate stops, which limit gate travel, are required in the opened and closed positions
MANUFACTURER'S WARRANTY PERIOD
3 years

Specifications

Vendor Item No.
104475
Item Category Code
SWING

About Southwest Automated

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals.

© Copyright 2023 Southwest Automated Security, Inc. All rights reserved. 


About Southwest Automated Security

Established over 30 years ago in Dallas, TX, Southwest Automated Security, Inc. has a history of maintaining excellent relationships with vendors and dealers alike. From exceptional levels of product knowledge and customer service- to partnering with leading manufacturers of wholesale electronic security, we are firmly committed to developing all-inclusive security solutions that aid dealers in achieving their project goals
© Copyright 2023 Southwest Automated Security, Inc. All rights reserved.